Wave Deformation in Front of Vertical Wall Due to Wave Overtopping

1994 ◽  
Vol 120 (5) ◽  
pp. 490-498 ◽  
Author(s):  
Motohiko Umeyama
Keyword(s):  
Vertical Wall ◽  
Wave Overtopping ◽  
Wave Deformation

scholarly journals APPLICATION OF SMOOTHED PARTICLE HYDRODYNAMICS IN EVALUATING THE PERFORMANCE OF COASTAL RETROFIT STRUCTURES

2018 ◽  
pp. 109 ◽  
Author(s):  
Soroush Abolfathi ◽  
Dong Shudi ◽  
Sina Borzooei ◽  
Abbas Yeganeh-Bakhtiari ◽  
Jonathan Pearson
Keyword(s):  
Numerical Model ◽  
Smoothed Particle Hydrodynamics ◽  
Vertical Wall ◽  
Laboratory Data ◽  
Wave Structure ◽  
Base Case ◽  
Submerged Breakwater ◽  
Wave Overtopping ◽  
Particle Hydrodynamics ◽  
Smoothed Particle

This study develops an accurate numerical tool for investigating optimal retrofit configurations in order to minimize wave overtopping from a vertical seawall due to extreme climatic events and under changing climate. A weakly compressible smoothed particle hydrodynamics (WCSPH) model is developed to simulate the wave-structure interactions for coastal retrofit structures in front of a vertical seawall. A range of possible physical configurations of coastal retrofits including re-curve wall and submerged breakwater are modelled with the numerical model to understand their performance under different wave and structural conditions. The numerical model is successfully validated against laboratory data collected in 2D wave flume at Warwick Water Laboratory. The findings of numerical modelling are in good agreement with the laboratory data. The results indicate that recurve wall is more effective in mitigating wave overtopping and provides more resilience to coastal flooding in comparison to base-case (plain vertical wall) and submerged breakwater retrofit.

scholarly journals VERTICAL SEA WALL CREST MODIFICATIONS FOR OVERTOPPING

2018 ◽  
pp. 71
Author(s):  
Dogan Kisacik ◽  
Gulizar Ozyurt Tarakcioglu ◽  
Cuneyt Baykal ◽  
Gokhan Kaboglu
Keyword(s):  
Urban Areas ◽  
Vertical Wall ◽  
Breaking Wave ◽  
Limited Information ◽  
Coastal Structures ◽  
Wave Overtopping ◽  
Wave Basin ◽  
First Results ◽  
Set Up ◽  
Sea Wall

Crest modifications such as a storm wall, parapet or a bullnose are widely used to reduce the wave overtopping over coastal structures where spatial and visual demands restrict the crest heights, especially in urban areas. Although reduction factors of these modifications have been studied for sloped structures in EurOtop Manual (2016), there is limited information regarding the vertical structures. This paper presents the experimental set-up and first results of wave overtopping tests for a vertical wall with several different super structure types: a) seaward storm wall, b) sloping promenade, c) landward storm wall, d) stilling wave basin (SWB), e) seaward storm wall with parapet, f) landward storm wall on the horizontal promenade with parapet, g) landward storm wall with parapet, h) stilling wave basin (SWB) with parapet, under breaking wave conditions. The SWB is made up of a seaward storm wall (may be a double shifted rows) , a sloping promenade (basin) and a landward storm wall. The seaward storm wall is partially permeable to allow the evacuation of the water in the basin.

scholarly journals APPLICATION OF SMOOTHED PARTICLE HYDRODYNAMICS IN EVALUATING THE PERFORMANCE OF COASTAL RETROFIT STRUCTURES

2018 ◽  
Vol 1 (36) ◽  
pp. 109 ◽  
Author(s):  
Soroush Abolfathi ◽  
Dong Shudi ◽  
Sina Borzooei ◽  
Abbas Yeganeh-Bakhtiari ◽  
Jonathan Pearson
Keyword(s):  
Numerical Model ◽  
Smoothed Particle Hydrodynamics ◽  
Vertical Wall ◽  
Laboratory Data ◽  
Wave Structure ◽  
Base Case ◽  
Submerged Breakwater ◽  
Wave Overtopping ◽  
Particle Hydrodynamics ◽  
Smoothed Particle

This study develops an accurate numerical tool for investigating optimal retrofit configurations in order to minimize wave overtopping from a vertical seawall due to extreme climatic events and under changing climate. A weakly compressible smoothed particle hydrodynamics (WCSPH) model is developed to simulate the wave-structure interactions for coastal retrofit structures in front of a vertical seawall. A range of possible physical configurations of coastal retrofits including re-curve wall and submerged breakwater are modelled with the numerical model to understand their performance under different wave and structural conditions. The numerical model is successfully validated against laboratory data collected in 2D wave flume at Warwick Water Laboratory. The findings of numerical modelling are in good agreement with the laboratory data. The results indicate that recurve wall is more effective in mitigating wave overtopping and provides more resilience to coastal flooding in comparison to base-case (plain vertical wall) and submerged breakwater retrofit.

scholarly journals EXPECTED DISCHARGE OP IRREGULAR WAVE OVERTOPPING

1968 ◽  
Vol 1 (11) ◽  
pp. 54 ◽  
Author(s):  
Senri Tsuruta ◽  
Yoshimi Goda
Keyword(s):  
Vertical Wall ◽  
Laboratory Data ◽  
Irregular Waves ◽  
Linear Summation ◽  
Wave Overtopping ◽  
Irregular Wave ◽  
Concrete Blocks ◽  
Vertical Walls ◽  
Expected Values ◽  
Sea Wall

An experiment was carried out on the overtopping of mechanically generated irregular waves over vertical walls. The experimental discharge was almost in agreement with the expected discharge which had been calculated with the wave height histogram and the data of regular wave overtopping based on the principle of linear summation. The expected values of overtopping discharge were calculated for various laboratory data, which had been represented in a unified form of non-dimensional quantities. The calculation has yielded two diagrams of expected overtopping discharge, one for the sea wall of vertical wall type and the othei for the sea wall covered with artificial concrete blocks.

Numerical Simulation of Wave Overtopping Based on DualSPHysics

2013 ◽  
Vol 405-408 ◽  
pp. 1463-1471 ◽  
Author(s):  
Xing Ye Ni ◽  
Wei Bin Feng
Keyword(s):  
Numerical Simulation ◽  
Vertical Wall ◽  
Breaking Waves ◽  
Numerical Wave Tank ◽  
Regular Wave ◽  
Average Deviation ◽  
Wave Overtopping ◽  
Different Types ◽  
Numerical Wave ◽  
Run Up

To obtain a more detailed description of wave overtopping, a 2-D numerical wave tank is presented based on an open-source SPH platform named DualSPHysics, using a source generation and absorption technology suited for SPH methods with analytical relaxation approach. Numerical simulation of regular wave run-up and overtopping on typical sloping dikes is carried out and satisfactory agreements are shown between numerical results and experimental data. Another overtopping simulation of regular wave is conducted against six different types of seawalls (vertical wall, curved wall, recurved wall, 1:3 slope with smooth face, 1:1.5 slope with smooth face and 1:1.5 slope with stepped-face), which represents the details of various breaking waves interacting with different seawalls, and the average deviation of wave overtopping rate is 6.8%.

scholarly journals WAVE-INDUCED OVERWASH AND DESTRUCTION OF SAND DUNES

2011 ◽  
Vol 1 (32) ◽  
pp. 34 ◽  
Author(s):  
Jens Figlus ◽  
Nobuhisa Kobayashi ◽  
Christine Gralher ◽  
Vicente Iranzo
Keyword(s):  
Morphological Changes ◽  
Sand Dunes ◽  
Vertical Wall ◽  
Laboratory Data ◽  
Complex Interaction ◽  
Empirical Parameter ◽  
Wave Overtopping ◽  
Dry Zone ◽  
Profile Changes ◽  
Wave Induced

Numerical modeling of the rapid dune profile changes that may occur due to wave overtopping and sediment overwash during a storm is challenging. One of the reasons is the limited amount of available field and laboratory data related to the problem. Another reason is the complex interaction of hydrodynamics, morphological changes and sediment transport in the intermittently wet and dry zone of the dune profile. We modified the cross-shore numerical model CSHORE on the basis of three laboratory overwash tests with different dune geometries in front of a low-crested vertical wall to include the capability to predict profile evolution due to wave overtopping and overwash. Experimental results show that the transition from minor to major overwash is fairly rapid and that the resilience of the dune against destruction by wave-induced overwash is dependent on its geometry. Computed results compare well with the measured hydrodynamics, profile changes, wave overtopping rates and sediment overwash rates, requiring only one empirical parameter to be calibrated. Only the erosion in front of the vertical wall in the last phase of each test is not predicted well by the model. Additional comparisons with field data on profile evolution involving overwash verifies the field capabilities of CSHORE.

scholarly journals REDUCTION ON WAVE OVERTOPPING ON A SMOOTH DIKE BY MEANS OF A PARAPET

2011 ◽  
Vol 1 (32) ◽  
pp. 6 ◽  
Author(s):  
Koen Van Doorslaer ◽  
Julien De Rouck
Keyword(s):  
Vertical Wall ◽  
Breaking Waves ◽  
Wave Overtopping ◽  
Optimal Geometry ◽  
Efficient Construction ◽  
Major Reduction ◽  
Crest Height ◽  
Reduction Factors

A return wall or parapet is a very efficient construction built to reduce wave overtopping over sea structures. One of its main advantages is that this relative small construction can be built in a dike without increasing the crest height yet creating a major reduction in wave overtopping. In this paper only non-breaking waves attacking smooth dikes are investigated. A normal smooth dike, a smooth dike with vertical wall and a smooth dike with parapet have been tested. The results lead to reduction factors for a vertical wall or a parapet that can be introduced in the van der Meer formulas for wave overtopping over smooth dikes. The optimal geometry of the parapet has been subject of the research as well.

Sign in / Sign up

Export Citation Format

Share Document