Flow Velocity and Water Layer Thickness at Vertical Ring Mesh Structures

2021 ◽  
Vol 147 (8) ◽  
pp. 04021024
Author(s):  
Ivo Baselt
2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Rehman S. Eon ◽  
Charles M. Bachmann

AbstractThe advent of remote sensing from unmanned aerial systems (UAS) has opened the door to more affordable and effective methods of imaging and mapping of surface geophysical properties with many important applications in areas such as coastal zone management, ecology, agriculture, and defense. We describe a study to validate and improve soil moisture content retrieval and mapping from hyperspectral imagery collected by a UAS system. Our approach uses a recently developed model known as the multilayer radiative transfer model of soil reflectance (MARMIT). MARMIT partitions contributions due to water and the sediment surface into equivalent but separate layers and describes these layers using an equivalent slab model formalism. The model water layer thickness along with the fraction of wet surface become parameters that must be optimized in a calibration step, with extinction due to water absorption being applied in the model based on equivalent water layer thickness, while transmission and reflection coefficients follow the Fresnel formalism. In this work, we evaluate the model in both field settings, using UAS hyperspectral imagery, and laboratory settings, using hyperspectral spectra obtained with a goniometer. Sediment samples obtained from four different field sites representing disparate environmental settings comprised the laboratory analysis while field validation used hyperspectral UAS imagery and coordinated ground truth obtained on a barrier island shore during field campaigns in 2018 and 2019. Analysis of the most significant wavelengths for retrieval indicate a number of different wavelengths in the short-wave infra-red (SWIR) that provide accurate fits to measured soil moisture content in the laboratory with normalized root mean square error (NRMSE)< 0.145, while independent evaluation from sequestered test data from the hyperspectral UAS imagery obtained during the field campaign obtained an average NRMSE = 0.169 and median NRMSE = 0.152 in a bootstrap analysis.


2019 ◽  
Vol 154 ◽  
pp. 103561 ◽  
Author(s):  
Patricia Mares-Nasarre ◽  
Gloria Argente ◽  
M. Esther Gómez-Martín ◽  
Josep R. Medina

2020 ◽  
Vol 2020 ◽  
pp. 1-10
Author(s):  
Feng Jiang ◽  
Weilin Xu ◽  
Jun Deng ◽  
Wangru Wei

In hydraulic engineering, intense free surface breakups have been observed to develop in high-speed open channel flows, resulting in a mixed air-water layer near the free surface that grows with the development of self-aeration. This region is characterized by a substantial number of droplets coexisting with an induced air layer above. Little information about this droplet layer is currently available and no practicable approach has been proposed for predicting the parameters of the induced air layer based on the related flow structures in the droplet layer. In this research, laboratory experiments were accordingly conducted to observe the detailed droplet layer development in terms of layer thickness, droplet size, and frequency distributions under comparative flow conditions. Based on the simplified droplet layer roughness determined using the experimentally measured mean droplet size, the classical power-law of boundary layer theory was applied to provide an analytical solution for the air velocity profile inside the air layer. The relationship of air layer growth to droplet layer thickness, which is a key factor when determining the air velocity distribution, was also established, and the analytical results were proven to be in reasonable agreement with air velocity profiles presented in the literature. By determining the relationship between droplet layer properties and air velocity profiles, the study establishes a basis for the improved modeling of high-speed open channel flows.


Author(s):  
Ruixuan Han ◽  
Yi Peng ◽  
Huailin Li

A new prediction model for the oxidation layer thickness of carbon steel is developed, that is based on the parabolic time law of corrosion and the mass transport balance theory. The relationship between the oxidation layer thickness and temperature, pH, and flow velocity is discussed. The predicted results show that the oxidation layer thickness increases exponentially with increasing temperature and decreases exponentially with increasing flow velocity. The oxidation layer thickness increases with increasing pH until pH=10.5 and then decreases. The predicted results agree with experimental results.


2018 ◽  
Vol 14 (03) ◽  
pp. 142
Author(s):  
Jinsuo Lu ◽  
Wei Zhang ◽  
Dengyu Wang ◽  
Xiaoyi Wang

<p class="16">Water intake with fixed height limits the application of selective withdrawal technology in a certain degree. This study proposes a technological idea to install baffles on water intake. Through the rotation of upper and lower baffle, poor water layer can be blocked. A Computational Fluid Dynamics (CFD) model for the upper baffle on water intake is constructed. The results show that the baffle installed on the upper part of orifice can reduce the withdrawal layer thickness and flow on the upper part of orifice centre. Thereby, the withdrawal flow on lower part can be indirectly increased. While, baffle length and inclining angle are the important factors to influence the withdrawal layer thickness and flow distribution. Therefore, the adjusting range of selective withdrawal can be economically enhanced by installing baffles on water intake.</p>


Sign in / Sign up

Export Citation Format

Share Document