Shrinkage Characteristics of Alkali-Activated High-Volume Fly-Ash Pastes Incorporating Silica Fume

2020 ◽  
Vol 32 (10) ◽  
pp. 04020307
Author(s):  
Hailong Ye ◽  
Le Huang
2020 ◽  
Vol 184 ◽  
pp. 01109
Author(s):  
C Chandana Priya ◽  
M V Seshagiri Rao ◽  
V Srinivasa Reddy ◽  
S Shrihari

SCC is expensive when compared with normal conventional concrete. Hence, it is desired to produce low cost SCC by replacing cement with higher percentages of fly ash, which is a no cost material and available in abundance. At the same time to achieve higher grade HVFASCC, micro silica which is otherwise condensed silica fume can also be used along with fly ash to enhance the strength properties of HVFASCC. By replacing fly ash in high volumes in the mix, high amount of pozzolanic material becomes available, majorly reactive silica, for which more calcium hydroxide is necessary for further pozzolanic reaction. As we are reducing cement quantity, the amount of calcium hydroxide available is reduced thus demanding external addition of hydrated lime which can be supplied as additive to cater to the need of calcium hydroxide required for reactive silica in fly ash.The present investigation aims to achieve strength for high volume fly ash self-compacting concrete. The replacement of cement with fly ash is made in 45%, 50%, 55%, 60%, 65% and 70% with 20% hydrated lime and 10% silica fume in one trial. In another trial, 30% hydrated lime and 10% silica fume is added with replacement of fly ash to cement varying in same percentages. The design mix is tested for workability and flowability and cubes are casted for compression strength test and tested at 28 day,, 56 day, and 90 day,.


2021 ◽  
Vol 13 (10) ◽  
pp. 5571
Author(s):  
Wesam Salah Alaloul ◽  
Muhammad Ali Musarat ◽  
Sani Haruna ◽  
Kevin Law ◽  
Bassam A. Tayeh ◽  
...  

The existing form of self-compacting concrete (SCC) comprises of a large amount of powdered and fine materials. In this study, a part of the cementitious material was replaced with constant high-volume fly ash, and a portion of fine aggregates was substituted by crumb rubber (CR). Besides that, silica fume (SF) was added, with the hope that by implementing a new type of nanomaterial, the loss in mechanical strength due to previous modifications such as rubberization and replacement will be prevented. Two variables were found to influence the constituent/component in the mix design: SF and CR. The proportion of SF varies from 0% to 10%, while that of CR from 0% to 30% by volume of the total river sand, where 55% of cement was replaced by the fly ash. A total of 13 rubberized SCC samples with CR and SF as controlling variables were made, and their design mix was produced by a Design of Experiment (DOE) under the Response Surface Methodology (RSM). The results reveal a slight increase in the mechanical properties with the addition of SF. The theoretical mathematical models and equation for each different mechanical strength were also developed after incorporating the experimental results into the software.


2007 ◽  
Vol 22 (4) ◽  
pp. 728-732 ◽  
Author(s):  
Xiaosheng Wei ◽  
Hongping Zhu ◽  
Guowei Li ◽  
Changqing Zhang ◽  
Lianzhen Xiao

2019 ◽  
Vol 138 (3) ◽  
pp. 2065-2075 ◽  
Author(s):  
Watcharapong Wongkeo ◽  
Pailyn Thongsanitgarn ◽  
Chi-Sun Poon ◽  
Arnon Chaipanich

2015 ◽  
Vol 1100 ◽  
pp. 36-43 ◽  
Author(s):  
Oleksandr Kovalchuk ◽  
Rostislav Drochytka ◽  
Pavel Krivenko

Hybrid alkali activated cements based on fly ashes because of their structure and characteristics of phase composition are able to be used in different materials with the unique service properties. The paper is enclosing some specific features of hybrid fly ash alkali activated cement mix design and structure formation in order to achieve materials for different applications.


Sign in / Sign up

Export Citation Format

Share Document