Geogrid Reinforcement to Reduce Pavement Section Thickness: A Case Study

2021 ◽

pp. 036119812110286

Author(s):

Wadi H. Imseeh ◽

Khalid A. Alshibli ◽

Murad Y. Abu-Farsakh ◽

Ted A. Kniazewycz

Keyword(s):

Sudden Change ◽

Fe Analysis ◽

Strip Footing ◽

Smooth Transition ◽

Potential Hazard ◽

Department Of Transportation ◽

Geogrid Reinforcement ◽

Approach Slab ◽

Bearing Stress

The approach slab is constructed at bridge ends to serve as a smooth transition from the highway pavement to the bridge deck. However, motorists usually complain about a sudden change in elevation (bump) at the highway/approach slab (H/S) joint that causes a potential hazard for public safety, damage to vehicles, and rider discomfort. This paper develops a finite element (FE) analysis for the differential settlement at the H/S joint when supported by a strip footing that sits on compacted layers of soil embankment with uniaxial geogrid reinforcement. A parametric study was conducted to select the optimum design that consists of five geogrid layers equally spaced within a depth of 2 [Formula: see text] below the strip footing, where [Formula: see text] is the width of the footing. The inclusion of geogrid reinforcement did not only enhance the ultimate bearing stress of the strip footing but also redistributed the vertical loads over a wider region of soil embankment and thus reduced settlement. A case study is also presented for modeling the performance of a preliminary design proposed by Tennessee Department of Transportation (TDOT) for the retrofit of bridge ends. The FE analysis showed a 30%–40% improvement in the ultimate bearing stress of the strip footing when the geogrid reinforcement proposed by TDOT is extended to a depth of 1.5 [Formula: see text] below the footing.

Download Full-text

The Genesis and Internal Dynamics of El Salvador's People's Revolutionary Army, 1970–1976

Behavioral and Brain Sciences ◽

10.1017/s0140525x13009850 ◽

2014 ◽

Vol 38 (01) ◽

pp. 102-129

Author(s):

ALBERTO MARTÍN ÁLVAREZ ◽

EUDALD CORTINA ORERO

Keyword(s):

Latin America ◽

El Salvador ◽

Early Years ◽

Left Wing ◽

Internal Dynamics ◽

Internal Coherence ◽

The 1960S

AbstractUsing interviews with former militants and previously unpublished documents, this article traces the genesis and internal dynamics of the Ejército Revolucionario del Pueblo (People's Revolutionary Army, ERP) in El Salvador during the early years of its existence (1970–6). This period was marked by the inability of the ERP to maintain internal coherence or any consensus on revolutionary strategy, which led to a series of splits and internal fights over control of the organisation. The evidence marshalled in this case study sheds new light on the origins of the armed Salvadorean Left and thus contributes to a wider understanding of the processes of formation and internal dynamics of armed left-wing groups that emerged from the 1960s onwards in Latin America.

Download Full-text

Culture and the plasticity of perception

Behavioral and Brain Sciences ◽

10.1017/s0140525x19002887 ◽

2020 ◽

Vol 43 ◽

Author(s):

Michael Lifshitz ◽

T. M. Luhrmann

Keyword(s):

Cultural Context ◽

Sensory Experience ◽

Cultural Learning ◽

The World

Abstract Culture shapes our basic sensory experience of the world. This is particularly striking in the study of religion and psychosis, where we and others have shown that cultural context determines both the structure and content of hallucination-like events. The cultural shaping of hallucinations may provide a rich case-study for linking cultural learning with emerging prediction-based models of perception.

Download Full-text

Dual systems for all: Higher-order, role-based relational reasoning as a uniquely derived feature of human cognition

Behavioral and Brain Sciences ◽

10.1017/s0140525x19000451 ◽

2019 ◽

Vol 42 ◽

Author(s):

Daniel J. Povinelli ◽

Gabrielle C. Glorioso ◽

Shannon L. Kuznar ◽

Mateja Pavlic

Keyword(s):

Temporal Reasoning ◽

Higher Order ◽

Important Case ◽

Human Cognition ◽

Relational Reasoning ◽

Dual Systems ◽

First Order ◽

Reasoning System ◽

Role Based

Abstract Hoerl and McCormack demonstrate that although animals possess a sophisticated temporal updating system, there is no evidence that they also possess a temporal reasoning system. This important case study is directly related to the broader claim that although animals are manifestly capable of first-order (perceptually-based) relational reasoning, they lack the capacity for higher-order, role-based relational reasoning. We argue this distinction applies to all domains of cognition.

Download Full-text

Sociocultural memory development research drives new directions in gadgetry science

Behavioral and Brain Sciences ◽

10.1017/s0140525x19000979 ◽

2019 ◽

Vol 42 ◽

Author(s):

Penny Van Bergen ◽

John Sutton

Keyword(s):

Episodic Memory ◽

Autobiographical Memory ◽

Developmental Psychology ◽

Cross Cultural ◽

Memory Development ◽

Development Research ◽

Cultural Research ◽

New Directions ◽

Cross Cultural Research

Abstract Sociocultural developmental psychology can drive new directions in gadgetry science. We use autobiographical memory, a compound capacity incorporating episodic memory, as a case study. Autobiographical memory emerges late in development, supported by interactions with parents. Intervention research highlights the causal influence of these interactions, whereas cross-cultural research demonstrates culturally determined diversity. Different patterns of inheritance are discussed.

Download Full-text

Construction of plastic contact deformation maps on ceramics: a case study on aluminum nitride

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100165641 ◽

1996 ◽

Vol 54 ◽

pp. 636-637

Author(s):

D. L. Callahan

Keyword(s):

Plastic Deformation ◽

Aluminum Nitride ◽

Mechanical Response ◽

Three Dimensional ◽

Bright Field Image ◽

Perfectly Plastic ◽

Contrast Analysis ◽

Deformation Patterns

Modern polishing, precision machining and microindentation techniques allow the processing and mechanical characterization of ceramics at nanometric scales and within entirely plastic deformation regimes. The mechanical response of most ceramics to such highly constrained contact is not predictable from macroscopic properties and the microstructural deformation patterns have proven difficult to characterize by the application of any individual technique. In this study, TEM techniques of contrast analysis and CBED are combined with stereographic analysis to construct a three-dimensional microstructure deformation map of the surface of a perfectly plastic microindentation on macroscopically brittle aluminum nitride.The bright field image in Figure 1 shows a lg Vickers microindentation contained within a single AlN grain far from any boundaries. High densities of dislocations are evident, particularly near facet edges but are not individually resolvable. The prominent bend contours also indicate the severity of plastic deformation. Figure 2 is a selected area diffraction pattern covering the entire indentation area.

Download Full-text

Gold labeling of teichoic acid on adjacent surfaces of staphylococcus aureus

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100160443 ◽

1990 ◽

Vol 48 (3) ◽

pp. 578-579

Author(s):

Margaret Hukee

Keyword(s):

Staphylococcus Aureus ◽

Teichoic Acid ◽

Protein Labeling ◽

Minimal Amount ◽

Section Thickness ◽

Double Labeling ◽

Parallel Surfaces ◽

Supporting Membrane

Gold labeling of two antigens (double labeling) is often done on two section surfaces separated by section thickness. Whether labeling is done on both sides of the same section or on two parallel surfaces separated by section thickness (PSSST), comparable results are dependent on an equal number of epitopes being exposed at each surface. We propose a method to study protein labeling within the same field of proteins, by examining two directly adjacent surfaces that were split during sectioning. The number of labeling sites on adjacent surfaces (AS) were compared to sites on PSSST surfaces in individual bacteria.Since each bacteria needed to be recognizable in all three section surfaces, one-hole grids were used for labeling. One-hole grids require a supporting membrane and excessive handling during labeling often ruptures the membrane. To minimize handling, a labeling chamber was designed that is inexpensive, disposable, minimizes contamination, and uses a minimal amount of solution.

Download Full-text