Scaling and Self-Similarity of One-Dimensional Suspended Sediment Transport Equations

Author(s):  
K. J. Carr ◽  
A. Ercan ◽  
M. L. Kavvas
1988 ◽  
Vol 20 (6-7) ◽  
pp. 103-112 ◽  
Author(s):  
Tohru Futawatari ◽  
Tetsuya Kusuda ◽  
Kenichi Koga ◽  
Hiroyuki Araki ◽  
Teruyuki Umita ◽  
...  

A one dimensional simulation model of suspended sediment transport in a tidal river was developed with erosion, deposition, and thickening processes of sediments, and inflow from tributaries. This model uses the explicit leapfrog method and its lower end boundary of the river is extended into the sea to close the boundary for calculation. Laboratory experiments were performed to determine erosional and depositional rates of sediments and to study the sediment thickening process in the river under various concentrations of chlorinity and suspended solids. Numerical simulation results with the parameter values obtained experimentally did not show good agreement with observed data. Modifying the parameter values according to physical phenomena was necessary to obtain good agreement in between. After the modification, computation results during a fortnightly cycle explain satisfactorily the sediment transport phenomena in this river.


Author(s):  
Wenwen Shen ◽  
Terry Griffiths ◽  
Mengmeng Xu ◽  
Jeremy Leggoe

For well over a decade it has been widely recognised that existing models and tools for subsea pipeline stability design fail to account for the fact that seabed soils tend to become mobile well before the onset of pipeline instability. Despite ample evidence obtained from both laboratory and field observations that sediment mobility has a key role to play in understanding pipeline/soil interaction, no models have been presented previously which account for the tripartite interaction between the fluid and the pipe, the fluid and the soil, and the pipe and the soil. There are numerous well developed and widely used theories available to model pipe-fluid and pipe-soil interactions. A challenge lies in the way to develop a satisfactory fluid-soil interaction algorithm that has the potential for broad implementation under both ambient and extreme sea conditions due to the complexity of flow in the vicinity of a seabed pipeline or cable. A widely used relationship by Shields [1] links the bedload and suspended sediment transport to the seabed shear stresses. This paper presents details of computational fluid dynamics (CFD) research which has been undertaken to investigate the variation of seabed shear stresses around subsea pipelines as a parametric function of pipeline spanning/embedment, trench configuration and wave/current properties using the commercial RANS-based software ANSYS Fluent. The modelling work has been undertaken for a wide range of seabed geometries, including cases in 3D to evaluate the effects of finite span length, span depth and flow attack angle on shear stresses. These seabed shear stresses have been analysed and used as the basis for predicting sediment transport within the Pipe-Soil-Fluid (PSF) Interaction Model [2] in determining the suspended sediment concentration and the advection velocity in the vicinity of pipelines. The model has significant potential to be of use to operators who struggle with conventional stabilisation techniques for the pipelines, such as those which cross Australia’s North West Shelf, where shallow water depths, highly variable calcareous soils and extreme metocean conditions driven by frequent tropical cyclones result in the requirement for expensive and logistically challenging secondary stabilisation measures.


Geomorphology ◽  
2009 ◽  
Vol 109 (3-4) ◽  
pp. 210-221 ◽  
Author(s):  
J.A. López-Tarazón ◽  
R.J. Batalla ◽  
D. Vericat ◽  
T. Francke

Sign in / Sign up

Export Citation Format

Share Document