Experimental and Numerical Study of Blast-Structure Interaction

Author(s):  
Benjamin J. Katko ◽  
Rodrigo Chavez ◽  
Heng Liu ◽  
Barry Lawlor ◽  
Claire McGuire ◽  
...  
Bauingenieur ◽  
2020 ◽  
Vol 95 (11) ◽  
pp. S 2-S 11
Author(s):  
H. D. B. Aji ◽  
M. B. Basnet ◽  
Frank Wuttke

Abstract The identification of the dynamic behaviour of a structure is one of the crucial steps in the design of the dynamic resistance of the structure. The dynamic behaviour is represented by the natural frequencies and damping which are subsequently used along with the considered dynamic actions in the design process. In regard of integral bridge concept, one of the consequences of the omission of joints and bearings is the substantial soil-structure interaction which in turn increases the sensitivity of the dynamic behaviour of the bridges to the surrounding soil characteristic. In this article, we extended our hybrid BEM-FEM steady-state dynamic numerical tool to the 3D regime, developed by utilizing an in-house BEM and the commercial FEM software ABAQUS and use it to analyse the dynamic interaction between the bridge and the underlying soil as well as the backfill. The numerical results from four typical integral bridges show that underlying soil characteristic has great effect on the resonant frequencies and the damping. The backfill material properties tend to have less significant role due to the abutment wingwalls dominating the force transfer between the soil and the superstructure. The results also show that the degree of influence of the soil-structure interaction on the coupled system is affected by the type of load pattern in addition to the flexural stiffness of the superstructure.


2021 ◽  
Vol 31 (5) ◽  
pp. 1373-1395
Author(s):  
Iman Mazinani ◽  
Mohammad Mohsen Sarafraz ◽  
Zubaidah Ismail ◽  
Ahmad Mustafa Hashim ◽  
Mohammad Reza Safaei ◽  
...  

Purpose Two disastrous Tsunamis, one on the west coast of Sumatra Island, Indonesia, in 2004 and another in North East Japan in 2011, had seriously destroyed a large number of bridges. Thus, experimental tests in a wave flume and a fluid structure interaction (FSI) analysis were constructed to gain insight into tsunami bore force on coastal bridges. Design/methodology/approach Various wave heights and shallow water were used in the experiments and computational process. A 1:40 scaled concrete bridge model was placed in mild beach profile similar to a 24 × 1.5 × 2 m wave flume for the experimental investigation. An Arbitrary Lagrange Euler formulation for the propagation of tsunami solitary and bore waves by an FSI package of LS-DYNA on high-performance computing system was used to evaluate the experimental results. Findings The excellent agreement between experiments and computational simulation is shown in results. The results showed that the fully coupled FSI models could capture the tsunami wave force accurately for all ranges of wave heights and shallow depths. The effects of the overturning moment, horizontal, uplift and impact forces on a pier and deck of the bridge were evaluated in this research. Originality/value Photos and videos captured during the Indian Ocean tsunami in 2004 and the 2011 Japan tsunami showed solitary tsunami waves breaking offshore, along with an extremely turbulent tsunami-induced bore propagating toward shore with significantly higher velocity. Consequently, the outcomes of this current experimental and numerical study are highly relevant to the evaluation of tsunami bore forces on the coastal, over sea or river bridges. These experiments assessed tsunami wave forces on deck pier showing the complete response of the coastal bridge over water.


2018 ◽  
Vol 435 ◽  
pp. 23-35 ◽  
Author(s):  
Shigeki Kaneko ◽  
Giwon Hong ◽  
Naoto Mitsume ◽  
Tomonori Yamada ◽  
Shinobu Yoshimura

2017 ◽  
Vol 2017 ◽  
pp. 1-20 ◽  
Author(s):  
Yulin Deng ◽  
Qingkang Guo ◽  
Lueqin Xu

This paper presents an experimental program performed to study the effect of fluid-structure interaction on the modal dynamic response of water-surrounded slender bridge pier with pile foundation. A reduced scale slender bridge pier specimen is built and tested through forced vibration method. The vibration periods of the first four lateral modes, including the first two modes along x-axis and the first two modes along y-axis, are measured based on the specimen submerged by 16 levels of water and designated with 4 levels of tip mass. Three-dimensional (3D) finite-element models are established for the tested water-pier system and analyzed under various combined cases of water level and tip mass. Percentage increases of vibration periods with respect to dry vibration periods (i.e., vibration periods of the specimen without water) are determined as a function of water level and tip mass to evaluate the effect of fluid-structure interaction. The numerical results are successfully validated against the recorded test data. Based on the validated models, the modal hydrodynamic pressures are calculated to characterize the 3D distribution of hydrodynamic loads on the pier systems. The research provides a better illumination into the effect of fluid-structure interaction on the modal dynamic response of deepwater bridges.


2004 ◽  
Vol 13 (8) ◽  
pp. 811-830 ◽  
Author(s):  
Jérome Giordano ◽  
Yves Burtschell ◽  
Marc Medale ◽  
Pierre Perrier

2012 ◽  
Vol 18 (6) ◽  
pp. 890-898 ◽  
Author(s):  
Sadegh Naserkhaki ◽  
Hassan Pourmohammad

This paper presents a numerical study of soil-structure interaction (SSI) and structure-soil-structure interaction (SSSI) effects on response of twin buildings during earthquake excitations. The buildings are modeled as shear buildings and the soil is simulated by a discrete model representing a visco-elastic half-space subjected to earthquake acceleration. Equation of motion of twin buildings with different conditions, fixed based (FB), SSI and SSSI, are developed via an analytical procedure and solved numerically. Buildings responses are evaluated for aforementioned three conditions considering various soil types and compared together. One must say that soil causes change in distribution of responses throughout the buildings while ignoring soil interaction may lead to detrimental effects on buildings. Anyway, interaction between twin buildings with SSSI condition slightly mitigates soil unfavorable effects compare to one building with SSI condition. In addition, it is found that influence of soil is very significant for soft to stiff soils whereas negligible for hard soils.


Author(s):  
S. Shahsavari ◽  
M. B. Shafii ◽  
M. H. Saidi

Thermopneumatic micropump is one type of positive displacement micropump, which has many applications due to its relatively large stroke volume, low working voltage, and simple fabrication in microscale. In this paper, a numerical study of heat transfer and fluid flow in a valveless thermopneumatically driven micropump is presented. For rectifying the bidirectional flow, a nozzle and a diffuser are used as the inlet and outlet channels of the chamber. Since the fluid flow is induced by the motion of a diaphragm, the numerical simulation includes fluid structure interaction, which requires applying a dynamic mesh. The domain of solution is divided into two sections; the actuator unit, which contains the secondary fluid, and the main chamber through which the working fluid is passing. The temperature distribution, the pressure variations, and the center deflection of the diaphragm are obtained. In order to validate the model, the numerical results are compared with some experimental data, which shows fair consistency. According to the results of the three dimensional simulation, the rectification efficiency for the nozzle and diffuser channels depends on the frequency.


Sign in / Sign up

Export Citation Format

Share Document