Characterization of an x-ray framing camera utilizing a charge coupled device or film as recording media

1998 ◽  
Vol 69 (12) ◽  
pp. 4054-4060 ◽  
Author(s):  
L. M. Logory ◽  
D. R. Farley ◽  
A. D. Conder ◽  
E. A. Belli ◽  
P. M. Bell ◽  
...  
2003 ◽  
Vol 18 (10) ◽  
pp. 2522-2527 ◽  
Author(s):  
E. D. Specht ◽  
A. Rar ◽  
G. M. Pharr ◽  
E. P. George ◽  
P. Zschack ◽  
...  

A technique based on synchrotron radiation was developed that allows for rapid structural and chemical characterization of ternary alloys over a wide range of composition. The technique was applied to isothermal sections of the Cr–Fe–Ni system grown on Al2O3(0001) sapphire substrates by sequential deposition of layers of graded.thickness followed by annealing to interdiffuse the elements. A film spanning the Cr–Fe–Ni ternary system was measured in 4 h at a resolution of 2 at.% by rastering the sample under a focused beam of synchrotron radiation while simultaneously measuring the diffraction pattern with a charge-coupled device detector to determine crystallographic phases, texture, and lattice parameters and also measuring the x-ray fluorescence with an energy-dispersive detector to determine elemental composition. Maps of phase composition and lattice parameter as a function of composition for several annealing treatments were found to be consistent with equilibrium values. The technique will be useful in combinatorial materials design.


2000 ◽  
Vol 71 (12) ◽  
pp. 4449 ◽  
Author(s):  
K. Sato ◽  
Y. Hasegawa ◽  
K. Kondo ◽  
K. Miyazaki ◽  
T. Matsushita ◽  
...  

2006 ◽  
Vol 39 (5) ◽  
pp. 767-770
Author(s):  
Hiroshi Abe ◽  
Hiroyuki Saitoh ◽  
Hironori Nakao ◽  
Kazuki Ito ◽  
Ken-ichi Ohshima

A charge-coupled device (CCD) X-ray detector for inelastic X-ray scattering was installed at beamline BL-4C of the Photon Factory at the High Energy Accelerator Research Organization in Japan. A wavelength-dispersive X-ray spectrometer was mounted on a six-circle diffractometer. Energy spectra were obtained by the CCD X-ray detector and a curved highly oriented pyrolytic graphite analyser. By the combination of energy spectroscopy and diffraction, simultaneous real-time data acquisition of both the momentum and the energy transfer was performed.


1999 ◽  
Vol 38 (1) ◽  
pp. 29 ◽  
Author(s):  
Luca Poletto ◽  
Alessio Boscolo ◽  
Giuseppe Tondello

1994 ◽  
Vol 38 ◽  
pp. 503-510 ◽  
Author(s):  
S. Hanna ◽  
A.H. Windle

Abstract We describe a new X-ray fibre diffractometer, consisting of a commercial X-ray sensitive video camera coupled to a conventional 3-circle goniometer in place of a more traditional single-point detector. The active element of the video camera is a charge-coupled device (CCD). Diffraction images, obtained at various goniometer settings, are transformed into reciprocal space, and combined to give a complete section through the origin and parallel to the symmetry axis of cyiindrically averaged reciprocal space. A greater density of measurements is needed in the vicinity of the reciprocal fibre axis in order to avoid information loss due to the curvature of the Ewald sphere. The pros and cons of using CCD's as X-ray detectors are discussed and sample results from polymer fibres are shown.


2008 ◽  
Vol 79 (10) ◽  
pp. 103302 ◽  
Author(s):  
Wilfred Fullagar ◽  
Jens Uhlig ◽  
Monika Walczak ◽  
Sophie Canton ◽  
Villy Sundström

2002 ◽  
Vol 38 (4) ◽  
pp. 1693-1697 ◽  
Author(s):  
E.E. Fullerton ◽  
O. Hellwig ◽  
Y. Ikeda ◽  
B. Lengsfield ◽  
K. Takano ◽  
...  

1985 ◽  
Vol 56 (5) ◽  
pp. 837-839 ◽  
Author(s):  
K. Marsh ◽  
C. Joshi ◽  
J. Janesick ◽  
S. Collins
Keyword(s):  
X Ray ◽  

Sign in / Sign up

Export Citation Format

Share Document