Preliminary study of the influence of different modelling choices and materials properties uncertainties on the seismic assessment of an existing RC school building

Author(s):  
Gianluca Maracchini ◽  
Francesco Clementi ◽  
Enrico Quagliarini ◽  
Stefano Lenci ◽  
Francesco Monni
Author(s):  
Enzo Martinelli ◽  
Ciro Faella ◽  
Emidio Nigro ◽  
Carmine Lima

<p>This paper summarizes the main features of the seismic retrofitting project of a school building located in Montella (AV), Italy. Specifically, it describes the as-built status in terms of structural organization, member detailing, and existing materials properties. Then, it outlines the main assumptions and results obtained from seismic analysis, of both as-built and retrofitted structure. Comments about the construction stage are also reported by describing the main operations put in place with the aim to realize the shear wall system, which is the main retrofitting intervention, and some local strengthening measures consisting in steel plating and jacketing of some underdesigned RC members. Some emphasis is placed on the realization of micro-piles and extra foundations of the aforementioned shear walls. Besides its specific interest, the reported project may be intended as representative of a wide class of seismic assessment and retrofitting projects that have been realized in Italy in the last decade.</p>


Author(s):  
Gloria Terenzi ◽  
Caterina Bazzani ◽  
Iacopo Costoli ◽  
Stefano Sorace ◽  
Paolo Spinelli

2018 ◽  
Vol 16 (11) ◽  
pp. 1573-1589 ◽  
Author(s):  
Hugo Rodrigues ◽  
André Furtado ◽  
Nelson Vila-Pouca ◽  
Humberto Varum ◽  
André R. Barbosa

Author(s):  
John H.L. Watson ◽  
John L. Swedo ◽  
R.W. Talley

A preliminary study of human mammary carcinoma on the ultrastructural level is reported for a metastatic, subcutaneous nodule, obtained as a surgical biopsy. The patient's tumor had responded favorably to a series of hormonal therapies, including androgens, estrogens, progestins, and corticoids for recurring nodules over eight years. The pertinent nodule was removed from the region of the gluteal maximus, two weeks following stilbestrol therapy. It was about 1.5 cms in diameter, and was located within the dermis. Pieces from it were fixed immediately in cold fixatives: phosphate buffered osmium tetroxide, glutaraldehyde, and paraformaldehyde. Embedment in each case was in Vestopal W. Contrasting was done with combinations of uranyl acetate and lead hydroxide.


Author(s):  
H.D. Geissinger ◽  
C.K. McDonald-Taylor

A new strain of mice, which had arisen by mutation from a dystrophic mouse colony was designated ‘mdx’, because the genetic defect, which manifests itself in brief periods of muscle destruction followed by episodes of muscle regeneration appears to be X-linked. Further studies of histopathological changes in muscle from ‘mdx’ mice at the light microscopic or electron microscopic levels have been published, but only one preliminary study has been on the tibialis anterior (TA) of ‘mdx’ mice less than four weeks old. Lesions in the ‘mdx’ mice vary between different muscles, and centronucleation of fibers in all muscles studied so far appears to be especially prominent in older mice. Lesions in young ‘mdx’ mice have not been studied extensively, and the results appear to be at variance with one another. The degenerative and regenerative aspects of the lesions in the TA of 23 to 26-day-old ‘mdx’ mice appear to vary quantitatively.


Author(s):  
L.E. Murr ◽  
A.B. Draper

The industrial characterization of the machinability of metals and alloys has always been a very arbitrarily defined property, subject to the selection of various reference or test materials; and the adoption of rather naive and misleading interpretations and standards. However, it seems reasonable to assume that with the present state of knowledge of materials properties, and the current theories of solid state physics, more basic guidelines for machinability characterization might be established on the basis of the residual machined microstructures. This approach was originally pursued by Draper; and our presentation here will simply reflect an exposition and extension of this research.The technique consists initially in the production of machined chips of a desired test material on a horizontal milling machine with the workpiece (specimen) mounted on a rotary table vice. A single cut of a specified depth is taken from the workpiece (0.25 in. wide) each at a new tool location.


Author(s):  
J P Cassella ◽  
V Salih ◽  
T R Graham

Left ventricular assist systems are being developed for eventual long term or permanent implantation as an alternative to heart transplantation in patients unsuitable for or denied the transplant option. Evaluation of the effects of these devices upon normal physiology is required. A preliminary study was conducted to evaluate the morphology of aortic tissue from calves implanted with a pneumatic Left Ventricular Assist device-LVAD. Two 3 month old heifer calves (calf 1 and calf 2) were electively explanted after 128 days and 47 days respectively. Descending thoracic aortic tissue from both animals was removed immediately post mortem and placed into karnovsky’s fixative. The tissue was subsequently processed for transmission electron microscopy (TEM). Some aortic tissue was fixed in neutral buffered formalin and processed for routine light microscopy.


2021 ◽  
Author(s):  
Hicham Zaroual ◽  
El Mestafa El Hadrami ◽  
Romdhane Karoui

This study examines the feasibility of using front face fluorescence spectroscopy (FFFS) to authenticate 41 virgin olive oil (VOO) samples collected from 5 regions in Morocco during 2 consecutive crop seasons.


Sign in / Sign up

Export Citation Format

Share Document