Design of covers with capillary barrier effect for protection of mine tailings

2019 ◽  
Author(s):  
Nacer E. El Kadri E. ◽  
Abdelhakim Chillali
Minerals ◽  
2020 ◽  
Vol 10 (8) ◽  
pp. 704 ◽  
Author(s):  
Alex Proteau ◽  
Marie Guittonny ◽  
Bruno Bussière ◽  
Abdelkabir Maqsoud

Acid mine drainage is an important environmental risk linked to the surface storage of reactive mine tailings. To manage this problem, a cover with a capillary barrier effect (CCBE) can be used. This oxygen barrier cover relies on maintaining a fine-grained material layer (moisture-retaining layer, MRL) with a high degree of saturation. CCBEs can be colonized by surrounding plants. Plant roots pump water and could impact CCBE’s performance. This performance is predicted with unsaturated water flow numerical models in which vegetation parameters can be included. Vegetation parameters may be specific in a CCBE environment. Therefore, analyzing and quantifying the vegetation that colonizes this type of cover is necessary. Plant colonization was investigated through cover and density surveys on 12 transects on a 17-year-old CCBE in the mixed forest of Quebec, Canada. Then, aboveground vegetation and root colonization intensity at three depths in the MRL were characterized on 25 plots of five dominant vegetation types (Salix, Populus, Alnus, Picea sp., and herbaceous species). The mean root length density under plots dominated by Salix sp. was higher than in the other plots. Root colonization of the MRL was concentrated in the first 10 cm and occurred under all woody and herbaceous species as well. This work quantitatively describes, for the first time, the vegetation colonizing a CCBE both at the above- and belowground levels. These data will be useful to better predict the long-term performance of this engineered reclamation cover.


2017 ◽  
Author(s):  
Rico Hübner ◽  
Thomas Günther ◽  
Katja Heller ◽  
Ursula Noell ◽  
Arno Kleber

Abstract. Identifying principles of water movement in the shallow subsurface is crucial for adequate process-based hydrological models. Hillslopes are the essential interface for water movement in catchments. The shallow subsurface on slopes typically consist of different layers with varying characteristics. The aim of this study was to draw conclusion about the infiltration behaviour, to identify water flow pathways and derive general validity about the water movement on a hillslope with periglacial slope deposits (cover beds), where the layers differ in their sedimentological and hydrological properties. Especially the described varying influence of the basal layer (LB) as impeding layer on the one hand and as a remarkable pathway for rapid subsurface stormflow on the other. We used a time lapse 3D ERT approach combined with punctual hydrometric data to trace the spreading and the progression of an irrigation plume in layered slope deposits during two irrigation experiments. This multi-technical approach enables us to connect the high spatial resolution of the 3D ERT with the high temporal resolution of the hydrometric devices. Infiltration through the uppermost layer was dominated by preferential flow, whereas the water flow in the deeper layers was mainly matrix flow. Subsurface stormflow due to impeding characteristic of the underlying layer occurs in form of "organic layer interflow" and at the interface to the first basal layer (LB1). However, the main driving factor for subsurface stormflow is the formation of a capillary barrier at the interface to the second basal layer (LB2). The capillary barrier prevents water from entering the deeper layer under unsaturated conditions and diverts the seepage water according to the slope inclination. With higher saturation the capillary barrier breaks down and water reaches the highly conductive deeper layer. This highlights the importance of the capillary barrier effect for the prevention or activation of different flow pathways under variable hydrological conditions.


1988 ◽  
Vol 19 (5) ◽  
pp. 281-292 ◽  
Author(s):  
Anders Rasmuson ◽  
Jan-Christer Eriksson

The capillary barrier concept, using fine and coarse soil layers to reduce water infiltration into piles of hazardous wastes, is investigated theoretically. A detailed account of the hydrological and physico-chemical basis for the phenomenon is given. It is established that the capillary barrier will, in practice, only function if the fine layer remains somewhat unsaturated, i.e. the upper menisci exist and no ponding over the fine layer occurs. Accordingly, water reaching the fine layer must be transported laterally within this layer. The pressure conditions are dependent on the length of the interface, the slope of the interface, the thickness of the fine layer, the type of soil in the fine layer, the water influx at the surface, and the total volume of water infiltrated during an infiltration event. A simple estimate shows that the capillary barrier concept is feasible only for small heaps with steep interfacial slopes.


2016 ◽  
Vol 21 (1) ◽  
pp. 1-5 ◽  
Author(s):  
Jeong-Hwan Lee ◽  
Hyun-Jin Cho ◽  
Jae-Yeol Cheong ◽  
Haeryong Jung ◽  
Jeong Hyoun Yoon

Géotechnique ◽  
2021 ◽  
pp. 1-25
Author(s):  
Liang-Tong Zhan ◽  
Guang-Yao Li ◽  
Bate Bate ◽  
Yun-Min Chen

Capillary barrier effect (CBE) is employed in a large number of geotechnical applications to decrease deep percolation or increase slope stability. However, the micro-scale behaviour of CBE is rarely investigated, and thus hampers the scientific design of capillary barrier systems. This study uses microfluidics to explore the micro-scale behaviour of CBE. Capillarity-driven water flow processes from fine to coarse porous media with different pore topologies and sizes were performed and analysed. The experimental results demonstrate that the basic physics of CBE is the preferential water movement into the fine porous media due to the larger capillarity. The effects of CBE on water flow processes can be identified as delaying the occurrence of breakthrough into the coarse porous media and increasing the water storage of the fine porous media. The CBE can impede the increase of the normalized length and decrease the normalized width of the water front, suggesting that the two normalized parameters are potential indicators to assess the performance of CBE at micro scale. CBE can be formed in square and honeycomb networks with the ratio of coarse to fine pore throat width larger than 2.0 when gravity is neglected, and its performance can be affected by pore topology and size.


2011 ◽  
Vol 48 (7) ◽  
pp. 996-1009 ◽  
Author(s):  
Amir M. Abdolahzadeh ◽  
Benoit Lacroix Vachon ◽  
Alexandre R. Cabral

The goal of an instrumented experimental plot constructed on the Saint-Tite-des-Caps landfill site was to evaluate the field behaviour and performance of a cover with capillary barrier effect (CCBE) to control water percolation. The CCBE consists of a layer of deinking by-products (DBP) on top of a layer of sand overlying a gravel layer. The DBP layer acts as a seepage control layer to control the rate of seepage that can reach the top of the capillary barrier. Analysis of the field data shows that the seepage control layer consisting of DBP remained nearly saturated and controlled percolation to the desired level. In addition, for the first year of monitoring, the diversion length determined from field data was very similar to that estimated by the analytical solution that was used for the design of the experimental plot. Afterwards, the diversion length increased due to a decrease in the rate of seepage caused by settlement of the seepage control layer, which caused a decrease in its saturated hydraulic conductivity. At all times, the flows that reached the gravel layer at the toe of the experimental CCBE were, for all practical purposes, lower than the maximum seepage rates required by the most restrictive landfill regulations.


2004 ◽  
Vol 41 (4) ◽  
pp. 629-643 ◽  
Author(s):  
Hong Yang ◽  
H Rahardjo ◽  
E C Leong ◽  
D G Fredlund

The capillary barrier effect was investigated by conducting infiltration tests on three soil columns of fine sand over medium sand, medium sand over gravelly sand, and fine sand over gravelly sand. The barrier effect was verified in the underlying layer of coarser material, and the water-entry values of the coarser layers were confirmed to be nearly equal to the residual matric suctions of the soils. The coarser layer of gravelly sand, which had a lower water-entry value, was more effective in forming a barrier than the coarser layer of medium sand, which had a higher water-entry value. When the capillary barrier was comprised of a coarser layer of gravelly sand, there was more water stored in the finer layer at the end of the drying stage than when the capillary barrier was comprised of a coarser layer of medium sand. Non-equilibrium static conditions of pore-water pressure profiles were observed in the three soil columns, and a generalized ultimate pore-water pressure profile of a capillary barrier system was proposed. In addition, the final volumetric water contents versus matric suctions of the soils as measured from the soil columns were reasonably consistent with the soil-water characteristic curves (SWCCs) of the soils, suggesting that the drying SWCC of a soil could also be obtained from the drying process in a soil column (or a capillary open tube). The drying SWCC could be established from measurements in the soil column up to a height corresponding to two times the residual matric suction head of the soil.Key words: capillary barrier, soil column, soil-water characteristic curve, pore-water pressure, water content, matric suction.


Sign in / Sign up

Export Citation Format

Share Document