Response to superphosphate by rice in an annual rice-cropping system in southern New South Wales

1986 ◽  
Vol 26 (6) ◽  
pp. 691 ◽  
Author(s):  
DP Heenan ◽  
GD Batten
Keyword(s):  
Grain Yield ◽  
Field Experiments ◽  
New South ◽  
New South Wales ◽  
Cropping System ◽  
P Deficiency ◽  
Soil P ◽  
South Wales ◽  
Low Phosphorus ◽  
Varietal Tolerance

In New South Wales, symptoms typical of phosphorus (P) deficiency have occurred in rice where the crop has been grown annually for 9 years without phosphorus fertiliser. Field experiments were conducted to determine the requirements for superphosphate, the residual value of applied P, and rice varietal tolerance to low soil P. As the rate of application of superphosphate increased from 0 to 40 kg/ha P, rice growth and grain yield increased significantly up to 20 kg/ha P. Applications of 20 and 40 kg/ha P (but not 10 kg/ha P) had significant residual values for rice in the second year. The variety Pelde was more sensitive to low phosphorus during early vegetative growth than either M7 or Calrose. The 3 varieties showed similar responses in grain yield to superphosphate.

Effect of sowing rate on grain yield, kernel weight, and grain protein percentage of barley (Hordeum vulgare L.) in northern New South Wales

1992 ◽  
Vol 32 (4) ◽  
pp. 465 ◽  
Author(s):  
AD Doyle ◽  
RW Kingston
Keyword(s):  
Hordeum Vulgare ◽  
Grain Yield ◽  
Field Experiments ◽  
New South ◽  
New South Wales ◽  
Kernel Weight ◽  
Grain Protein ◽  
Hordeum Vulgare L ◽  
Protein Percentage ◽  
South Wales

The effect of sowing rate (10-110 kg/ha) on the grain yield of barley (Hordeum vulgare L.) was determined from a total of 20 field experiments conducted in northern New South Wales from 1983 to 1986. Effects of sowing rate on kernel weight and grain protein percentage were also determined from 12 experiments conducted in 1985 and 1986. Two barley varieties were tested each year. In all years fallow plus winter rainfall was equal to or greater than average. Grain yield increased with higher sowing rates in most experiments, with the response curve reaching a plateau above 60-70 kg/ha. For 13 of the 40 variety x year combinations, grain yield fell at the highest sowing rates. Only in an experiment where lodging increased substantially with higher sowing rates was there a reduction in yield at a sowing rate of 60 kg/ha. The average sowing rate for which 5 kg grain was produced per kg of seed sown was 63 kg/ha. Grain protein percentage usually fell, and kernel weight invariably fell, with increasing sowing rate. Increasing sowing rates from the normal commercial rate of 35 kg/ha to a rate of 60 kg/ha typically increased grain yields by 100-400 kg/ha, decreased kernel weight by 0.4-2.0 mg, and decreased grain protein by up to 0.5 percentage points. In no case was the grain weight reduced to below malting specifications. It was concluded that sowing rates for barley in northern New South Wales should be increased to about 60 kg/ha.

A comparison of tri-allate formulations for control of wild oats in wheat in northern New South Wales

1989 ◽  
Vol 29 (2) ◽  
pp. 215
Author(s):  
RJ Martin ◽  
WL Felton ◽  
AJ Somervaille
Keyword(s):  
Grain Yield ◽  
Field Experiments ◽  
Crop Residues ◽  
New South ◽  
New South Wales ◽  
Liquid Formulation ◽  
Wheat Grain ◽  
Wild Oats ◽  
South Wales ◽  
Glasshouse Experiment

Three field trials and a glasshouse experiment were carried out in northern New South Wales to determine the effects of reduced mechanical incorporation and the presence of crop residues on the efficacy of liquid and granular formulations of triallate [S-(2,3,3-trichioroallyl) diisopropylthiocarbamate] for control of wild oats (Avena fatua and A. sterilis ssp. ludoviciana) in wheat. In field experiments, fallow management practices with surface crop residues ranging from nil to complete retention from the previous wheat crop, did not affect the performance of tri-allate (incorporated by sowing) in terms of control of wild oats and wheat grain yield response. Application of a granular formulation resulted in lower than expected wheat grain yields in 2 of the field experiments and phytotoxicity to the crop was suspected as the reason. Although soil incorporation improved the performance of tri-allate at the recommended rate of 0.8 kg/ha, satisfactory control of wild oats and profitable increases in wheat grain yield were obtained with tri-allate at 1.2 kg/ha when incorporated by sowing into seedbeds containing up to 2 t/ha of crop residue. We conclude that tri-allate as the liquid formulation at 1.2 kg/ha gives economic control of wild oats in no-tillage and stubble-mulched seedbeds when incorporated by sowing provided that the weed-free wheat grain yield potential is not less than 1.5 t/ha. Results from the glasshouse experiment, farmer experience and published literature support the practice of incorporating tri-allate into dry soil with subsequent activation by sowing rain. The potential use of the granular formulation is limited by the greater risk of crop damage compared with the liquid formulation.

Effect of time sowing and cultivar on the development and grain yield of irrigated wheat in the Macquarie Valley, New South Wales

1992 ◽  
Vol 32 (3) ◽  
pp. 345 ◽  
Author(s):  
JL Cooper
Keyword(s):  
Grain Yield ◽  
Field Experiments ◽  
New South ◽  
New South Wales ◽  
Moisture Stress ◽  
Frost Damage ◽  
Yield Reduction ◽  
Detectable Effect ◽  
South Wales ◽  
Wide Range

Field experiments over 2 seasons in the Macquarie Valley of central New South Wales compared yields under irrigation of 5 wheat varieties with a wide range of maturities sown from 8 April to 27 August.Early maturity wheats (Yecora and Avocet) sown prior to 6 May suffered frost damage, while the winter wheats (WW33G and Burgas) sown after 29 July were not fully vernalised and most tillers failed to produce heads. There was a curvilinear relation between time of sowing and grain yield. Excluding the treatments which suffered frost damage, the earliest time of sowing (8 April) produced the highest yield, with a 6.4% yield reduction between 8 April and 8 May. The yield reduction increased with later sowing date: 13.3, 19.3, and 26.5% during May, June, and July. Anthesis in mid September produced the highest yields for all varieties. Treatments which flowered earlier than mid September suffered frost damage. For each day later than 15 September that anthesis occurred, the mean yield fell by 1.3% or about 68 kg/ha.day. Date of anthesis had no detectable effect on the rate of individual grain growth (1.3 mg/grain.day), but the later anthesis occurred, the shorter the duration of grain development and the lower the final grain weight. Rising temperatures, not moisture stress, seems to be the factor causing the decline in yield with late sowing. This experiment was irrigated to eliminate moisture stress but the decline in yield was similar to that reported for dryland crops.

Phosphorus fertiliser placement for lupins in southern New South Wales

2003 ◽  
Vol 43 (1) ◽  
pp. 79 ◽  
Author(s):  
B. J. Scott ◽  
D. J. Carpenter ◽  
B. D. Braysher ◽  
B. R. Cullis ◽  
C. M. Evans
Keyword(s):  
Grain Yield ◽  
Field Experiments ◽  
New South ◽  
New South Wales ◽  
Row Spacing ◽  
Response Curves ◽  
Double Row ◽  
Deep Placement ◽  
South Wales ◽  
P Application

Research in Western Australia and South Australia indicated that fertiliser phosphorus (P) banded below the seed of narrow leaf lupin (Lupinus angustifolius L.) at sowing was a more effective method of applying P�fertiliser than the usual placement of P with the seed. This technology has not been investigated in southern New South Wales where lupins have been known to be unresponsive to fertiliser P.We conducted 4 field experiments to examine the effect on lupin yield of applying 6 rates of P (0, 5, 10, 15, 20 and 40 kg/ha) either by placement with or below the seed. To further test responsiveness to P, an additional set of treatments was used; applying P at 40 kg/ha before sowing and then placing additional P below the seed at the 6�rates of application. The grain yield of lupin was increased by P application at all sites, despite the medium to high P�status of 3 of the 4 sites used in these experiments. However, the technique of banding P fertiliser below the seed depth rather than placing it in direct seed contact had only a small advantage in grain yield responsiveness to applied fertiliser P (P = 0.09). Fitted response curves indicated that when P was applied at 15 kg/ha, grain yield increased by 60 kg/ha at one site and 30 kg/ha at the other 3 sites, if P was deep-placed rather than applied in seed contact. This advantage of deep placement of P fertiliser was much smaller than has been reported in Western Australia.Placement of P below the seed of lupin when sown on the red earth and red-brown earth soils of southern New South Wales slightly enhanced the availability of fertiliser P. This applied even when sowing was quite shallow (2–3�cm), provided recommended rates of P fertiliser were used at conventional row spacing (17 cm). Separation of seed and fertiliser to avoid reduced germination may be an advantage when using double row spacing and higher P�application rates.

Agronomic studies on irrigated soybean in southern New South Wales. II. Broadening options for sowing date

2011 ◽  
Vol 62 (12) ◽  
pp. 1067 ◽  
Author(s):  
L. G. Gaynor ◽  
R. J. Lawn ◽  
A. T. James
Keyword(s):  
Field Experiments ◽  
New South ◽  
New South Wales ◽  
Sowing Date ◽  
Plant Population ◽  
Yield Potential ◽  
Higher Plant ◽  
Winter Cereal ◽  
Double Cropping ◽  
South Wales

The response of irrigated soybean to sowing date and to plant population was evaluated in field experiments over three years at Leeton, in the Murrumbidgee Irrigation Area (MIA) in southern New South Wales. The aim was to explore the options for later sowings to improve the flexibility for growing soybean in double-cropping rotations with a winter cereal. The experiments were grown on 1.83-m-wide raised soil beds, with 2, 4, or 6 rows per bed (years 1 and 2) or 2 rows per bed only (year 3). Plant population, which was manipulated by changing either the number of rows per bed (years 1 and 2) or the within-row plant spacing (year 3), ranged from 15 to 60 plants/m2 depending on the experiment. Two sowings dates, late November and late December, were compared in years 1 and 3, while in year 2, sowings in early and late January were also included. Three genotypes (early, medium, and late maturity) were grown in years 1 and 2, and four medium-maturing genotypes were grown in year 3. In general, machine-harvested seed yields were highest in the November sowings, and declined as sowing was delayed. Physiological analyses suggested two underlying causes for the yield decline as sowing date was delayed. First and most importantly, the later sown crops flowered sooner after sowing, shortening crop duration and reducing total dry matter (TDM) production. Second, in the late January sowings of the medium- and late-maturing genotypes, harvest index (HI) declined as maturity was pushed later into autumn, exposing the crops to cooler temperatures during pod filling. Attempts to offset the decline in TDM production as sowing was delayed by using higher plant populations were unsuccessful, in part because HI decreased, apparently due to greater severity of lodging. The studies indicated that, in the near term, the yield potential of current indeterminate cultivars at the late December sowing date is adequate, given appropriate management, for commercially viable double-cropping of soybean in the MIA. In the longer term, it is suggested that development of earlier maturing, lodging-resistant genotypes that retain high HI at high sowing density may allow sowing to be delayed to early January.

Yield and yield structure of triticales compared with wheat in northern New South Wales

1992 ◽  
Vol 32 (4) ◽  
pp. 447 ◽  
Author(s):  
G Sweeney ◽  
RS Jessop ◽  
H Harris
Keyword(s):  
Field Experiments ◽  
New South ◽  
New South Wales ◽  
Moisture Stress ◽  
Grain Number ◽  
Wheat Varieties ◽  
Development Patterns ◽  
South Wales ◽  
Yield Structure ◽  
1000 Grain Weight

The yields and yield structure of cultivars of triticales and bread wheats (with a range of phasic development patterns in both species) were compared in 2 field experiments at Narrabri in northern New South Wales. The experiments were performed on a grey cracking clay soil with irrigation to prevent severe moisture stress. Triticales, both early and midseason types, appeared to have reached yield parity with well-adapted wheat varieties. Meaned over the 2 experiments and all sowings, the triticales yields were 19% greater than the bread wheats. Triticales were generally superior to wheat in all components of yield of the spike (1000-grain weight, grain number/spikelet and spikelet number/spike), whilst the wheats produced more spikes per unit area. The triticales also had higher harvest indices than the wheats. The results are discussed in relation to the overall adaptability of triticale for Australian conditions.

Optimising grain yield and grazing potential of crops across Australia’s high-rainfall zone: a simulation analysis. 2. Canola

2015 ◽  
Vol 66 (4) ◽  
pp. 349 ◽  
Author(s):  
Julianne M. Lilley ◽  
Lindsay W. Bell ◽  
John A. Kirkegaard
Keyword(s):  
Grain Yield ◽  
New South ◽  
New South Wales ◽  
Yield Potential ◽  
N Availability ◽  
Dual Purpose ◽  
High Rainfall ◽  
South Wales ◽  
Vernalisation Requirement ◽  
Crop Density

Recent expansion of cropping into Australia’s high-rainfall zone (HRZ) has involved dual-purpose crops suited to long growing seasons that produce both forage and grain. Early adoption of dual-purpose cropping involved cereals; however, dual-purpose canola (Brassica napus) can provide grazing and grain and a break crop for cereals and grass-based pastures. Grain yield and grazing potential of canola (up until bud-visible stage) were simulated, using APSIM, for four canola cultivars at 13 locations across Australia’s HRZ over 50 years. The influence of sowing date (2-weekly sowing dates from early March to late June), nitrogen (N) availability at sowing (50, 150 and 250 kg N/ha), and crop density (20, 40, 60, 80 plants/m2) on forage and grain production was explored in a factorial combination with the four canola cultivars. The cultivars represented winter, winter × spring intermediate, slow spring, and fast spring cultivars, which differed in response to vernalisation and photoperiod. Overall, there was significant potential for dual-purpose use of winter and winter × spring cultivars in all regions across Australia’s HRZ. Mean simulated potential yields exceeded 4.0 t/ha at most locations, with highest mean simulated grain yields (4.5–5.0 t/ha) in southern Victoria and lower yields (3.3–4.0 t/ha) in central and northern New South Wales. Winter cultivars sown early (March–mid-April) provided most forage (>2000 dry sheep equivalent (DSE) grazing days/ha) at most locations because of the extended vegetative stage linked to the high vernalisation requirement. At locations with Mediterranean climates, the low frequency (<30% of years) of early sowing opportunities before mid-April limited the utility of winter cultivars. Winter × spring cultivars (not yet commercially available), which have an intermediate phenology, had a longer, more reliable sowing window, high grazing potential (up to 1800 DSE-days/ha) and high grain-yield potential. Spring cultivars provided less, but had commercially useful grazing opportunities (300–700 DSE-days/ha) and similar yields to early-sown cultivars. Significant unrealised potential for dual-purpose canola crops of winter × spring and slow spring cultivars was suggested in the south-west of Western Australia, on the Northern Tablelands and Slopes of New South Wales and in southern Queensland. The simulations emphasised the importance of early sowing, adequate N supply and sowing density to maximise grazing potential from dual-purpose crops.

Effect of fertiliser phosphorus and nitrogen on the concentrations of oil and protein in grain and the grain yield of canola (Brassica napus L.) grown in south-western Australia

2007 ◽  
Vol 47 (8) ◽  
pp. 984 ◽  
Author(s):  
R. F. Brennan ◽  
M. D. A. Bolland
Keyword(s):  
Brassica Napus ◽  
Grain Yield ◽  
Western Australia ◽  
Field Experiments ◽  
Grain Production ◽  
Brassica Napus L ◽  
Single Superphosphate ◽  
P Deficiency ◽  
Soil P ◽  
Soil P Testing

The effect of fertiliser phosphorus (P) and nitrogen (N) on seed (grain) yield and concentration of oil and protein in grain of canola (oil-seed rape; Brassica napus L.) was measured in two field experiments undertaken at eight sites from 1993–2005 in south-western Australia, on soils deficient in P and N. Six rates of P (0–40 kg P/ha as single superphosphate) and four rates of N (0–138 kg N/ha as urea) were applied. Significant grain yield increases (responses) to applied P occurred in both experiments and these responses increased as rates of applied N increased. For grain production, the P × N interaction was significant in all eight years and locations of the two experiments. Application of P had no effect on concentration of oil and protein in grain. Application of N always decreased the concentration of oil and increased the concentration of protein in grain. For canola grain production in the region, responses to applied N always occur whereas responses to applied P are rare, but if soil P testing indicates likely P deficiency, both P and N fertiliser need to be applied.

Long-term benefits of limestone applications to soil properties and to cereal crop yields in southern and central New South Wales

2003 ◽  
Vol 43 (1) ◽  
pp. 71 ◽  
Author(s):  
M. K. Conyers ◽  
C. L. Mullen ◽  
B. J. Scott ◽  
G. J. Poile ◽  
B. D. Braysher
Keyword(s):  
Grain Yield ◽  
New South ◽  
New South Wales ◽  
Commercial Application ◽  
South Wales ◽  
Cereal Grain ◽  
Subsurface Soil ◽  
Acid Tolerant ◽  
The Cost

The cost of buying, carting and spreading limestone, relative to the value of broadacre crops, makes investment in liming a questionable proposition for many farmers. The longer the beneficial effects of limestone persist, however, the more the investment in liming becomes economically favourable. We re-established previous lime trials with the aim of measuring the long-term effects of limestone on surface acidity (pH run-down), subsurface acidity (lime movement) and grain yield. The study made use of experiments where there was adequate early data on soil chemical properties and cereal yields. We report data from 6 trials located at 4 sites between Dubbo and Albury in New South Wales. The rate of surface soil (0–10 cm) pH decline after liming was proportional to the pH attained 1 year after liming. That is, the higher the pH achieved, the more rapid the rate of subsequent pH decline. Since yields (product removal) and nitrification (also acid producing) may both vary with pH, the post-liming pH acts as a surrogate for the productivity and acid-generating rate of the soil–plant system. The apparent lime loss rate of the surface soils ranged from the equivalent of nearly 500 kg limestone/ha.year at pH approaching 7, to almost zero at pH approaching 4. At commercial application rates of 2–2.5 t/ha, the movement of alkali below the layer of application was restricted. However, significant calcium (Ca) movement sometimes occurred to below 20 cm depth. At rates of limestone application exceeding the typical commercial rate of 2.5 t/ha, or at surface pH greater than about 5.5, alkali and Ca movement into acidic subsurface soil was clearly observed. It is therefore technically feasible to ameliorate subsurface soil acidity by applying heavy rates of limestone to the soil surface. However, the cost and risks of this option should be weighed against the use of acid-tolerant cultivars in combination with more moderate limestone rates worked into the surface soil.There was a positive residual benefit of limestone on cereal grain yield (either barley, wheat, triticale, or oats) at all sites in both the 1992 and 1993 seasons. While acid-tolerant cultivars were less lime responsive than acid-sensitive ones, the best yields were generally obtained using a combination of liming and acid-tolerant cultivars.The long-term residual benefits of limestone were shown to extend for beyond 8–12 years and indicate that liming should be profitable in the long term.

Cereals for winter grazing on the Northern Tablelands of New South Wales

1974 ◽  
Vol 14 (71) ◽  
pp. 790 ◽  
Author(s):  
JV Lovett ◽  
EM Matheson
Keyword(s):  
Field Experiments ◽  
New South ◽  
New South Wales ◽  
Single Species ◽  
Winter Period ◽  
In Vitro Digestibility ◽  
Forage Production ◽  
Species Response ◽  
South Wales

In field experiments conducted over three years at Armidale, New South Wales, the total winter forage production by barley, oats, wheat and rye was similar. However, barley and rye tended to outyield wheat and oats at early harvests, the reverse applying at late harvests. It is suggested that these characteristics of the cereals could be exploited to meet specific seasonal requirements for dry matter production more effectively than is possible with a single species. Response to high seeding rates in forage production was similar in all cereals and was confined to a late sowing. Significant differences in in vitro digestibility over the winter period were recorded and differences were also apparent in subsequent grain yield.

Sign in / Sign up

Export Citation Format

Share Document