Trinexapac-ethyl application time in the crop corn agronomic performance grown under different plant arrangements

Reduced row spacing promotes more uniform spatial distribution of plants in the field. However, the adoption of reduced row spacing only is possible with smaller plants, which may be obtained with the use of plant growth regulator. This study aimed to evaluate the agronomic performance of the first corn crop with Trinexapac-ethyl applied at the different plant development stages and grown under different row spacing, with the same plant population. The experiments were arranged in a split-plot randomized block design with four replications, with row spacing for the plots (0.45 and 0.90 m) and Trinexapac-ethyl (TE) application time to subplots (control without application, at the V3, V6, V9 and V12 phenological stages). The Trinexapacethyl application time interacted with row spacings changing the growth and yield performance of the corn crop. For 0.45 m spacing Trinexapac-ethyl application at V12 and for 0.90 m spacing application at V9 and V12 reduced plant height and ear height. Trinexapac-ethyl application at V9 for both row spacings changed the plant architecture without changing the ear length and grain yield.

The Effect of Intercropping of Lablab (Lablab purpureus L.) and Cowpea (Vigna unguiculata L.) at Different Planting Densities on in vitro and in sacco Dry Matter Digestibility of Napier Grass (Pennisetum purpureum)

Background: The advantage of intercropping is the more efficient utilization of the all available resources and the increased productivity compared with each sole crop of the mixture. If cowpea and Lablab intercropping with Napier grass its nutritional values was improved. Methods: The experimental design was factorial combination arrangement in randomized complete block design with three inter and intra spaces (1 m × 0.5 m, 0.75 m × 0.5 m, 0.5 m × 0.5 m) and intercropping with two tropical legumes. Treatments were T1= Pure Napier grass at 1 m row spacing, T2= Napier grass intercropped with lablab at 0.75 m row spacing, T3= Napier grass intercropped with cowpea at 0.5 m row spacing, T4= Napier grass intercropped with cowpea at 1 m row spacing, T5= Napier grass intercropped with lablab at 0.5 m row spacing, T6= Pure Napier grass at 0.75 m row spacing, T7= Napier grass intercropped with lablab at 1 m row spacing, T8= Napier grass intercropped with cowpea at 0.75 m row spacing, T9= Pure Napier grass at 0.5 m row spacing and totally nine treatments were used. Soil samples were collected before and after forage harvested. Result: Napier grass intercropped with lablab and cowpea at different planting densities had significant effect (P less than 0.05) on the in vitro dry and organic matter digestibility (IVDMD, IVOMD) and increased digestibility. The OM degradation constant was significantly different (P less than 0.05) but ‘ED’ was not and for DM degradation ‘c’ and ‘b’ were non-significant (P greater than 0.05) for Napier grass intercropped with lablab and cowpea at different planting densities. In conclusion, Napier grass intercropped with lablab and cowpea at a planting density of 24 plants m-2 was better choice for high yield and forage quality.

Exogenous application of bio-stimulant and growth retardant improved the productivity of cotton cultivars under different planting arrangement

Optimum planting arrangement is an important attribute for efficient utilization of available resources and to obtain high yield of cotton. Application of plant growth promoter and retardant on cotton in improved planting density are the innovative techniques in the establishment of more productive cotton crop. Therefore, we planned a field study to assess the role of bio-stimulant and growth retardant in the resource utilization efficiency of cotton cultivars planted under variable row spacing at Agronomic Research Area Bahauddin Zakariya University and Usmania Agricultural Farm Shujabad during Kharif 2012. Experimental treatments consisted of cotton genotypes viz. CIM-573 and CIM-598, cultivated under conventional (75 cm), medium (50 cm) and ultra-narrow row spacing (25 cm) with foliar spray of bio-stimulant (moringa leaf extract) and growth retardant (mepiquate chloride), either sole or in combination, keeping distilled water as a control. Exogenously applied MLE alone and MLE + MC significantly enhanced the number of squares, flowers and green bolls per plant leading to higher cotton seed and lint yield of CIM 598 cultivar cultivated under conventional row spacing. While application of MC alone and MLE + MC produced maximum micronaire value, fiber strength and fiber uniformity ratio of CIM 573 cultivar cultivated under conventional row spacing. The results suggested that application of MLE is a possible approach to enhance the cotton productivity and the use of MC to enhance the fiber quality attributes under conventional row spacing.

Evaluation of sowing methods and nitrogen levels for grain yield and components of durum wheat under arid region of Egypt

The present experiment was conducted at private farm during 2018/19 and 2019/20 seasons. The investigated area lies within the extremely arid belt, having long hot summer and short warm winter. The main goal of this investigation was to evaluate the effect of different sowing methods on yield components of wheat, using split plot design with three replications. Sowing methods in main plot were broadcasting method, row spacing 10, 15 and 20 cm apart). Nitrogen fertilizer levels in sub plot were 60, 75 and 90 kg N fed-1 (fed = 4200 m-2). The increase percentage due to row spacing at 20 cm apart (M4) compared to broadcasting method (M1) were (23.30 & 26.74%) for spike length; (5.11 & 6.94 %) for 1000 grain weight and (8.02 & 7.74%) for grain yield and according ally (3.07 & 3.08%) for harvest index in both seasons, respectively. Overall, from the present study the sowing method in rows with 20 cm apart and the optimum N fertilizer rate (90 kg fed-1) for durum wheat production in the soils of Qasir, Dakhala oasis on silt loam soil was the best treatment.

Peculiarities of growth and development and productivity of Savoy cabbage varieties (Brassica sabauda Lizg.) in the conditions of the Right-Bank Forest-Steppe of Ukraine

Purpose. To establish the peculiarities of growth and development and formation of productivity of Savoy cabbage varieties (Brassica sabauda Lizg.) in the conditions of the Right-Bank Forest-Steppe of Ukraine. Methods. The research was conducted in the Research and Production Department of Uman National University of Horticulture in the years 2018–2020. Varieties of savoy cabbage (‘Vertu 1340’ – control, ‘Sphere’, ‘Rozali’ and ‘Vertus’) were planted according to the scheme 70 × 40 cm (35.7 thousand plants/ha). Results. During the sowing of seeds (April 25) on cold ridges in a row method with a row spacing of 10 cm, mass shoots of Savoy cabbage were observed on average in early May (7–8 days), the beginning of head formation – in the middle of August, and their technical maturity in late September. Intensive growth of heads took place in the middle and late August and ended in late September. On average, over the years of research, the largest diameter of the head was observed in the cultivars ‘Vertu 1340’ – 18.7 cm, the smallest in the ‘Rosalie’ – 16.1 cm. at one level – 17.5 and 17.6 cm, respectively. The smallest in height at the level of the rosette and head were plants of the ‘Sphere’ and ‘Vertus’ varieties – 25.4 and 23.4 cm and 26.9 and 24.6 cm, respectively. The control variety ‘Vertu 1340’ was characterized by the highest indicators of height of both the rosette (40.7 cm) and the actual head (36.5 cm). Slightly lower rates were observed in the variety ‘Rosalie’ – 32.9 and 31.8 cm, respectively. The highest yields were formed by Savoy cabbage varieties ‘Vertus’ (53.1 t/ha) and ‘Sphere’ (51.8 t/ha), which exceeded the control variant by 7.4 and 6.1 t/ha, respectively (‘Vertu 1340’ – 45.7 t/ha). The least productive among the studied assortment was ‘Rosalie’ yielding 39.9 t/ha. Conclusions. When grown in the Forest-Steppe of Ukraine, the highest yields of marketable products are formed by Savoy cabbage varieties ‘Sphere’ and ‘Vertus’.

Impacts of row spacing and fungicide timing on foliar disease, greenstem and yield in double cropped soybeans grown in the Chesapeake Bay region of the United States.

Double cropped soybeans are planted on approximately 1/3 of crop acres in the Chesapeake Bay region of the United States. Producers have asked if foliar fungicides are required to optimize yields in this region. We assessed the impacts of foliar fungicide application timing and row spacing on foliar disease, greenstem, and yield from 11 site years spanning 2017-2019. Foliar diseases only developed at rateable levels in one location. Fungicide application, regardless of timing, increased percent greenstem over non-treated controls. Fungicide application did not impact soybean yield. Yield was greater in 38.1 cm rows when compared to 19 cm rows. Our data do not support the use of foliar fungicides in double cropped soybean production in this region.

Sowing Systems as a Factor of Grain Yield in Sunflower Production

The paper presents the results of a triennial study of the sowing system influence on the yied, grain weight per head, plant set per ha and of the grain moisture of a medium-early sunflower hybrid . Standard sowing was performed with the PSK OLT sowing machine at a row spacing amounting to 70 cm, while a twin row sowing was performed with the MaterMacc Twin Row-2 sowing machine at a row spacing of 22*48 cm. Both sowing machines were adjusted according to the ISO standard 7256/1 and 7256/2, with a high QFI index (PSK OLT: 96.32 %; MaterMacc Twin Row-2: 93.93 %). The research was conducted at the Gorjani Experimental Field on psudogley bearing the textured markings of a silty loam, with a weak acid reaction and a small amount of humus. An analysis of variance determined a statistical significance of the sowing system on the grain yield and the grain mass per sunflower head. Sowing in twin rows achieved the higher yields for all three research years : 19.59% in 2017, 19.11% in 2018, and 18.45% in 2019. Plant density was not statistically significantly affected by the sowing systems and vegetation year, but the grain moisture was statistically significantly different between the analyzed research years .

Faba Bean Agronomic and Crop Physiology Research in Ethiopia

Faba bean is an important pulse crop in terms of protein source, area coverage, and volume of annual production in Ethiopia. The aim of this paper is to assess the agronomic and crop physiology investigations in the past two decades in Ethiopia. The production limiting factors of this crop are low input usage, natural disasters, depletion of macronutrients, and unavailability of essential nutrients. Phosphorus is among the main limiting nutrients in soil systems in Ethiopia. Seed yield and biomass yield of faba bean were increased from 1338 to 1974 kg/ha and from 3124 to 4446 kg/ha when phosphorous was changed from 0 to 52 kg/ha, respectively at Holeta whereas application of 40 kg P ha − 1 resulted in higher grain yield (6323 kg ha−1) and 3303 kg ha−1 at Lemu-Bilbilo and Bore highlands, respectively. The highest grain yield of 32 kg ha−1 was obtained from the application of 92 kg P2O5 ha−1 at Sekela district while application of 46 kg P2O5 ha−1 resulted in a substantial increase in seed yield over unfertilized plots on vertisols of Ambo. On the other hand, the results suggest that using starter nitrogen from 0 to 27 kg/ha has marginally increased faba bean yield but, a farther increase of nitrogen has indicated deteriorate of yield at Arsi zone. Proper plant populations play a crucial role in enhancing faba bean production. Planting faba bean at 30 cm × 15 cm spacing gave the highest grain yield in Duna district while it was 30 × 7.5 cm at vertisols of Ambo University research farm. Significantly higher seed yield (4222 kg/ha) was observed in the 40 cm inter-row spacing as compared to 50 cm inter-row spacing, which gave the lowest seed yield per hectare (3138 kg/ha) on fluvisols of Haramaya University. Intercropping and crop rotation are cropping systems that can increase soil fertility and crop yield. Intercropping of faba bean with barley at Debre Birhan increased land equivalent ratio than both crops when planted as sole. An additional income of 18.5% and 40% was gained than planting sole faba bean and wheat, respectively at Kulumsa. Faba bean can fix about 69 kg/ha nitrogen in Northern Ethiopia. Generally, the current review results showed that only limited studies in organic and bio fertilizer, plant density, and cropping systems were done on faba bean in Ethiopia. Hence, studies regarding soil acidity, organic fertilizer, and secondary plus micronutrient impacts on faba bean production and productivity along soil types and weather conditions need great attention in the future in Ethiopia.