Effect of soil moisture stress on growth light azimuth and yield of dryland sorghum

Based on weekly data for 4 years (1986-1989) at Bellary, soil moisture balance for rabi sorghum has been worked out for both irrigated and non-irrigated conditions. These soil moisture values have been used to identify periods of water stress which the crop experienced. during the growth cycle. The extent of yield reduction due to the stress was then evaluated from the actual soil water content and total available water extent and discussed. The ratio of evapotranspiration to potential evapotranspiration and water requirement of the crop has also been worked out to assess the stress situation of the crop during its growing period. This ratio has been found to be related to moisture availability at the root zone.

Effect of the cure time on the Mechanical Properties of Silicone Rubber used as Socket Liners

This work is focused on the upper part of the prosthesis which is called a socket, it is in contact connect with the amputated part. The shear force between skin and socket, local pressure, sweating, and bacteria generation, all lead to skin inflammation and a bad smell. Consequently, the prosthesis became uncomfortable for a patient. To address this issue silicone rubber liners is proposed to use because it can absorb moisture, stress distribution, and anti-bacterial. The curing time and temperature are important factors for determining crosslink density, from the results obtained, can be noticed that, the cross-link density can greatly affect the silicone rubber properties, it can have a direct effect on the tensile strength, modulus of elasticity, percentage of elongation as well as the water absorption, and the cure time (15 min.) shoes the best resalt. As a result, using it making the prosthesis more comfortable and acceptable to the patient. In this paper, the effect of cure time on physical properties was studied.

Behaviour of relative evapotranspiration with agrometeorological stress indices in wheat

Complex behaviour of stress indices with relative evapotranspiration was observed in early and late sown wheat, however, under normal sown conditions it was linearly decreasing. Predawn leaf water potential and transpiration rate proved to be a stable stress index parameter for characterizing the internal moisture status in the plant as compared to the canopy temperature and stomatal resistance under stress conditions in wheat. Since it is easy to quantify canopy/leaf temperature and within seasonal variations it is widely used for scheduling irrigation and quantigying moisture stress effects on growth and development in wheat.

​Studies on Heterotic Trends in Blackgram [Vigna mungo (L.) Hepper] for Yield and Earliness

Background: As blackgram cultivation is majorly spread in rain fed areas, breeding short duration and high yielding blackgram varieties is of profound importance to tackle terminal moisture stress and reap impressive yields by breaking the yield plateau. Hence, the present study was aimed to identify highly heterotic cross combinations for yield and earliness. Methods: Six parents along with 15 F1s were evaluated (rabi, 2019) for seed yield and its component traits along with earliness to estimate the magnitude of heterosis. Result: The cross LBG-752 × TBG-104 exhibited heterosis estimates in desirable direction for yield and earliness. The next best crosses were LBG-752 × PU-31, TU-40 × TBG-104, LBG-752 × TU-40 and IPU-2-43 × TBG-104. Because of its autogamous genetic architecture and biological constraints in large scale economic hybrid seed production, heterosis could be exploited only by isolating the early maturing and high yielding segregants followed by bi-parental or recurrent selection in early segregating generations and single plant selection in subsequent generations that would result in short duration and high yielding blackgram variety that fits well into different ecological niches.

Effects of salicylic and benzoic acid on yield and yield components of moisture stressed tomato (solanum lycopersicun l.) at Kadawa Sudan Savannah

Salicylic acid and Benzoic acids are antitranpirants usually used to reduce the rate of moisture loss and increase productivity of irrigated crops. To test antitranspiracy of Salicylic and Benzoic acids, field experiments were conducted during the two successive dry Seasons of 2011/2012 and 2012/2013 at the Agricultural Research Station Farm, Kadawa (11̊ 38ʹ 40.3ʺ N,8̊ 25ʹ3.9ʺ E) 498m elevation above sea level. The aim was to study the effects of antitranspirants and moisture stress on crop growth and development stages of tomato. The treatments consisted of two antitranspirants at four different concentrations of 0, 200, 400 and 600 ppm, and three moisture stress stages, vegetative, flowering and fruit setting. Antitranspirants and moisture stresses were assigned to the main plot and concentrations were used as sub–plot treatment. These were replicated three times and laid out in a split-plot design. The gross plot size was 3.6m x 3.0m (10.8m2) consisting of 6 rows of 3m length, while the net plot size was 1.2m 1.8m (2.16 m2) consisting of 2 inner most rows. Data were taken on tomato growth and yield attributes. Data generated were analysed using statistical analytics software (SAS). The results of the study revealed that application of both Antitranspirants enhanced growth and yield components such as fruit diameter, number of fruits plant1, average fruit weight, marketable fruit yield and total fruit yield of tomato. Significant interactions between and among the factors were also recorded for fruit diameter, number of fruits plant-1 marketable fruit yield and the total fruit yield. Application of 200 and 400 ppm of of Salicylic acid at fruit setting produced the highest total fruit yield (6.66 tha-1) which was statistically similar to 600 ppm of Benzoic (6.10 t ha-1) at flowering while the control had the lowest. Total fruit yield was positively and significantly correlated with number of fruit plant-1 and average fruit weight. Number of fruits plant-1 was found to have the highest direct contribution to the yield. Flowering and fruiting stages were found to be the critical growth stages for moisture stress of tomato. Foliar application of 400 ppm of Salicylic acid at fruit setting stage appeared to promote tomato yield in the study area.