Corrigenda - The effects of minimum cultivation after three years on some physical and chemical properties of a red-brown earth at Forbes, NSW.

Soil Research ◽  
1991 ◽  
Vol 29 (2) ◽  
pp. 263 ◽  
Author(s):  
PP Cavanagh ◽  
AJ Koppi ◽  
AB Mcbratney
Keyword(s):  
Organic Carbon ◽  
Physical Properties ◽  
Bulk Density ◽  
Total Nitrogen ◽  
Chemical Properties ◽  
Water Infiltration ◽  
Electrolytic Conductivity ◽  
Physical And Chemical Properties ◽  
Physical And Chemical ◽  
And Chemical Properties

Reducing cultivation may improve many soil physical and chemical properties of a red-brown earth. A trial was set up in 1986 on a red-brown earth near Forbes, N.S.W., comparing direct-drilling and conventional-cultivation crop establishment techniques. The surface soil (0-100 mm) was sampled at the end of the third year and assessed for macropore structure, infiltration characteristics, bulk density, pH, electrolytic conductivity, organic carbon and total nitrogen content. Cultivation degraded some desirable soil physical properties as indicated by data obtained from image analysis and infiltration. Bulk density did not mirror differences in macroporosity. Organic carbon, total nitrogen and electrolytic conductivity levels were higher in direct-drilled soil in comparison to conventionally tilled soil. It ib concluded that the improvement of soil chemical and physical properties afforded by a reduction in tillage would lead to an increase in soil water infiltration rate and storage.

The effects of minimum cultivation after three years on some physical and chemical properties of a red-brown earth at Forbes, NSW.

Soil Research ◽  
1991 ◽  
Vol 29 (2) ◽  
pp. 263
Author(s):  
PP Cavanagh ◽  
AJ Koppi ◽  
AB Mcbratney
Keyword(s):  
Organic Carbon ◽  
Physical Properties ◽  
Bulk Density ◽  
Total Nitrogen ◽  
Chemical Properties ◽  
Water Infiltration ◽  
Electrolytic Conductivity ◽  
Physical And Chemical Properties ◽  
Physical And Chemical ◽  
And Chemical Properties

Reducing cultivation may improve many soil physical and chemical properties of a red-brown earth. A trial was set up in 1986 on a red-brown earth near Forbes, N.S.W., comparing direct-drilling and conventional-cultivation crop establishment techniques. The surface soil (0-100 mm) was sampled at the end of the third year and assessed for macropore structure, infiltration characteristics, bulk density, pH, electrolytic conductivity, organic carbon and total nitrogen content. Cultivation degraded some desirable soil physical properties as indicated by data obtained from image analysis and infiltration. Bulk density did not mirror differences in macroporosity. Organic carbon, total nitrogen and electrolytic conductivity levels were higher in direct-drilled soil in comparison to conventionally tilled soil. It ib concluded that the improvement of soil chemical and physical properties afforded by a reduction in tillage would lead to an increase in soil water infiltration rate and storage.

scholarly journals Effects of four organic amendments on soil physiochemical properties and yield of maize (Zea mays) and cowpea (Vigna unguiculata) intercrop in Awka, southeastern Nigeria

Agro-Science ◽  
2021 ◽  
Vol 20 (2) ◽  
pp. 49-56
Author(s):  
A.O. Onunwa ◽  
C.J. Nwaiwu ◽  
J.E. Nwankwor ◽  
C.E. Emeh ◽  
C.O. Madueke ◽  
...  
Keyword(s):  
Organic Carbon ◽  
Bulk Density ◽  
Soil Ph ◽  
Poultry Manure ◽  
Organic Amendments ◽  
Chemical Properties ◽  
Available Phosphorus ◽  
Physical And Chemical Properties ◽  
Physical And Chemical ◽  
And Chemical Properties

Effects of four organic amendments on some soil physical and chemical properties were investigated in Awka, Anambra State in southeastern Nigeria. Over the years, use of synthetic materials in crop production has been a common practice globally. The attendant detrimental effects of the chemicals used in the formulation of these synthetics on animal and human health as well as the environment has made researchers to look out for a better agronomic practice that would not only improve productivity but at the same time sustain a healthy environment. Sole maize, sole cowpea and maize-cowpea intercrop (study area conventional practices) were planted using four soil organic amendments viz: cassava peel (CP), poultry manure (PM), pig waste (PW) and rice husk (RH) at the rate of 20 t ha–1 with the fifth as the control. The treatments were laid out in a 3 × 5 factorial in randomized complete block design and replicated four times. Data on the treatments’ effects on the selected soil physical properties (bulk density, total porosity, soil moisture) and chemical properties (soil pH, available phosphorus, cation exchange capacity (CEC), organic carbon, exchangeable bases and exchangeable acidity) were subjected to factorial analysis of variance using GenStat 2006 Edition. Results indicated that for sole maize, the amendments had significant effect onexchangeable Al3+and Na+; organic carbon, soil pH, available phosphorus and CEC but had no significant effect on Ca2+, H+, Mg2+ and K+ as compared to the control. For sole cowpea, compared to the plots with no amendment (control), all the chemical parameters analyzed differed significantly except organic carbon. Whereas, for maize-cowpea intercrop the treatments had no significant effect on Al3+, Na+, K+ and available phosphorus but differed significantly in exchangeable H+, Ca2+, Mg2+, organic carbon, soil pH, and CEC. There was a decrease in bulk density following the amendment. For sole maize, sole cowpea and maizecowpea intercrop; bulk density, total porosity and moisture content of the amended plots were significantly (p< 0.05) influenced. Organic amendments also significantly improved the growth and yield of maize and cowpea in both the sole and intercrop systems. Generally, poultry manure resulted in higher plant height,number of leaves and leaf area for maize; vine length, number of branches for cowpea as compared with other amendments. Hence, poultry manure was the most effective organic amendment in improving the soil physical and chemical properties as well as the growth and yield of cowpea and maize. Key words: Growth, maize-cowpea intercrop, soil physical and chemical properties, soil organic amendments

scholarly journals Chemical and Physical Properties of Some Hazelnut Varieties Grown in Portugal

Agronomy ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 1476
Author(s):  
Ana Cristina Ferrão ◽  
Raquel P. F. Guiné ◽  
Elsa Ramalhosa ◽  
Arminda Lopes ◽  
Cláudia Rodrigues ◽  
...  
Keyword(s):  
Discriminant Analysis ◽  
Physical Properties ◽  
Water Activity ◽  
Induction Time ◽  
Oxidation Stability ◽  
Chemical Properties ◽  
Physical And Chemical Properties ◽  
Nutritional Characteristics ◽  
Physical And Chemical ◽  
And Chemical Properties

Hazelnuts are one of the most appreciated nuts worldwide due to their unique organoleptic and nutritional characteristics. The present work intended to analyse several physical and chemical properties of different hazelnut varieties grown in Portugal, namely Tonda de Giffoni, Grada de Viseu, Segorbe, Longa de Espanha, Butler, Gunslebert, and Negreta. In general, the results revealed statistically significant differences between the varieties under study. The Gunslebert had more elongated hazelnuts and with heavier shelled fruits, while the kernels of the Grada de Viseu revealed to be heavier. Grada de Viseu was harder in the shell, Gunslebert had a harder core, and Segorbe was more resistant to fracture. Fat was the more representative component for all varieties and in some cases the values of moisture and water activity were over the recommended amount (≥0.62). Tonda de Giffoni was the variety with the highest induction time, indicating the highest oxidation stability. Moreover, discriminant analysis revealed that the variables more important to distinguish the varieties were protein (λ = 0.007) and water activity (λ = 0.010). The results of this study help to better understand the differences between some hazelnut varieties that are cultivated in Portugal, which gives important hints for all players in the hazelnut sector.

scholarly journals Effect of Mosses on physical and chemical properties of soil in temperate forests of Garhwal Himalayas

2021 ◽  
pp. 1-10
Author(s):  
Anshu Siwach ◽  
Siddhartha Kaushal ◽  
Ratul Baishya
Keyword(s):  
Physical Properties ◽  
Chemical Properties ◽  
Nutrient Status ◽  
High Rate ◽  
Physical And Chemical Properties ◽  
Garhwal Himalayas ◽  
Forest Sites ◽  
Significant Difference ◽  
Physical And Chemical ◽  
And Chemical Properties

Abstract Mosses are one of the most important and dominant plant communities, especially in the temperate biome, and play a significant role in ecosystem function and dynamics. They influence the water, energy and element cycle due to their unique ecology and physiology. The present study was undertaken in three different temperate forest sites in the Garhwal Himalayas, viz., Triyuginarayan (Kedarnath Wildlife Sanctuary (KWLS)), Chakrata, and Kanasar forest range. The study was focused on understanding the influence of mosses on soil physical properties and nutrient availability. Different physico-chemical properties were analysed under two different substrata, that is, with and without moss cover in two different seasons, viz., monsoon and winter. We observed mosses to influence and alter the physical properties and nutrient status of soil in both seasons. All soil physical and chemical properties, except magnesium, showed significant difference within the substrates, among all the sites and across the two seasons. Besides the soil characteristics underneath the moss vegetation, the study also highlights the diversity of mosses found in the area. Mosses appear to create high nutrient microsites via a high rate of organic matter accumulation and retain nutrients for longer periods thus, maintaining ecosystem stability.

Study of Relative Metallic Character of Noble Metals Cu, Ag and Au at Normal Temperatures

2021 ◽  
Vol 1019 ◽  
pp. 174-178
Author(s):  
Ramesh Kumar ◽  
Priti Kumari ◽  
Kumar Saurav ◽  
Purushottam Poddar ◽  
Vijay Kumar Verma
Keyword(s):  
Physical Properties ◽  
Noble Metals ◽  
Chemical Properties ◽  
Physical And Chemical Properties ◽  
Metallic Character ◽  
Physical And Chemical ◽  
And Chemical Properties

The relative metallic character of noble metals, Cu, Ag & Au has been suggested by their physical and chemical properties. Their position in the metallic series is in the neighborhood of that of Li, Mg and Zn. These Metals are inferior of Li, Mg, Zn, Fe, Co and Ni in metallic character. Li, Mg, Zn, Fe, Co and Ni are inferior to Na, K, Rb, Cs, Ca, Ba and Sr. The noble metals have simple metallic character in physical properties at normal temperatures.

Study of the Chemical and Physical Properties of the Fiber-Matrix Interface of Biocomposite Material Based on a Copolymer Matrix Polylactic Acid (PLA)

2019 ◽  
Vol 12 (1) ◽  
pp. 70-78
Author(s):  
Mokhtaria Ould Kada ◽  
Allel Mokaddem ◽  
Bendouma Doumi ◽  
Mohamed Berber ◽  
Lahouari Temimi ◽  
...  
Keyword(s):  
Physical Properties ◽  
Polylactic Acid ◽  
Probabilistic Approach ◽  
Chemical Properties ◽  
Physical And Chemical Properties ◽  
Matrix Interface ◽  
Fiber Matrix Interface ◽  
Fiber Matrix ◽  
Physical And Chemical ◽  
And Chemical Properties

Background: In this paper, we have studied the improvement of the physical and chemical properties of the fiber-matrix interface of a Biocomposite based on the copolymer polylactic acid (PLA). Methodology: We have developed an analytical model using a genetic approach to locate the interface damage under the effect of mechanical stress, temperature and humidity. Our simulation is based on Weibull's probabilistic approach and the law of water diffusion in polymer matrix, the diffusion is generated by Fick's law. Results: Our results show that the interface of Biocomposite (Starch-PLA) is the most resistant to the different constraints applied and that the physical and chemical properties of this material are much more improved compared to other materials studied by the same genetic model. Conclusion: Our calculations coincide perfectly with the conclusions of Antoine et al. who determined that natural fibers improve the physical properties of composite materials.

scholarly journals SOIL PHYSICAL AND CHEMICAL PROPERTIES AND COCOYAM YIELD UNDER DIFFERENT TILLAGE SYSTEMS IN A TROPICAL ALFISOL

2011 ◽  
Vol 47 (3) ◽  
pp. 477-488 ◽  
Author(s):  
A. O. ADEKIYA ◽  
S. O. OJENIYI ◽  
T. M. AGBEDE
Keyword(s):  
Bulk Density ◽  
Chemical Properties ◽  
Soil Bulk Density ◽  
Soil Chemical Properties ◽  
Growth And Yield ◽  
Physical And Chemical Properties ◽  
Southwest Nigeria ◽  
Physical And Chemical ◽  
Tillage Methods ◽  
And Chemical Properties

SUMMARYExperimental data on tillage requirement of cocoyam (Xanthosoma sagittifolium) are needed to identify the most suitable tillage methods for managing the fragile Alfisols of the humid tropics to ensure sustained productivity. Hence, five tillage methods were compared as to their effects on soil physical and chemical properties, and growth and yield of cocoyam on an Alfisol at Owo in the forest-savanna transition zone of southwest Nigeria. The experiment consisted of five tillage methods: manual clearing (MC), manual ridging (MR), manual mounding (MM), ploughing + harrowing (P + H) and ploughing + harrowing twice (P + 2 H) were used for three years at two sites in a randomized complete block design with three replications. In the first two years (2007 and 2008), P + H produced the least soil bulk density and highest growth and yield, whereas in the third year (2009), MC produced the lowest soil bulk density and best performance of cocoyam. Manual clearing produced the best values of soil chemical properties in 2008 and 2009. Averaged over the three years, P + H, MR and MM had lower soil bulk density hence better growth and yield compared with P + 2 H and MC. Over the three years MC, MM, MR and P + H increased cocoyam cormel yield by 10, 21, 23 and 32%, respectively, over P + 2 H.The corresponding increases in corm yield were 7, 15, 13 and 21%, respectively. The multiple regressions revealed that bulk density and moisture content significantly influenced the yield of cocoyam. Soil chemical properties were not significant. Bulk density rather than soil chemical properties dictated the performance of cocoyam in an Alfisol of southwest Nigeria. Soil quality was degraded by P + 2H. For small farms, either MR or MM is recommended while P + H is recommended for large-scale farming of cocoyam.

MICROMORPHOLOGICAL, PHYSICAL, AND CHEMICAL PROPERTIES OF A PODZOLIC SOIL WITH A FRAGIPAN

1974 ◽  
Vol 54 (1) ◽  
pp. 29-38 ◽  
Author(s):  
C. R. DE KIMPE ◽  
J. A. McKEAGUE
Keyword(s):  
Bulk Density ◽  
Podzolic Soil ◽  
Amorphous Material ◽  
Chemical Properties ◽  
Clay Mineralogy ◽  
Physical And Chemical Properties ◽  
Marked Contrast ◽  
Physical And Chemical ◽  
Highly Porous ◽  
And Chemical Properties

The soil had a thick, dark brown, highly porous Podzolic B horizon with a high content of amorphous Fe, Al- organic matter complex material and a low bulk density, underlain abruptly by a dense, gray fragipan with a bulk density of nearly 2 g/cm3. Mean pore diameters of subhorizons within the Podzolic B ranged from about 25 to 120 μm and those of the fragipan were about 0.5 μm. The marked contrast in porosity was consistent both with hydraulic conductivity values of about 20 cm/h in the Podzolic B and 0.2 cm/h in the fragipan, and with the micromorphology. Strongly oriented argillans in the fragipan indicated some clay translocation. The clay mineralogy indicated weak weathering of phyllosilicates, but appreciable weathering of primary minerals must have occurred to produce the amorphous Fe and Al- rich amorphous material in the Podzolic B. Seepage along the surface of the fragipan, and the absence of roots in this layer indicated the significance of this horizon with respect to plant growth and to the water regime of the soil.

The Compounding of Hard Rubber (Natural and Synthetic)

1950 ◽  
Vol 23 (1) ◽  
pp. 266-280 ◽  
Author(s):  
W. Murray Gall
Keyword(s):  
Physical Properties ◽  
Chemical Properties ◽  
High Grade ◽  
Physical And Chemical Properties ◽  
Similar Materials ◽  
Physical And Chemical ◽  
Plastics Industry ◽  
And Chemical Properties ◽  
Natural And Synthetic

Abstract Hard rubber, frequently called ebonite, is a material which has many desirable physical and chemical properties. The relatively new plastics industry has offered stiff competition, yet it is reasonably safe to say that, for certain applications, nothing else can be substituted for hard rubber and still maintain its unique properties. One of the principal qualities of this material is its finished appearance. When a high-grade ebonite compound is properly processed, it can be given a high lustrous finish which sets it apart from similar materials for beauty and richness. The highest grade of hard rubber is a compound containing only rubber and sulfur. It is in this type of compound that maximum physical properties and highest luster are found.

Sign in / Sign up

Export Citation Format

Share Document