scholarly journals Uniform hexagonal graphene flakes and films grown on liquid copper surface

2012 ◽  
Vol 109 (21) ◽  
pp. 7992-7996 ◽  
Author(s):  
D. Geng ◽  
B. Wu ◽  
Y. Guo ◽  
L. Huang ◽  
Y. Xue ◽  
...  
Small ◽  
2021 ◽  
Vol 17 (40) ◽  
pp. 2170210
Author(s):  
Fengning Liu ◽  
Jichen Dong ◽  
Na Yeon Kim ◽  
Zonghoon Lee ◽  
Feng Ding

Small ◽  
2021 ◽  
pp. 2103484
Author(s):  
Fengning Liu ◽  
Jichen Dong ◽  
Na Yeon Kim ◽  
Zonghoon Lee ◽  
Feng Ding

Materials ◽  
2020 ◽  
Vol 13 (11) ◽  
pp. 2606
Author(s):  
Dominika Kuten ◽  
Konrad Dybowski ◽  
Radomir Atraszkiewicz ◽  
Piotr Kula

To access the properties of theoretical graphene, it is crucial to manufacture layers with a defect-free structure. The imperfections of the structure are the cause of deterioration in both electrical and mechanical properties. Among the most commonly occurring crystalline defects, there are grain boundaries and overlapping zones. Hence, perfect graphene shall be monocrystalline, which is difficult and expensive to obtain. An alternative to monocrystalline structure is a quasi-monocrystalline graphene with low angle-type boundaries without the local overlapping of neighboring flakes. The purpose of this work was to identify factors that directly affect the structure of graphene grown on a surface of a liquid metal. In the article the growth of graphene on a liquid copper is presented. Nucleating graphene flakes are able to move with three degrees of freedom creating low-angle type boundaries when they attach to one another. The structure of graphene grown with the use of this method is almost free of overlapping zones. In addition, the article presents the influence of impurities on the amount of crystallization nuclei formed, and thus the possibility to order the structure, creating a quasi-monocrystalline layer.


2021 ◽  
pp. 129396
Author(s):  
Seyyed Alireza Hashemi ◽  
Seyyed Mojtaba Mousavi ◽  
Hamid Reza Naderi ◽  
Sonia Bahrani ◽  
Mohammad Arjmand ◽  
...  

Polymers ◽  
2021 ◽  
Vol 13 (11) ◽  
pp. 1721
Author(s):  
Mario Mora ◽  
Hippolyte Amaveda ◽  
Luis Porta-Velilla ◽  
Germán F. de la Fuente ◽  
Elena Martínez ◽  
...  

The objective of this work is the enhancement of metal-to-metal bonding to provide high thermal conductivity together with electrical insulation, to be used as heat sinks at room and cryogenic temperatures. High thermal conductive metal (copper) and epoxy resin (Stycast 2850FT) were used in this study, with the latter also providing the required electrical insulation. The copper surface was irradiated with laser to induce micro- and nano-patterned structures that result in an improvement of the adhesion between the epoxy and the copper. Thus, copper-to-copper bonding strength was characterized by means of mechanical tensile shear tests. The effect of the laser processing on the thermal conductivity properties of the Cu/epoxy/Cu joint at different temperatures, from 10 to 300 K, is also reported. Using adequate laser parameters, it is possible to obtain high bonding strength values limited by cohesive epoxy fracture, together with good thermal conductivity at ambient and cryogenic temperatures.


2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Peiran Zhang ◽  
Joseph Rufo ◽  
Chuyi Chen ◽  
Jianping Xia ◽  
Zhenhua Tian ◽  
...  

AbstractThe ability to precisely manipulate nano-objects on a large scale can enable the fabrication of materials and devices with tunable optical, electromagnetic, and mechanical properties. However, the dynamic, parallel manipulation of nanoscale colloids and materials remains a significant challenge. Here, we demonstrate acoustoelectronic nanotweezers, which combine the precision and robustness afforded by electronic tweezers with versatility and large-field dynamic control granted by acoustic tweezing techniques, to enable the massively parallel manipulation of sub-100 nm objects with excellent versatility and controllability. Using this approach, we demonstrated the complex patterning of various nanoparticles (e.g., DNAs, exosomes, ~3 nm graphene flakes, ~6 nm quantum dots, ~3.5 nm proteins, and ~1.4 nm dextran), fabricated macroscopic materials with nano-textures, and performed high-resolution, single nanoparticle manipulation. Various nanomanipulation functions, including transportation, concentration, orientation, pattern-overlaying, and sorting, have also been achieved using a simple device configuration. Altogether, acoustoelectronic nanotweezers overcome existing limitations in nano-manipulation and hold great potential for a variety of applications in the fields of electronics, optics, condensed matter physics, metamaterials, and biomedicine.


Sign in / Sign up

Export Citation Format

Share Document