Modeling Interface Debonding in Coated Fuel Particles with BISON

2021 ◽  
pp. 1-9
Author(s):  
Daniel Schappel ◽  
Giovanni Pastore ◽  
Kurt A. Terrani
Keyword(s):  
Interface Debonding ◽  
Fuel Particles

Irradiation behavior of pyrolytic silicon carbide

1983 ◽  
Vol 41 ◽  
pp. 72-73
Author(s):  
R. J. Lauf
Keyword(s):  
Silicon Carbide ◽  
Fission Products ◽  
Thermodynamics And Kinetics ◽  
Neutron Fluences ◽  
Fuel Particles ◽  
Sic Coatings ◽  
Irradiation Behavior ◽  
Kinetics Of ◽  
Htgr Fuel

Fuel particles for the High-Temperature Gas-Cooled Reactor (HTGR) contain a layer of pyrolytic silicon carbide to act as a miniature pressure vessel and primary fission product barrier. Optimization of the SiC with respect to fuel performance involves four areas of study: (a) characterization of as-deposited SiC coatings; (b) thermodynamics and kinetics of chemical reactions between SiC and fission products; (c) irradiation behavior of SiC in the absence of fission products; and (d) combined effects of irradiation and fission products. This paper reports the behavior of SiC deposited on inert microspheres and irradiated to fast neutron fluences typical of HTGR fuel at end-of-life.

Microstructural Evaluation of Silicon Carbide Whisker Reinforced Alumina Fabricated with Carbon-Coated Whiskers

1991 ◽  
Vol 49 ◽  
pp. 920-921
Author(s):  
K. B. Alexander ◽  
P. F. Becher
Keyword(s):  
Silicon Carbide ◽  
High Resolution Electron Microscopy ◽  
Ceramic Composites ◽  
Interface Debonding ◽  
Resolution Electron ◽  
Microstructural Evaluation ◽  
Carbon Coated ◽  
Electron Energy Loss ◽  
Interfacial Films ◽  
Debonding Process

The presence of interfacial films at the whisker-matrix interface can significantly influence the fracture toughness of ceramic composites. The film may alter the interface debonding process though changes in either the interfacial fracture energy or the residual stress at the interface. In addition, the films may affect the whisker pullout process through the frictional sliding coefficients or the extent of mechanical interlocking of the interface due to the whisker surface topography.Composites containing ACMC silicon carbide whiskers (SiCw) which had been coated with 5-10 nm of carbon and Tokai whiskers coated with 2 nm of carbon have been examined. High resolution electron microscopy (HREM) images of the interface were obtained with a JEOL 4000EX electron microscope. The whisker geometry used for HREM imaging is described in Reference 2. High spatial resolution (< 2-nm-diameter probe) parallel-collection electron energy loss spectroscopy (PEELS) measurements were obtained with a Philips EM400T/FEG microscope equipped with a Gatan Model 666 spectrometer.

Burnup characteristic of CERMET and TRISO fuel particles used in Boiling Water Reactor with Pebble-Bed Coated Particles

2014 ◽  
Vol 2014 (1) ◽  
pp. 17-22
Author(s):  
Abdelfettah Benchrif ◽  
◽  
Abdelouahed Chetaine ◽  
Hamid Amsil ◽  
◽  
...  
Keyword(s):  
Boiling Water ◽  
Boiling Water Reactor ◽  
Pebble Bed ◽  
Water Reactor ◽  
Coated Particles ◽  
Triso Fuel ◽  
Fuel Particles

Measurement of kernel swelling and buffer densification in irradiated UCO and UO2 TRISO fuel particles from AGR-2

2019 ◽  
Author(s):  
John D Stempien ◽  
Mitchell A Plummer ◽  
Jason L Schulthess ◽  
Paul A Demkowicz
Keyword(s):  
Triso Fuel ◽  
Fuel Particles

scholarly journals Low-Cycle Fatigue Crack Initiation Simulation and Life Prediction of Powder Superalloy Considering Inclusion-Matrix Interface Debonding

Materials ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 4018
Author(s):  
Shuming Zhang ◽  
Yuanming Xu ◽  
Hao Fu ◽  
Yaowei Wen ◽  
Yibing Wang ◽  
...  
Keyword(s):  
Finite Element ◽  
Crack Initiation ◽  
Life Prediction ◽  
Damage Mechanics ◽  
Low Cycle Fatigue ◽  
Fatigue Crack Initiation ◽  
Fatigue Loading ◽  
Interface Debonding ◽  
Damage Evolution Equation ◽  
Finite Element Software

From the perspective of damage mechanics, the damage parameters were introduced as the characterizing quantity of the decrease in the mechanical properties of powder superalloy material FGH96 under fatigue loading. By deriving a damage evolution equation, a fatigue life prediction model of powder superalloy containing inclusions was constructed based on damage mechanics. The specimens containing elliptical subsurface inclusions and semielliptical surface inclusions were considered. The CONTA172 and TARGE169 elements of finite element software (ANSYS) were used to simulate the interfacial debonding between the inclusions and matrix, and the interface crack initiation life was calculated. Through finite element modeling, the stress field evolution during the interface debonding was traced by simulation. Finally, the effect of the position and shape size of inclusions on interface debonding was explored.

Sign in / Sign up

Export Citation Format

Share Document