Traditionally, farmers have delayed seeding to manage wild oat (Avena fatua L.) in tame oat (Avena sativa L.) crops, but this practice can adversely affect grain yield and quality. The objectives of this study were: (1) to evaluate the effectiveness of using high seeding rates with early-seeded oat to maintain grain yield and quality, and (2) to determine an optimum seeding rate to manage wild oat and maximize grain yield and quality. The factors of interest were wild oat density (low and high density), seeding date (early May, mid May, early June and mid June), and tame oat seeding rate (150, 250, 350 and 450 viable seeds m-2). The study was conducted at Indian Head and Saskatoon, SK, in 2002, 2003 and 2004, at Winnipeg, MB, in 2002, and at Morden, MB, in 2003 and 2004. Wild oat biomass, wild oat panicle density and wild oat seed in the harvested sample decreased as seeding rate increased, while tame oat biomass and grain yield increased. Wild oat density ranged between 0 and 100 plants m-2 with averages of 10 plants m-2 in the low density treatment and 27 plants m-2 in the high density treatment. At low seeding rates, grain yield decreased with increasing wild oat density. The difference in grain yield between the two wild oat densities decreased as the seeding rate increased. There was a curvilinear decrease in grain yield as seeding was delayed. A seeding date × seeding rate interaction was noted for test weight, plump seed, thin seed and groat yield. Seed quality improved as seeding rate increased for only the mid-June seeding date. Even though the mid-June test weight increased as the seeding rate increased it was always lower than the early May test weight at any seeding rate. The results from this study established that in the presence of wild oats, early seeding of tame oat is possible providing high seeding rates, 350 plants m-2 are used.Key words: Wild oat competition, wild oat density, wild oat biomass, grain yield, grain quality
Genome structural evolution in Brassica crops
