Synthesis of Dialkyl 2-(2-Oxo-2-phenylethyl)-3-(1,1,1-triphenyl-λ5-phosphanylidene)succinates from Triphenylphosphine, Acetylenic Ester and 4,4,4-Trifluoro-1-phenyl-1,3-butanedione in the Presence of Basic Alumina Powder

2008 ◽  
Vol 183 (5) ◽  
pp. 1116-1123 ◽  
Author(s):  
Ali Jafari ◽  
Ebrahim Ahmadi ◽  
Mokhtar Alinia ◽  
Ali Ramazani
Author(s):  
X. Zhang ◽  
Y. Pan ◽  
T.T. Meek

Industrial microwave heating technology has emerged as a new ceramic processing technique. The unique advantages of fast sintering, high density, and improved materials properties makes it superior in certain respects to other processing methods. This work presents the structure characterization of a microwave sintered ceramic matrix composite.Commercial α-alumina powder A-16 (Alcoa) is chosen as the matrix material, β-silicon carbide whiskers (Third Millennium Technologies, Inc.) are used as the reinforcing element. The green samples consisted of 90 vol% Al2O3 powder and 10 vol% ultrasonically-dispersed SiC whiskers. The powder mixture is blended together, and then uniaxially pressed into a cylindrical pellet under a pressure of 230 MPa, which yields a 52% green density. The sintering experiments are carried out using an industry microwave system (Gober, Model S6F) which generates microwave radiation at 2.45 GHz with a maximum output power of 6 kW. The composites are sintered at two different temperatures (1550°C and 1650°C) with various isothermal processing time intervals ranging from 10 to 20 min.


2020 ◽  
Vol 7 (2) ◽  
pp. 145-156
Author(s):  
Pravinkumar Patil ◽  
Gangadhar Bhopalkar ◽  
Sainath Zangade

Background: The various industrial processes have a diverse effect on the environment through pollution. In view of these observations, some environmentally benign synthetically protocols have developed under green chemistry. For rapid and sustainable synthesis, the microwave irradiation (MI) has gained popularity as a powerful tool compared to conventional synthesis. The present study describes the synthesis of novel substituted 1, 3-diaryl-2-propene-1-one derivative using alumina supported K3PO4-MWI combination. Objective: Chalcones are important compounds which are widely spread in nature like in fruits, vegetables, tea, spices, etc. The 2’-hydroxy derivative of chalcones plays an important role in the synthesis of bioactive compounds. The present communication deals with a convenient and rapid synthesis of 1, 3-diaryl-2-propene-1-one under the support of alumina-tripotassium phosphate and microwave irradiation. Our efforts are focused on the introduction of typical and easier route for the synthesis of title compounds using a microwave. All synthesized chalcones have been screened and evaluated for the antioxidant activity by DPPH and nitric oxide radical scavenging. Some of these compounds are found to be more potent scavengers and may lead to the development of a new class of antioxidants. Methods: The α, β-unsaturated carbonyl functionality contains two electrophilic centers allowing them to undergo addition and cyclization reactions with different nucleophiles. In the literature survey, we found that Chalcones were synthesized using tripotassium phosphate catalyst under refluxing by a conventional method. A novel method for the synthesis of 1, 3-diaryl-2-propene-1-one via Claisen Schmidt has been introduced by reacting substituted 2’- hydroxyl acetonaphthones with substituted aromatic aldehydes under the support of basic alumina –tripotassium phosphate via microwave radiations. Formation of corresponding Chalcones was confirmed by spectral studies followed by their screening for antioxidant activity. The scavenging activity is expressed in terms of % inhibition and IC50 value (μg/ml). Results: The structures of newly synthesized Chalcones were confirmed and in good agreement with obtained spectral analysis such as IR, NMR, Mass and elemental analysis. Commercially available basic alumina and tripotassium phosphate in combination of microwave were utilized and found to be effective, convenient route for the synthesis of 1, 3-diaryl-2-propene-1-one derivatives with desirable yields in short reaction time (5-12 min). The results of antioxidant activity revealed that the IC50 value for compounds 3a, 3d, 3e, 3f, 3g, 3h, 3j, 3l and 3n are lower than that of standard ascorbic acid to scavenge DPPH radical. This indicates that these compounds are more significant scavengers in comparison with standard drug. On the other hand, compounds 3a, 3b, 3c, 3d, 3g, 3l and 3n are more potent scavengers for NO free radical. Conclusion: We have introduced an efficient, ecofriendly, simple and fast microwave assisted method using basic alumina-tripotassium phosphate for the synthesis of 1, 3-diaryl-2-propene-1- one derivatives. Microwave irradiation provides an effective way for the preparation of Chalcones in terms of several advantages as a simple procedure, short reaction time, milder reaction condition, cleaner reaction and excellent yield. The scavenging activity of chalcones against DPPH and NO free radicals showed excellent properties of antioxidants.


Author(s):  
Kevin Florio ◽  
Dario Puccio ◽  
Giorgio Viganò ◽  
Stefan Pfeiffer ◽  
Fabrizio Verga ◽  
...  

AbstractPowder bed fusion (PBF) of ceramics is often limited because of the low absorptance of ceramic powders and lack of process understanding. These challenges have been addressed through a co-development of customized ceramic powders and laser process capabilities. The starting powder is made of a mix of pure alumina powder and alumina granules, to which a metal oxide dopant is added to increase absorptance. The performance of different granules and process parameters depends on a large number of influencing factors. In this study, two methods for characterizing and analyzing the PBF process are presented and used to assess which dopant is the most suitable for the process. The first method allows one to analyze the absorptance of the laser during the melting of a single track using an integrating sphere. The second one relies on in-situ video imaging using a high-speed camera and an external laser illumination. The absorption behavior of the laser power during the melting of both single tracks and full layers is proven to be a non-linear and extremely dynamic process. While for a single track, the manganese oxide doped powder delivers higher and more stable absorptance. When a full layer is analyzed, iron oxide-doped powder is leading to higher absorptance and a larger melt pool. Both dopants allow the generation of a stable melt-pool, which would be impossible with granules made of pure alumina. In addition, the present study sheds light on several phenomena related to powder and melt-pool dynamics, such as the change of melt-pool shape and dimension over time and powder denudation effects.


Author(s):  
Corson L. Cramer ◽  
Beth Armstrong ◽  
Artem A. Trofimov ◽  
Peter Wang ◽  
Derek Siddel ◽  
...  

2021 ◽  
Vol 11 ◽  
pp. 866-874 ◽  
Author(s):  
Milan Vukšić ◽  
Irena Žmak ◽  
Lidija Ćurković ◽  
Danko Ćorić ◽  
Petra Jenuš ◽  
...  

Materials ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4182
Author(s):  
Alan Wilmański ◽  
Magdalena Zarzecka-Napierała ◽  
Zbigniew Pędzich

This paper describes combusting loose powder beds of mixtures of aluminum metal powders and aluminum oxide powders with various grain sizes under various nitrogen pressure. The synthesis conditions required at least 20/80 weight ratio of aluminum metal powder to alumina powder in the mix to reach approximately 80 wt% of γ-AlON in the products. Finely ground fused white alumina with a mean grain size of 5 μm was sufficient to achieve results similar to very fine alumina with 0.3 μm grains. A lower nitrogen pressure of 1 MPa provided good results, allowing a less robust apparatus to be used. The salt-assisted combustion synthesis upon addition of 10 wt% of ammonium nitrite resulted in a slight increase in product yield and allowed lower aluminum metal powder content in mixes to be ignited. Increasing the charge mass five times resulted in a very similar γ-AlON yield, providing a promising technology for scaling up. Synthesis in loose powder beds could be utilized for effective production of relatively cheap and uniform AlON powder, which could be easily prepared for forming and sintering without intensive grounding and milling, which usually introduce serious contamination.


2004 ◽  
Vol 53 (9) ◽  
pp. 993-996 ◽  
Author(s):  
Taketoshi NAGAYASU ◽  
Hideo HAYASHI ◽  
Masataka HIRAIDE

Sign in / Sign up

Export Citation Format

Share Document