Wood quality of Khaya senegalensis trees from a multi-stratified agroforestry system established in an open ombrophilous forest zone

Author(s):  
Adriano Reis Prazeres Mascarenhas ◽  
Marta Silvana Volpato Sccoti ◽  
Rafael Rodolfo de Melo ◽  
Fernando Luiz de Oliveira Corrêa ◽  
Emanuel Fernando Maia de Souza ◽  
...  
CERNE ◽  
2017 ◽  
Vol 23 (3) ◽  
pp. 291-297
Author(s):  
Walter Torezani Neto Boschetti ◽  
Juarez Benigno Paes ◽  
Graziela Baptista Vidaurre ◽  
Marina Donária Chaves Arantes ◽  
João Gabriel Missia da Silva

ABSTRACT This study aims to evaluate the quality of normal, tension and opposite wood of eucalyptus trees lengthwise, in straight and inclined stems, affected by wind action. It also aims to explain the pulping parameters resultant from the quality of the wood. The trees were grouped into four tilt ranges, ranging from 0 to 50º, and the basic density, chemical composition of the wood, and performance in kraft pulping were assessed. Normal and tension wood had similar basic densities; while for opposite wood, the density was lower, being responsible for a decrease in reaction wood density. The chemical composition of the wood was influenced by the presence of reaction wood in the stem. Tension and opposite wood showed lower levels of extractives and lignin and higher holocellulose content when compared to normal wood, with favorable wood quality for pulping. The increase in holocellulose content and the reduction of lignin and extractives content contributed positively to a more delignified pulp and reduction of the Kappa number. However, after cooking the reaction wood under the same conditions as those of normal wood, reaction wood pulping tends to have a lower screen yields. Due to differences in basic density and chemical constituents between opposite and normal wood, it is recommended not to designate the opposite wood as normal wood.


2019 ◽  
Vol 20 (8) ◽  
Author(s):  
Nurul Chaerani ◽  
DEDE J SUDRAJAT ◽  
ISKANDAR Z SIREGAR ◽  
ULFAH J SIREGAR

Abstract. Chaerani N, Sudrajat DJ, Siregar IZ, Siregar UJ. 2019. Growth performance and wood quality of white jabon (Neolamarckia cadamba) progeny testing at Parung Panjang, Bogor, Indonesia. Biodiversitas 20: 2295-2301. The aim of this study was to evaluate the genetic parameters of growth and wood quality in white jabon progeny test at 54 months old in Parung Panjang, Bogor. The 105 half-sib families obtained from 12 provenances were evaluated in a randomized complete block design with five replications. Wood quality was assessed both in a non-destructive way using a pilodyn and by destructive method using wood sample taker. Results indicated that the mean value ranged from 5.10 to 10.15 m for height, 6.67 to 15.30 cm for diameter, 2.30 to 3.62 cm for pilodyn penetration, 0.66 to 0.82 g/cm3 for wood density, 0.33 to 0.50 for specific gravity, and 66 to 111 % for moisture content, respectively. There were significant differences among 105 families for all traits except moisture content. The high heritability estimate was found for height (0.4-0.69) and basic density (0.27-0.59). Applying 80% selection intensity on diameter and leaving 84 best families in each block will produce a high total genetic gain. Pilodyn penetration had negative correlation with diameter, wood density, and specific gravity.


2020 ◽  
Vol 20 (4) ◽  
Author(s):  
Lara Comar Riva ◽  
Marcela Aparecida de Moraes ◽  
José Cambuim ◽  
Daniele Fernanda Zulian ◽  
Luciane Missae Sato ◽  
...  

1995 ◽  
Vol 71 (4) ◽  
pp. 473-478
Author(s):  
Y. H. Chui

Norway spruce [Picea abies (L.) Karst.] is one of the major non-native softwood species in the Maritimes. A project was undertaken to evaluate the grade yields and mechanical properties of Norway spruce. The project also provided comparative information on the wood quality of two Norway spruce provenances from Germany and Poland. Four plantations were selected for the study with two of these plantations containing trees of known provenances. One plantation was mature and the other three were juvenile. In total, 530 pieces of lumber and the same number of matched small clear specimens were tested for bending properties. Prior to testing, the lumber was visually graded according to both British and Canadian specifications. Quality of lumber varied significantly between sites. Lumber from the Polish provenance had slightly better mechanical properties than that from trees of the German provenance. Compared with published information, the plantation-grown Norway spruce had lower clear wood bending properties and specific gravity than primary eastern Canadian spruce species and balsam fir, and natural Norway spruce grown in Europe. Key words: Norway spruce [Picea abies (L.) Karst.], wood quality, bending properties, grade yield


1970 ◽  
Vol 29 (4) ◽  
pp. 483-496
Author(s):  
N.J. Anyanwu ◽  
O.S. Onifade ◽  
J.A. Olanite ◽  
V.I.O. Olowe ◽  
B.O. Boukar ◽  
...  

The availability of high quality forage, especially during the dry season remains a major challenge to ruminant livestock production in Nigeria and many parts of West Africa. This study was conducted to evaluate forage yield and nutritive quality of haulm from selected dual purpose cowpea (Vigna unguiculata L. Walp.) cultivars in the humid rain forest zone of Nigeria. The forage and pod yields of twenty cultivars were evaluated at the Teaching and Research Farm of the Federal University of Technology, Owerri, Imo State, Nigeria. Subsequently, five dual-purpose cultivars, namely IT04K-334-2, IT07K-293-3, IT04K-194-3, IT04K-405-5, IT06K-147-2, were selected based on forage and pod yields from previous trial, for determination of chemical and fibre compositions. The results revealed significant (P<0.05) differences in pod and forage yields among the twenty cowpea cultivars, with yields ranging from 0-1.5 t ha-1 and 0.1-4.5 t ha-1 for pod and forage, respectively. Cultivars IT07K-293-3, IT04K-405-5, IT06K-147-2, IT07K-194-3, IT04K-334-2, IT04K-267-8 and IT04K-339-1 recorded the highest fodder yields of at least 2715 t ha-1, with crude protein contents ranging from 10.49% in IT07K-194-3 to 13 .57 % in IT04K-405-5. Cultivars IT07K-194-3, IT07K-293-3, IT07K-220-1-9, IT06K-147-2, IT07K-187-55IT04K-332-1 recorded the highest pod yields (>700 t ha-1). There were significant (P<0.05) differences in crude protein, ether extract and non-fibre carbohydrates (NFC) contents among five cultivars selected from the top ten high yielding cultivars, based on mean ranking score. These selected cultivars are recommended as dual-purpose cowpea for the humid forest zone.


Author(s):  
Janice K. Wiedenbeck ◽  
Eini Lowell
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document