Synthesis and Physico-Chemical Properties of 2-Morpholino-4,6-Dichloro-S-Triazine with Various Aromatic Diols

1996 ◽  
Vol 8 (2) ◽  
pp. 265-273 ◽  
Author(s):  
K C Patel ◽  
S N Kaula ◽  
P S Patel
Keyword(s):  
Thermal Stability ◽  
Thermogravimetric Analysis ◽  
Ir Spectra ◽  
Chlorinated Solvents ◽  
Chemical Properties ◽  
Interfacial Polycondensation ◽  
Viscosity Measurements ◽  
Physico Chemical ◽  
Thermal Stability Of

Several homopolycyanurates were synthesized by stirred interfacial polycondensation of 2-morpholino-4,6-dichloro- s-triazine with various aromatic diols such as 1,5- dihydroxynaphthalene,(DHN-1,5),1,7-dihydroxynapthalene(DHN-1,7),2,7-dihydroxynapthalene resorcinol (R), catechol (C), hydroquinone (H) and phenolphthalein (Ph). They were characterized by density, viscosity measurements, IR spectra, solubility tests and thermogravimetric analysis. The polymer had reduced viscosities in the range 0.468 to 0.829 dl g−1 in chromoform at 30 °C. All the polymers were amorphous and soluble in chlorinated solvents. The thermal stability of polycyanurates decreases in the following matter: PCDHN-1,5 > PCDHN-1,7 > PCPh > PCR ≃ PCDHN-2,7 > PCHQ > PCC.

Synthesis and Physico-Chemical Properties of Polycyanurates of 2-(N,N-Diphenylhydrazino)4,6-Dichloro-s-Triazine with Various Aromatic Diols

1993 ◽  
Vol 5 (4) ◽  
pp. 307-316 ◽  
Author(s):  
B S Bhonsale ◽  
S N Kaula ◽  
B V Patel ◽  
K C Patel
Keyword(s):  
Thermal Stability ◽  
Chlorinated Solvents ◽  
Chemical Properties ◽  
Interfacial Polycondensation ◽  
Bisphenol S ◽  
Reaction Conditions ◽  
Reduced Viscosity ◽  
Physico Chemical ◽  
Optimum Reaction ◽  
Thermal Stability Of

Various polycynaurates were synhesised by stirred interfacial polycondensation of 2-(N.N-diphenynhydrazino)-4,6-dichloro-s-triaziae (DPHDCT) with each of the aromatic diols: bisphenol-A (BPA); bisphenol-C (BPC); bisphenol-S (BPS); phenolphthalein (Ph); catechol; resorcinol; 1,5and 2.7-dihydroxynaphthalene (DHN-1,5 and DHN-2,7) and 1,8-dihydroxyanthraquinone (DHA-1,8). Interfacial polycondensation of DPHDCT with BPA was investigated in detail in order to select optimum reaction conditions. The yield of polycyanurates varies from 6 I% to 79%. The polycyanurates are soluble in chlorinated solvents such as chloroform, dichloroethane. dichloromethane and chlorobenzene. The reduced viscosity for polycyanurates, determined with a 1 g disolution in chloroform at 25 + 3°C was found to be in the range 0.50-0.68 dl g. All the polycyanurates were characterized by IR spectra. The densities of the polycyanurates, determined using the suspension method at 25 3°C, range between 1.196 and 1.330 g cm. The overall reactivity of diols, based on reduced viscosity values, was found to decrease in the following order: PCBPA> PCPh> PCBPC> PCR>PCDHN-2,7 > PCDHN-I,5 > PCC > PCDHA-1.8 > PCBPS. The thermal stability of polycyanurates, derived from various temperature characteristics, was found to decrease in the following order: PCBPA> PCBPS> PCBPC > PCC PCR> PCDHN-2,7 PCDHN-.l 5 > PCDHA-1,8 > PCPh.

Effect of Phenylene Diamine Antioxidant on Physico-Chemical Properties of Methyl Grafted Natural Rubber Polymer Electrolytes

2017 ◽  
Vol 864 ◽  
pp. 48-53
Author(s):  
Ahmad Fairoz Aziz ◽  
Khuzaimah Nazir ◽  
S.F. Ayub ◽  
N.I. Adam ◽  
Muhd Zu Azhan Yahya ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Natural Rubber ◽  
Polymer Electrolytes ◽  
Chemical Properties ◽  
Physico Chemical ◽  
Solution Cast ◽  
Deconvolution Techniques ◽  
Tga And Dsc ◽  
Thermal Stability Of ◽  
Aging Factor

0.5 wt.% of N-(1,3-dimethylbutyl)-N’-phenyl-p-phenylenediamine (6PPD) was introduced into polymer electrolytes based on 30% poly(methyl-methacrylate) grafted natural rubber (MG30) in order to reduce the aging factor of MG30. The polymer electrolyte without 6PPD was used as control. All samples were prepared by using solution cast techniques. The effect of 6PPD in the electrolytes was analysed by using TGA, DSC and FTIR. TGA and DSC results revealed the thermal stability of MG30 electrolytes with 6PPD have higher thermal stability but lower glass transition temperature value. FTIR studies confirmed the existence of LiTF in the sample and prove the occurrence of polymer-salt complexation. Deconvolution techniques analysis on FTIR spectra shows the electrolyte sample with 6PPD display more ion dissociation which reflects to higher ionic conductivity.

scholarly journals Features of the Structure and Physical-Chemical Properties of Poly-Ortho-Toluidine Doped with Toluenesulfonic Acid

2019 ◽  
Vol 20 (1) ◽  
pp. 77-82
Author(s):  
A.L. Stepura ◽  
O.I. Aksimentyeva ◽  
P.Yu. Demchenko
Keyword(s):  
Crystal Structure ◽  
Thermal Stability ◽  
Electrical Conductivity ◽  
Specific Resistance ◽  
Oxidative Polymerization ◽  
Chemical Properties ◽  
Conductivity Activation Energy ◽  
Physical Chemical ◽  
Physico Chemical ◽  
Thermal Stability Of

Features of crystal structure, electrical conductivity and thermal stability of poly-ortho-toluidine (PoTi) samples, obtained with method of oxidative polymerization in the environment of sulfuric and toluenesulfonic acids (TSA), were investigated. It was discovered that PoTi-TSA samples are characterized withhigh crystallinity. According to the physico-chemical analysis, doping samples with TSA causes increase of PoTi thermal stability, electrical conductivity and sensor sensitivity on the contrary to samples doped with sulfuric acid. Based on temperature dependence of specific resistance, were calculated the values of the conductivity activation energy, which are within the limits of 0.2-0.4 eV depending on the type of dopant.

Physico-chemical properties and thermal stability of microcrystalline cellulose isolated from Alfa fibres

2014 ◽  
Vol 104 ◽  
pp. 223-230 ◽  
Author(s):  
Djalal Trache ◽  
André Donnot ◽  
Kamel Khimeche ◽  
Riad Benelmir ◽  
Nicolas Brosse
Keyword(s):  
Thermal Stability ◽  
Microcrystalline Cellulose ◽  
Chemical Properties ◽  
Physico Chemical ◽  
Thermal Stability Of

Investigation of 1,2,3-trialkylimidazolium ionic liquids: experiment and density functional theory calculations

2017 ◽  
Vol 41 (2) ◽  
pp. 650-660 ◽  
Author(s):  
Snežana Papović ◽  
Milan Vraneš ◽  
Stevan Armaković ◽  
Sanja J. Armaković ◽  
Katalin Mészáros Szécsényi ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Density Functional Theory ◽  
Ionic Liquids ◽  
Thermogravimetric Analysis ◽  
Density Functional ◽  
Chemical Properties ◽  
Density Functional Theory Calculations ◽  
Functional Theory ◽  
Density Measurements ◽  
Physico Chemical

Physico-chemical properties, thermal stability and bonding in 1,2,3-trialkylimidazolium based ionic liquids (ILs) were investigated by viscosity and density measurements together with thermogravimetric analysis (TGA) and IR spectroscopy.

Thermal Stability of N-Heterocycle-Stabilized Iodanes – A Systematic Investigation

2019 ◽  
Author(s):  
Andreas Boelke ◽  
Yulia A. Vlasenko ◽  
Mekhman S. Yusubov ◽  
Boris Nachtsheim ◽  
Pavel Postnikov
Keyword(s):  
Thermal Stability ◽  
Differential Scanning Calorimetry ◽  
Thermogravimetric Analysis ◽  
Systematic Investigation ◽  
Scanning Calorimetry ◽  
Thermal Stability Of

<p>The thermal stability of pseudocyclic and cyclic <i>N</i>-heterocycle-stabilized (hydroxy)aryl- and mesityl(aryl)-l<sup>3</sup>-iodanes (NHIs) through thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) is investigated. NHIs bearing <i>N</i>-heterocycles with a high N/C-ratio such as triazoles show among the lowest descomposition temperatures and the highest decomposition energies. A comparison of NHIs with known (pseudo)cyclic benziodoxolones is made and we further correlated their thermal stability with reactivity in a model oxygenation. </p>

Organic solvent-free synthesis of phosphorus-containing polymers

2007 ◽  
Vol 79 (11) ◽  
pp. 1879-1884 ◽  
Author(s):  
Smaranda Iliescu ◽  
Gheorghe Ilia ◽  
Aurelia Pascariu ◽  
Adriana Popa ◽  
Nicoleta Plesu
Keyword(s):  
Thermal Stability ◽  
Thermal Analysis ◽  
Bisphenol A ◽  
Organic Solvent ◽  
Molar Mass ◽  
Interfacial Polycondensation ◽  
H Nmr ◽  
Phosphorus Containing ◽  
Solvent Free Synthesis ◽  
Thermal Stability Of

Direct, efficient, organic solvent- and catalyst-free synthesis of a series of polyphosphates was accomplished. The reaction involved a gas-liquid interfacial polycondensation between arylphosphoric dichlorides and bisphenol A. The polyphosphates were characterized by IR, 1H NMR, 31P NMR, inherent viscosity, thermal analysis, and molar mass. Yields in the range 70-90 % and inherent viscosities in the range 0.30-0.40 dl/g were obtained. The thermal stability of the polyphosphates was investigated by using thermogravimetry.

Study of Thermal Behaviour of EPDM/SBR Blends and Carbon Nanocoatings Deposited by Sputtering

2021 ◽  
Vol 875 ◽  
pp. 116-120
Author(s):  
Muhammad Alamgir ◽  
Faizan Ali Ghauri ◽  
Waheed Qamar Khan ◽  
Sajawal Rasheed ◽  
Muhammad Sarfraz Nawaz ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Weight Loss ◽  
Thermogravimetric Analysis ◽  
Thermal Behavior ◽  
Thermal Behaviour ◽  
X Ray Diffraction ◽  
X Ray ◽  
Thermal Stability Of

In this study, the effect of SBR concentration (10 Phr, 20 Phr & 30 Phr ) on the thermal behavior of EPDM/SBR blends was studied. Thermogravimetric analysis (TGA) was used to check weight loss of samples as function of temperature by heating upto 600°C. X-ray diffraction (XRD) was performed to determine quality and % crystallinity of the elastomer blends. It was seen that % crystallinity improved with an increase in the content of SBR in EPDM/SBR blends. TGA revealed that the thermal stability of EPDM/SBR blends has improved by 17% than neat EPDM. Carbon nano-coatings produced by sputtering have no beneficial influence on thermal behaviour of elastomers.

Sign in / Sign up

Export Citation Format

Share Document