Analytical approximation of the erosion rate and electrode wear in micro electrical discharge machining

2008 ◽  
Vol 18 (8) ◽  
pp. 085011 ◽  
Author(s):  
W Kurnia ◽  
P C Tan ◽  
S H Yeo ◽  
M Wong
Keyword(s):  
Electrical Discharge ◽  
Erosion Rate ◽  
Electrical Discharge Machining ◽  
Analytical Approximation ◽  
Electrode Wear ◽  
Micro Electrical Discharge Machining

Recent Patents on Micro-EDM Milling

2020 ◽  
Vol 13 (3) ◽  
pp. 219-229
Author(s):  
Baocheng Xie ◽  
Jianguo Liu ◽  
Yongqiu Chen
Keyword(s):  
Electrical Discharge ◽  
Electrical Discharge Machining ◽  
Three Dimensional ◽  
Processing Method ◽  
Electrode Wear ◽  
Micro Edm ◽  
Processing Efficiency ◽  
Processing Methods ◽  
Machining Quality ◽  
Micro Electrical Discharge Machining

Background: Micro-Electrical Discharge Machining (EDM) milling is widely used in the processing of complex cavities and micro-three-dimensional structures, which is a more effective processing method for micro-precision parts. Thus, more attention has been paid on the micro-EDM milling. Objective : To meet the increasing requirement of machining quality and machining efficiency of micro- EDM milling, the processing devices and processing methods of micro-EDM milling are being improved continuously. Methods: This paper reviews various current representative patents related to the processing devices and processing methods of micro-EDM milling. Results: Through summarizing a large number of patents about processing devices and processing methods of micro-EDM milling, the main problems of current development, such as the strategy of electrode wear compensation and the development trends of processing devices and processing methods of micro-EDM milling are discussed. Conclusion: The optimization of processing devices and processing methods of micro-EDM milling are conducive to solving the problems of processing efficiency and quality. More relevant patents will be invented in the future.

Comparative Analysis of the Process Mechanics in Micro-Electrical Discharge Machining (EDM) and Reverse Micro-EDM

2011 ◽  
Author(s):  
Sachin Mastud ◽  
Ramesh K. Singh ◽  
Johnson Samuel ◽  
Suhas S. Joshi
Keyword(s):  
Surface Roughness ◽  
Electrical Discharge ◽  
Erosion Rate ◽  
Electrical Discharge Machining ◽  
Process Analysis ◽  
System Parameters ◽  
Erosion Rates ◽  
Micro Electrical Discharge Machining ◽  
Material Erosion ◽  
Process Mechanics

The objective of this paper is to study the time-evolution of the process mechanics for micro-electrical discharge machining (MEDM) and reverse-micro-electrical discharge machining (R-MEDM), as a function of key system parameters, viz., voltage, capacitance, and threshold of the spark circuit. Full factorial experiments have been performed to quantify the aforementioned system parameters on the MEDM and R-MEDM processes. The process monitoring voltage and current signals, material erosion rate and the surface roughness values are the machining responses of interest. The voltage and current (V-I) signals reveal information about the material erosion rate and the extent of debris-interference associated with the corresponding process. Analysis of the V-I signals shows that R-MEDM is more stable than MEDM and can therefore be operated at aggressive conditions of capacitance and voltage. R-MEDM also results in higher material erosion rates but the resulting surface has a higher surface roughness value than that generated by MEDM. A debris deposition mechanism is proposed for R-MEDM that suggests debris entrapment and subsequent welding to the machined feature to be the reason for the increased surface roughness.

scholarly journals Technical Model of Micro Electrical Discharge Machining (EDM) Milling Suitable for Bottom Grooved Micromixer Design Optimization

Micromachines ◽  
2020 ◽  
Vol 11 (6) ◽  
pp. 594 ◽  
Author(s):  
Izidor Sabotin ◽  
Gianluca Tristo ◽  
Joško Valentinčič
Keyword(s):  
Design Optimization ◽  
Electrical Discharge ◽  
Electrical Discharge Machining ◽  
Removal Rate ◽  
Electrode Wear ◽  
Micro Edm ◽  
Efficient Design ◽  
Machining Time ◽  
Micro Electrical Discharge Machining ◽  
Technical Model

In this paper, development of a technical model of micro Electrical Discharge Machining in milling configuration (EDM milling) is presented. The input to the model is a parametrically presented feature geometry and the output is a feature machining time. To model key factors influencing feature machining time, an experimental campaign by machining various microgrooves into corrosive resistant steel was executed. The following parameters were investigated: electrode dressing time, material removal rate, electrode wear, electrode wear control time and machining strategy. The technology data and knowledge base were constructed using data obtained experimentally. The model is applicable for groove-like features, commonly applied in bottom grooved micromixers (BGMs), with widths from 40 to 120 µm and depths up to 100 µm. The optimization of a BGM geometry is presented as a case study of the model usage. The mixing performances of various micromixer designs, compliant with micro EDM milling technology, were evaluated using computational fluid dynamics modelling. The results show that slanted groove micromixer is a favourable design to be implemented when micro EDM milling technology is applied. The presented technical model provides an efficient design optimization tool and, thus, aims to be used by a microfluidic design engineer.

A Simulation Study on Rod Electrode Wear in Micro-EDM

2012 ◽  
Vol 472-475 ◽  
pp. 2426-2429 ◽  
Author(s):  
Hu Wang ◽  
Yuan Gang Wang ◽  
Meng Hua Wu ◽  
Xiao Peng Li ◽  
Yu Liu
Keyword(s):  
Adverse Effect ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Electrical Discharge ◽  
Skin Effect ◽  
Electrical Discharge Machining ◽  
Electrode Wear ◽  
Micro Edm ◽  
Element Analysis ◽  
Micro Electrical Discharge Machining

Electrode wear has a great adverse effect on the accuracy of Micro Electrical Discharge Machining (Micro-EDM) and impedes the improvement of Micro-EDM. In this study the distribution of electric field and current density was analyzed exhaustively in order to explore the generating mechanisms of rod electrode wear by finite element analysis and experiment. Experimental results indicated that corner wear occurred first, followed by side wear resulted from skin effect and debris in Micro-EDM, which was significant in enhancing the accuracy of machining.

Optimization of μEDM process assisted with rotating magnetic pulling force and ultrasonic vibration

2021 ◽  
pp. 095440892098440
Author(s):  
Gurpreet Singh ◽  
DR Prajapati ◽  
PS Satsangi
Keyword(s):  
Ultrasonic Vibration ◽  
Material Removal Rate ◽  
Electrical Discharge ◽  
Material Removal ◽  
Electrical Discharge Machining ◽  
Removal Rate ◽  
Machining Process ◽  
Micro Electrical Discharge Machining ◽  
Pulling Force ◽  
Tool Rotation

The micro-electrical discharge machining process is hindered by low material removal rate and low surface quality, which bound its capability. The assistance of ultrasonic vibration and magnetic pulling force in micro-electrical discharge machining helps to overcome this limitation and increase the stability of the machining process. In the present research, an attempt has been made on Taguchi based GRA optimization for µEDM assisted with ultrasonic vibration and magnetic pulling force while µEDM of SKD-5 die steel with the tubular copper electrode. The process parameters such as ultrasonic vibration, magnetic pulling force, tool rotation, energy and feed rate have been chosen as process variables. Material removal rate and taper of the feature have been selected as response measures. From the experimental study, it has been found that response output measures have been significantly improved by 18% as compared to non assisted µEDM. The best optimal combination of input parameters for improved performance measures were recorded as machining with ultrasonic vibration (U1), 0.25 kgf of magnetic pulling force (M1), 600 rpm of tool rotation (R2), 3.38 mJ of energy (E3) and 1.5 mm/min of Tool feed rate (F3). The confirmation trail was also carried out for the validation of the results attained by Grey Relational Analysis and confirmed that there is a substantial improvement with both assistance applied simultaneously.

Micro electrical discharge machining in nitrogen plasma jet

2018 ◽  
Vol 51 ◽  
pp. 198-207 ◽  
Author(s):  
Rimao Zou ◽  
Zuyuan Yu ◽  
Chengyang Yan ◽  
Jianzhong Li ◽  
Xin Liu ◽  
...  
Keyword(s):  
Electrical Discharge ◽  
Electrical Discharge Machining ◽  
Plasma Jet ◽  
Nitrogen Plasma ◽  
Micro Electrical Discharge Machining

A Magnetic Drive Actuator for Micro Electrical Discharge Machining

2012 ◽  
Vol 591-593 ◽  
pp. 303-306
Author(s):  
Xiao You Zhang ◽  
Akio Kifuji ◽  
Dong Jue He
Keyword(s):  
Electrical Discharge ◽  
High Speed ◽  
Degrees Of Freedom ◽  
Electrical Discharge Machining ◽  
Magnetic Coupling ◽  
Magnetic Bearings ◽  
Coupling Mechanism ◽  
Micro Electrical Discharge Machining ◽  
Long Stroke ◽  
Magnetic Drive

Electrical discharge machining has the capability of machining all conductive materials regardless of hardness, and has the ability to deal with complex shapes. However, the speed and accuracy of conventional EDM are limited by probability and efficiency of the electrical discharges. This paper describes a three degrees of freedom (3-DOF) controlled, wide-bandwidth, high-precision, long-stroke magnetic drive actuator. The actuator can be attached to conventional electrical discharge machines to realize a high-speed and high-accuracy EDM. The actuator primarily consists of thrust and radial magnetic bearings, thrust and radial air bearings and a magnetic coupling mechanism. By using the thrust and radial magnetic bearings, the translational motions of the spindle can be controlled. The magnetic drive actuator possesses a positioning resolution of the order of micrometer, a bandwidth greater than 100Hz and a positioning stroke of 2mm.

Sign in / Sign up

Export Citation Format

Share Document