Thermal Radiation Superimposed Hazard Analysis of Elevated Flare under Accident Condition

The food safety security (FSS) concept is perceived as an early warning system for minimizing food safety (FS) breaches, and it functions in conjunction with existing FS measures. Essentially, the function of FS and FSS measures can be visualized in two parts: (i) the FS preventive measures as actions taken at the stem level, and (ii) the FSS interventions as actions taken at the root level, to enhance the impact of the implemented safety steps. In practice, along with FS, FSS also draws its support from (i) legislative directives and regulatory measures for enforcing verifiable, timely, and effective compliance; (ii) measurement systems in place for sustained quality assurance; and (iii) shared responsibility to ensure cohesion among all the stakeholders namely, policy makers, regulators, food producers, processors and distributors, and consumers. However, the functional framework of FSS differs from that of FS by way of: (i) retooling the vulnerable segments of the preventive features of existing FS measures; (ii) fine-tuning response systems to efficiently preempt the FS breaches; (iii) building a long-term nutrient and toxicant surveillance network based on validated measurement systems functioning in real time; (iv) focusing on crisp, clear, and correct communication that resonates among all the stakeholders; and (v) developing inter-disciplinary human resources to meet ever-increasing FS challenges. Important determinants of FSS include: (i) strengthening international dialogue for refining regulatory reforms and addressing emerging risks; (ii) developing innovative and strategic action points for intervention {in addition to Hazard Analysis and Critical Control Points (HACCP) procedures]; and (iii) introducing additional science-based tools such as metrology-based measurement systems.

Download Full-text

Characterizing the convective heat exchange with plastic shading nets under natural arid conditions

International Journal of Energy Technology ◽

10.32438//ijet.11415 ◽

2019 ◽

pp. 11-20

Author(s):

Ahmed M Abdel-Ghanya ◽

Ibrahim M Al-Helal

Keyword(s):

Wind Speed ◽

Thermal Radiation ◽

Convective Heat ◽

Convective Heat Transfer Coefficient ◽

Convective Heat Exchange ◽

Radiative Properties ◽

Wooden Frame ◽

Arid Conditions ◽

Air Temperatures ◽

Radiation Fluxes

Plastic nets are extensively used for shading purposes in arid regions such as in the Arabian Peninsula. Quantifying the convection exchange with shading net and understanding the mechanisms (free, mixed and forced) of convection are essential for analyzing energy exchange with shading nets. Unlike solar and thermal radiation, the convective energy, convective heat transfer coefficient and the nature of convection have never been theoretically estimated or experimentally measured for plastic nets under arid conditions. In this study, the convected heat exchanges with different plastic nets were quantified based on an energy balance applied to the nets under outdoor natural conditions. Therefore, each net was tacked onto a wooden frame, fixed horizontally at 1.5-m height over the floor. The downward and upward solar and thermal radiation fluxes were measured below and above each net on sunny days; also the wind speed over the net, and the net and air temperatures were measured, simultaneously. Nets with different porosities, colors and texture structures were used for the study. The short and long wave’s radiative properties of the nets were pre-determined in previous studies to be used. Re and Gr numbers were determined and used to characterize the convection mechanism over each net. The results showed that forced and mixed convection are the dominant modes existing over the nets during most of the day and night times. The nature of convection over nets depends mainly on the wind speed, net-air temperature difference and texture shape of the net rather than its color and its porosity.

Download Full-text

PEMETAAN DAERAH RENTAN GEMPA BUMI SEBAGAI DASAR PERENCANAAN TATA RUANG DAN WILAYAH DI PROVINSI SULAWESI BARAT

KURVATEK ◽

10.33579/krvtk.v1i2.417 ◽

2017 ◽

Vol 1 (2) ◽

pp. 41-47

Author(s):

Marinda noor Eva

Keyword(s):

Seismic Hazard ◽

Hazard Analysis ◽

Probabilistic Seismic Hazard Analysis ◽

Seismic Hazard Analysis ◽

Probabilistic Seismic Hazard

Penelitian mengenai daerah rawan gempa bumi ini menggunakan Metode Probabilistic Seismic Hazard Analysis (PSHA) di Provinsi Sulawesi Barat, dengan tujuan untuk memetakan tingkat kerawanan bahaya gempa bumi di Kabupaten Mamasa. Penelitian ini menggunakan data kejadian gempa bumi di Pulau Sulawesi dan sekitarnya dari tahun 1900 – 2015. Hasil pengolahan PSHA menggunakan Software Ez-Frisk 7.52 yang menghasilkan nilai hazard di batuan dasar pada kondisi PGA (T = 0,0 sekon), dengan periode ulang 500 tahun dan 2500 tahun berkisar antara (149,54 – 439,45) gal dan (287,18 – 762,81) gal. Nilai hazard di batuan dasar dengan kondisi spektra T = 0,2 sekon untuk periode ulang 500 tahun dan 2500 tahun adalah (307,04 – 1010,90) gal dan (569,48 – 1849,78) gal. Nilai hazard di batuan dasar dengan kondisi spektra T = 1,0 sekon untuk periode ulang 500 tahun dan 2500 tahun diperoleh nilai (118,01 – 265,75) gal dan (223,74 – 510,92) gal. Berdasarkan analisis PSHA, nilai PGA di Provinsi Sulawesi Barat dominan dipengaruhi oleh sumber gempa sesar.

Download Full-text