scholarly journals Research on the Influence of Non-Conductor on the Weight Function of Electromagnetic Flowmeter

2021 ◽  
Vol 1952 (3) ◽  
pp. 032081
Author(s):  
Xuejing Li ◽  
Lijun Sun
Sensors ◽  
2020 ◽  
Vol 20 (5) ◽  
pp. 1431 ◽  
Author(s):  
Yulin Jiang

The electromagnetic flowmeter is usually used for single-phase fluid parameter measurement. When the measured fluid is gas-liquid two-phase flow, the geometry of the sensor measurement space will change with the movement of the gas, which will cause measurement errors. The weight function distribution is an important parameter to analyze such measurement errors. The traditional method for calculating the weight function of gas-liquid two-phase flow involves complex dimensional space transformation, which is difficult to understand and apply. This paper presents a new method for calculating the weight function of the gas-liquid two-phase flow electromagnetic flowmeter. Firstly, based on the measurement principle of the electromagnetic flowmeter, a general model of weight function of the gas-liquid two-phase flow electromagnetic flowmeter is built. Secondly, the bubbles in the fluid are regarded as the “isolated” points in the flow field. According to the physical connection between the “field” of the measured fluid and the “source” of the sensor electrode, the Green’s function expression based on gas-liquid two-phase flow is established. Then, combined with the boundary conditions of the measurement space of the electromagnetic flowmeter, the Green’s function is analyzed. Finally, the general model of weight function is solved by using the expression of Green’s function, then the expression of the weight function of the electromagnetic flowmeter is obtained when the measured fluid is hybrid gas-liquid two-phase flow. The simulation results show that the proposed method can reasonably describe the influence of the gas in the measured fluid on the output signal of the sensor, and the experimental results also indirectly prove the rationality of this method.


2012 ◽  
Vol 550-553 ◽  
pp. 3395-3399 ◽  
Author(s):  
Kai Xia Wei ◽  
Shu Long Gu ◽  
Long Qing He

The weight function method that uses a known weight function has been a general tool for the signal analysis of the electromagnetic flowmeter(EMF). However, it is difficult to solve the voltage equation directly by analytical method in order to get weight function for the partially filled pipe electromagnetic flowmeter(EMF-PF). The finite element numerical analysis method is tried to solve the weight function for the EMF-PF in this paper. The results show that weight function for EMF-PF relates to fill height of liquid in partially filled pipes, and there is a nonlinear function relationship between weight function for EMF-PF and fullness degree of liquid in the pipe.


2013 ◽  
Vol 712-715 ◽  
pp. 1856-1862
Author(s):  
Song Gao ◽  
Bin Li ◽  
Shi Yi Yin

Grounding electrode electromagnetic flowmeter can reduce the loss of the measurement signal,and the conductivity lower medium can be measured if the area of the grounding electrode was increased. However, if the grounding electrode area is increased, the measurement signal will be reduced. The weight function theory of electromagnetic flow meter shows that the reason is the distribution of electromagnetic flow meter weight functions is changed by the grounding electrode, lead to the induced electromotive force every point of media in the pipeline contribution to the measuring electrode is changed. the weight function of the electromagnetic flowmeter which possesses one or two grounding electrodes was analyzed respectively, get the law of electromagnetic flowmeter output signal decreases with the increase of the grounding electrode area. Finally, the relationship of the electromagnetic flowmeter output signal and the ground electrode diameter accounted for measuring the ratio of the pipe been demonstrated. This theory and method has a certain significance to research and development grounding electrode electromagnetic flowmeter.


2013 ◽  
Vol 444-445 ◽  
pp. 1360-1363
Author(s):  
Kai Xia Wei

Weight function is related with the sensor structure of electromagnetic flowmeter (EMF). Because of complex boundary conditions, it is difficult to solve the voltage differentiation equation of EMF directly to get weight function. The finite element numerical analysis method is tried to solve the weight function for the point and large-electrode EMF in this paper. The results prove it is feasible and efficient to obtain weight function of EMA by means of finite element numerical analysis.


2013 ◽  
Vol 712-715 ◽  
pp. 1904-1909 ◽  
Author(s):  
Shi Yi Yin ◽  
Bin Li

The methodology of the direct calibration for the electromagnetic flowmeter in partially filled pipes is presented in this paper. Based on the principle of the electromagnetic flowmeter, two main respects, including the flow liquid level and the weight function in partially filled pipes are introduced briefly, and the calibration technologies of the sensor, which consist of the device arrangements, the accurate measurement of the liquid level and the calibration of the flow discharge, are emphasized on, with the methodology based on the piecewise interpolation employed. The experimental results demonstrate that the methodology of the direct calibration is simple and effective for the real flow calibration of the electromagnetic flowmeter in partially filled pipes, with the stable measurement and the accuracy requirement satisfied.


2002 ◽  
Author(s):  
Shyhnan Liou ◽  
Chung-Ping Cheng
Keyword(s):  

2020 ◽  
Author(s):  
Anusha Ampavathi ◽  
Vijaya Saradhi T

UNSTRUCTURED Big data and its approaches are generally helpful for healthcare and biomedical sectors for predicting the disease. For trivial symptoms, the difficulty is to meet the doctors at any time in the hospital. Thus, big data provides essential data regarding the diseases on the basis of the patient’s symptoms. For several medical organizations, disease prediction is important for making the best feasible health care decisions. Conversely, the conventional medical care model offers input as structured that requires more accurate and consistent prediction. This paper is planned to develop the multi-disease prediction using the improvised deep learning concept. Here, the different datasets pertain to “Diabetes, Hepatitis, lung cancer, liver tumor, heart disease, Parkinson’s disease, and Alzheimer’s disease”, from the benchmark UCI repository is gathered for conducting the experiment. The proposed model involves three phases (a) Data normalization (b) Weighted normalized feature extraction, and (c) prediction. Initially, the dataset is normalized in order to make the attribute's range at a certain level. Further, weighted feature extraction is performed, in which a weight function is multiplied with each attribute value for making large scale deviation. Here, the weight function is optimized using the combination of two meta-heuristic algorithms termed as Jaya Algorithm-based Multi-Verse Optimization algorithm (JA-MVO). The optimally extracted features are subjected to the hybrid deep learning algorithms like “Deep Belief Network (DBN) and Recurrent Neural Network (RNN)”. As a modification to hybrid deep learning architecture, the weight of both DBN and RNN is optimized using the same hybrid optimization algorithm. Further, the comparative evaluation of the proposed prediction over the existing models certifies its effectiveness through various performance measures.


Sign in / Sign up

Export Citation Format

Share Document