scholarly journals Development of flow control methods in free and impinging jets

2021 ◽  
Vol 2119 (1) ◽  
pp. 012003
Author(s):  
A K Shevchenko ◽  
S N Yakovenko
Keyword(s):  
Velocity Profile ◽  
Flow Control ◽  
Stokes Equations ◽  
Flow Behavior ◽  
Impinging Jets ◽  
Navier Stokes ◽  
Control Methods ◽  
Navier Stokes Equations ◽  
Inlet Velocity

Abstract Submerged and impinging jets with harmonic perturbations added to the inlet velocity profile and with nozzle vibrations are simulated numerically at different Reynolds (Re) and Strouhal (St) numbers by solving the Navier–Stokes equations. The effects of Re, St and forcing amplitudes on flow behavior and jet splitting phenomena are studied.

scholarly journals Mixing of Particles in Micromixers under Different Angles and Velocities of the Incoming Water

Proceedings ◽  
2018 ◽  
Vol 2 (11) ◽  
pp. 577 ◽  
Author(s):  
Evangelos Karvelas ◽  
Christos Liosis ◽  
Theodoros Karakasidis ◽  
Ioannis Sarris
Keyword(s):  
Stokes Equations ◽  
Velocity Ratio ◽  
The Other ◽  
Navier Stokes ◽  
Contaminated Water ◽  
Solution Flow ◽  
Navier Stokes Equations ◽  
Inlet Velocity ◽  
Metal Capture ◽  
Discrete Motion

A possible solution for water purification from heavy metals is to capture them by using nanoparticles in microfluidic ducts. In this technique, heavy metal capture is achieved by effectively mixing two streams, a nanoparticle solution and the contaminated water. In the present work, particles and water mixing is numerically studied for various inlet velocity ratios and inflow angles of the two streams. The Navier-Stokes equations are solved for the water flow while the discrete motion of particles is evaluated by a Lagrangian method. Results showed that as the velocity ratio between the inlet streams increases, by increasing the particles solution flow, the mixing of particles with the contaminated water is increased. Thus, nanoparticles are more uniformly distributed in the duct. On the other hand, angle increase between the inflow streams ducts is found to be less significant.

scholarly journals Determining the Tangential Velocity profile of a Rotating Fluid in a Static Container using Navier–Stokes equations

2020 ◽  
Author(s):  
RAJDEEP TAH ◽  
SARBAJIT MAZUMDAR ◽  
Krishna Kant Parida
Keyword(s):  
Angular Velocity ◽  
Velocity Profile ◽  
Velocity Gradient ◽  
Stokes Equations ◽  
Tangential Velocity ◽  
Navier Stokes ◽  
Rotating Fluid ◽  
Navier Stokes Equations ◽  
Similar Principle ◽  
Tangential Velocity Profile

The shape of the liquid surface for a fluid present in a uniformly rotating cylinder is generally determined by making a Tangential velocity gradient along the radius of the rotating cylindrical container. A very similar principle can be applied if the direction of the produced velocity gradient is reversed, for which the source of rotation will be present at the central axis of the cylindrical vessel in which the liquid is present. Now if the described system is completely closed, the angular velocity will decrease as a function of time. But when the surface of the rotating fluid is kept free, then the Tangential velocity profile would be similar to that of the Taylor-Couette Flow, with a modification that; due to formation of a curvature at the surface, the Navier-Stokes law is to be modified. Now the final equation may not seem to have a proper general solution, but can be approximated to certain solvable expressions for specific cases of angular velocity.

scholarly journals 3D Hydrodynamic Modelling Enhances the Design of Tendaho Dam Spillway, Ethiopia

Water ◽  
2019 ◽  
Vol 11 (1) ◽  
pp. 82
Author(s):  
Getnet Kebede Demeke ◽  
Dereje Hailu Asfaw ◽  
Yilma Seleshi Shiferaw
Keyword(s):  
Stokes Equations ◽  
Flow Behavior ◽  
Fluid Flows ◽  
Three Dimensions ◽  
Navier Stokes ◽  
Hydraulic Structures ◽  
Hydrodynamic Modelling ◽  
Navier Stokes Equations ◽  
Pressure Distributions ◽  
Computational Fluid Dynamics Cfd

Hydraulic structures are often complex and in many cases their designs require attention so that the flow behavior around hydraulic structures and their influence on the environment can be predicted accurately. Currently, more efficient computational fluid dynamics (CFD) codes can solve the Navier–Stokes equations in three-dimensions and free surface computation in a significantly improved manner. CFD has evolved into a powerful tool in simulating fluid flows. In addition, CFD with its advantages of lower cost and greater flexibility can reasonably predict the mean characteristics of flows such as velocity distributions, pressure distributions, and water surface profiles of complex problems in hydraulic engineering. In Ethiopia, Tendaho Dam Spillway was constructed recently, and one flood passed over the spillway. Although the flood was below the designed capacity, there was an overflow due to superelevation at the bend. Therefore, design of complex hydraulic structures using the state-of- art of 3D hydrodynamic modelling enhances the safety of the structures. 3D hydrodynamic modelling was used to verify the safety of the spillway using designed data and the result showed that the constructed hydraulic section is not safe unless it is modified.

Numerical Study on Impeller Performance of Mini Hydro Turbine

2015 ◽  
Vol 772 ◽  
pp. 552-555 ◽  
Author(s):  
Kyu Han Kim ◽  
Joni Cahyono
Keyword(s):  
Stokes Equations ◽  
Numerical Study ◽  
Flow Behavior ◽  
Three Dimensional ◽  
Horizontal Axis ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Hydro Turbine ◽  
Pressure Distributions ◽  
Power Outputs

The aim of this paper is to numerically explore the feasibility of designing a Mini-Hydro turbine. The interest for this kind of horizontal axis turbine relies on its versatility. In the present study, the numerical solution of the discredited three-dimensional, incompressible Navier-Stokes equations over an unstructured grid is accomplished with an ANSYS program. In this study, a mini hydro turbine (3kW) has been considered for utilization of horizontal axis impeller. The turbine performance and flow behavior have been evaluated by means of numerical simulations. Moreover, the performance of the impeller varied in the pressure distribution, torque, rotational speed and power generated by the different number of blades and angles. The results trends are similar between the highest pressure distributions at the impeller also produced highest power outputs on 6 numbers of blades at impeller. The model has been validated, comparing numerical results with available experimental data.

scholarly journals Three-Dimensional Thermo Fluid Analysis of Large Scale Electric Motor

2000 ◽  
Vol 6 (6) ◽  
pp. 433-444 ◽  
Author(s):  
Debasish Biswas ◽  
Masaru Ishizuka ◽  
Hideo Iwasaki
Keyword(s):  
Electric Motor ◽  
Large Scale ◽  
Stokes Equations ◽  
Flow Behavior ◽  
The Body ◽  
Temperature Fields ◽  
Navier Stokes ◽  
Surface Boundary ◽  
Navier Stokes Equations ◽  
Flow Stagnation

In the present work, the flow and temperature fields in large scale rotating electric motor are studied by solving the Navier–Stokes equations along with the temperature equation on the basis of finite difference method. All the equations are written in terms of relative velocity with respect to the rotating frame of reference. Generalized coordinate system is used so that sufficient grid resolution could be achieved in the body surface boundary layer region. Differential terms with respect to time are approximated by forward differences, diffusion terms are approximated by the implicit Euler form, convection terms in the Navier–Stokes equations are approximated by the third order upwind difference scheme. The results of calculation led to a good understanding of the flow behavior, namely, the rotating cavity flow in between the supporting bar of the motor, the flow stagnation and region of temperature rise due to flow stagnation, etc. Also the measured average temperature of the motor coil wall is predicted quite satisfactorily.

The developing tangential velocity profile for axial flow in an annulus with a rotating inner cylinder

1968 ◽  
Vol 307 (1488) ◽  
pp. 55-69 ◽  
Keyword(s):  
Velocity Profile ◽  
Stokes Equations ◽  
Tangential Velocity ◽  
Axial Flow ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Taylor Vortices ◽  
Flow Through ◽  
Momentum Integral ◽  
Tangential Velocity Profile

A method is described of predicting the growth of a tangential velocity profile in fully developed laminar axial flow through a concentric annulus when the inner surface is rotated at speeds which are insufficient to generate Taylor vortices. The treatment, which is based on simplification and subsequent solution of the Navier-Stokes equations, as Fourier-Bessel series, appears preferable to momentum-integral techniques through greater simplicity of expression and in requiring fewer assumptions about the developing tangential profile. The validity of the predictions is best at high axial Reynolds number.

Prediction of Flow Behavior on Diffuser Angle in an Enclosure

2005 ◽  
Author(s):  
B. Tripathi ◽  
R. C. Arora ◽  
S. G. Moulic
Keyword(s):  
Laminar Flow ◽  
Energy Equation ◽  
Stokes Equations ◽  
Flow Behavior ◽  
Navier Stokes ◽  
Two Dimensional ◽  
Navier Stokes Equations ◽  
Specific Location ◽  
Temperature Distributions ◽  
Diffuser Angle

The present investigation deals with numerical prediction of airflow pattern in a room (enclosure) with a specific location of inlet and outlet with different values of Gr/Re2. Two-dimensional, steady, incompressible, laminar flow under Boussinesq’s approximation has been considered. The velocity and temperature distributions in a room have been found by solving Navier Stokes equations and energy equation numerically by SIMPLE and SIMPLEC algorithms.

Sign in / Sign up

Export Citation Format

Share Document