scholarly journals Kinetic energy spectrum of low-Reynolds-number turbulence with polymer additives

2013 ◽  
Vol 454 ◽  
pp. 012007 ◽  
Author(s):  
Takeshi Watanabe ◽  
Toshiyuki Gotoh
2015 ◽  
Vol 769 ◽  
pp. 403-443 ◽  
Author(s):  
Pierre Augier ◽  
Paul Billant ◽  
Jean-Marc Chomaz

This paper builds upon the investigation of Augier et al. (Phys. Fluids, vol. 26 (4), 2014) in which a strongly stratified turbulent-like flow was forced by 12 generators of vertical columnar dipoles. In experiments, measurements start to provide evidence of the existence of a strongly stratified inertial range that has been predicted for large turbulent buoyancy Reynolds numbers $\mathscr{R}_{t}={\it\varepsilon}_{\!K}/({\it\nu}N^{2})$, where ${\it\varepsilon}_{\!K}$ is the mean dissipation rate of kinetic energy, ${\it\nu}$ the viscosity and $N$ the Brunt–Väisälä frequency. However, because of experimental constraints, the buoyancy Reynolds number could not be increased to sufficiently large values so that the inertial strongly stratified turbulent range is only incipient. In order to extend the experimental results toward higher buoyancy Reynolds number, we have performed numerical simulations of forced stratified flows. To reproduce the experimental vortex generators, columnar dipoles are periodically produced in spatial space using impulsive horizontal body force at the peripheries of the computational domain. For moderate buoyancy Reynolds number, these numerical simulations are able to reproduce the results obtained in the experiments, validating this particular forcing. For higher buoyancy Reynolds number, the simulations show that the flow becomes turbulent as observed in Brethouwer et al. (J. Fluid Mech., vol. 585, 2007, pp. 343–368). However, the statistically stationary flow is horizontally inhomogeneous because the dipoles are destabilized quite rapidly after their generation. In order to produce horizontally homogeneous turbulence, high-resolution simulations at high buoyancy Reynolds number have been carried out with a slightly modified forcing in which dipoles are forced at random locations in the computational domain. The unidimensional horizontal spectra of kinetic and potential energies scale like $C_{1}{\it\varepsilon}_{\!K}^{2/3}k_{h}^{-5/3}$ and $C_{2}{\it\varepsilon}_{\!K}^{2/3}k_{h}^{-5/3}({\it\varepsilon}_{\!P}/{\it\varepsilon}_{\!K})$, respectively, with $C_{1}=C_{2}\simeq 0.5$ as obtained by Lindborg (J. Fluid Mech., vol. 550, 2006, pp. 207–242). However, there is a depletion in the horizontal kinetic energy spectrum for scales between the integral length scale and the buoyancy length scale and an anomalous energy excess around the buoyancy length scale probably due to direct transfers from large horizontal scale to small scales resulting from the shear and gravitational instabilities. The horizontal buoyancy flux co-spectrum increases abruptly at the buoyancy scale corroborating the presence of overturnings. Remarkably, the vertical kinetic energy spectrum exhibits a transition at the Ozmidov length scale from a steep spectrum scaling like $N^{2}k_{z}^{-3}$ at large scales to a spectrum scaling like $C_{K}{\it\varepsilon}_{\!K}^{2/3}k_{z}^{-5/3}$, with $C_{K}=1$, the classical Kolmogorov constant.


Author(s):  
R Pacciani ◽  
M Marconcini ◽  
A Arnone ◽  
F Bertini

The laminar kinetic energy (LKE) concept has been applied to the prediction of low-Reynolds number flows, characterized by separation-induced transition, in high-lift airfoil cascades for aeronautical low-pressure turbine applications. The LKE transport equation has been coupled with the low-Reynolds number formulation of the Wilcox's k − ω turbulence model. The proposed methodology has been assessed against two high-lift cascade configurations, characterized by different loading distributions and suction-side diffusion rates, and tested over a wide range of Reynolds numbers. The aft-loaded T106C cascade is studied in both high- and low-speed conditions for several expansion ratios and inlet freestream turbulence values. The front-loaded T108 cascade is analysed in high-speed, low-freestream turbulence conditions. Numerical predictions with steady inflow conditions are compared to measurements carried out by the von Kármán Institute and the University of Cambridge. Results obtained with the proposed model show its ability to predict the evolution of the separated flow region, including bubble-bursting phenomenon and the formation of open separations, in high-lift, low-Reynolds number cascade flows.


2010 ◽  
Vol 133 (3) ◽  
Author(s):  
Roberto Pacciani ◽  
Michele Marconcini ◽  
Atabak Fadai-Ghotbi ◽  
Sylvain Lardeau ◽  
Michael A. Leschziner

A three-equation model has been applied to the prediction of separation-induced transition in high-lift low-Reynolds-number cascade flows. Classical turbulence models fail to predict accurately laminar separation and turbulent reattachment, and usually overpredict the separation length, the main reason for this being the slow rise of the turbulent kinetic energy in the early stage of the separation process. The proposed approach is based on solving an additional transport equation for the so-called laminar kinetic energy, which allows the increase in the nonturbulent fluctuations in the pretransitional and transitional region to be taken into account. The model is derived from that of Lardeau et al. (2004, “Modelling Bypass Transition With Low-Reynolds-Number Non-Linear Eddy-Viscosity Closure,” Flow, Turbul. Combust., 73, pp. 49–76), which was originally formulated to predict bypass transition for attached flows, subject to a wide range of freestream turbulence intensity. A new production term is proposed, based on the mean shear and a laminar eddy-viscosity concept. After a validation of the model for a flat-plate boundary layer, subjected to an adverse pressure gradient, the T106 and T2 cascades, recently tested at the von Kármán Institute, are selected as test cases to assess the ability of the model to predict the flow around high-lift cascades in conditions representative of those in low-pressure turbines. Good agreement with experimental data, in terms of blade-load distributions, separation onset, reattachment locations, and losses, is found over a wide range of Reynolds-number values.


1988 ◽  
Vol 110 (2) ◽  
pp. 187-194 ◽  
Author(s):  
S. A. Shirazi ◽  
C. R. Truman

An anisotropic form of a low-Reynolds-number two-equation turbulence model has been implemented in a numerical solution for incompressible turbulent flow between corotating parallel disks. Transport equations for turbulent kinetic energy and dissipation rate were solved simultaneously with the governing equations for the mean-flow variables. Comparisons with earlier mixing-length predictions and with measurements are presented. Good agreement between the present predictions and the measurements of velocity components and turbulent kinetic energy was obtained. The low-Reynolds-number two-equation model was found to model adequately the near-wall region as well as the effects of rotation and streamline divergence, which required ad hoc assumptions in the mixing-length model.


2013 ◽  
Vol 717 ◽  
pp. 535-575 ◽  
Author(s):  
Takeshi Watanabe ◽  
Toshiyuki Gotoh

AbstractThe effects of polymer additives on decaying isotropic turbulence are numerically investigated using a hybrid approach consisting of Brownian dynamics simulations for an enormous number of dumbbells (of the order of 10 billion,$O(1{0}^{10} )$) and direct numerical simulations of turbulence making full use of large-scale parallel computations. Reduction of the energy dissipation rate and modification of the kinetic energy spectrum in the dissipation range scale were observed when the reaction term due to the polymer additives was incorporated into the equation of motion for the solvent fluid. An increase in the polymer concentration or Weissenberg number${W}_{i} $yielded significant modifications of the turbulence statistics at small scales, such as a suppression of the local energy dissipation fluctuations. A power-law decay of the kinetic energy spectrum$E(k, t)\sim {k}^{- 4. 7} $was observed in the wavenumber range below the Kolmogorov length scale when${W}_{i} = 25$. The generation of intense vortices was suppressed by the polymer additives, consistent with previous studies using the constitutive equations. The field structures of the trace of the polymer stress depended on the intensity of its fluctuation: sheet-like structures were observed for the intermediate intensity region and filamentary structures were observed for the intense region. The results obtained with few polymers and large replicas could approximate those with many polymers and smaller replicas as far as the large-scale statistics were concerned.


2018 ◽  
Vol 12 (3) ◽  
pp. 255
Author(s):  
Muhammad Zal Aminullah Daman Huri ◽  
Shabudin Bin Mat ◽  
Mazuriah Said ◽  
Shuhaimi Mansor ◽  
Md. Nizam Dahalan ◽  
...  

Author(s):  
Vadim V. Lemanov ◽  
Viktor I. Terekhov ◽  
Vladimir V. Terekhov

Sign in / Sign up

Export Citation Format

Share Document