scholarly journals Investigation of the width of the entry of an excavator when loading a mobile crushing plant in the conditions of the Angren coal mine of Uzbekistan

2021 ◽  
Vol 937 (4) ◽  
pp. 042088
Author(s):  
G Bulatov ◽  
T Annakulov

Abstract This article presents the results of studies to establish the optimal entry width for an excavator working in conjunction with mobile crushing plants in the development of overburden of the Angren open pit. According to the results of the research, an analytical relationship was established to determine the maximum productivity of the mining system “excavator-mobile crushing-reloading-conveyor complex” with cyclical-flow technology. A structural diagram has been developed that allows you to select the type and determine the main technological parameters of the equipment with the selected criteria for evaluating the effectiveness of the complexes. It has been established that the choice of equipment for conveyor lines should be carried out taking into account the mutual influence of adjacent technological links of the central heating systems, including the influence of the excavator-crushing and crushing-conveyor complexes on the efficiency of their mutual functioning within the framework of the adopted system as a whole. A functional graphical dependence of the excavator performance on the face width was obtained, taking into account the relationship of all technological parameters of the face. It has been established that the maximum excavator productivity of 1478.1 m3/hr is achieved with an excavator entry width of 17.4 m for the conditions of the Angren open pit. The resulting schedule makes it possible to assess the possibility of increasing the operational performance of single-bucket shovel excavators under various conditions of work, as well as to continue the optimization of excavation.

1998 ◽  
Vol 6 (3) ◽  
pp. 149-151 ◽  
Author(s):  
Leslie G Farkas ◽  
John H Phillips ◽  
Marko Katic

The ratio of morphological (bialar diameter [al-al]):anatomical (alar base width [ac-ac]) nose width defines the quality of the soft nose contours. Quantitative data on ac-ac and its relationship to al-al, and the relationship of both nose widths to face width (bizygomatic diameter) have not been available in the literature. To correct this, the anatomical and morphological widths of the nose were measured anthropometrically in an ethnically mixed group of 120 healthy, young adult, Caucasian Canadians, and the ratios of nose widths:face width (which greatly influences nasofacial harmony in the frontal view) calculated. In 80% of subjects, the morphological (classical) nose width was larger than the anatomical nose width, which has close contact with the underlying skeleton. Mean nose width was 24.9% (ac-ac) and 26.1% (al-al) of the face width. This study may help in the corrective surgery of disproportions between the two nose-width measurements in patients with cleft lip nose, and in the restoration of harmony between the nose and face widths.


Author(s):  
V. V. Agafonov ◽  
G. N. Shapovalenko ◽  
S. N. Radionov ◽  
V. Yu. Zalyadnov ◽  
N. S. Bikteeva

Many coal mines in Russia tend toward increasing their production output. Chernogorsky open pit mine, having expanded output by more than 30% for the last five years, is not exclusion. As output is increased whereas geological conditions complicate, technological parameters and production efficiency change. For example, in the open pit, percentage of overburden removal with direct dumping has greatly shrunk as against the truck-and-shovel system. In the meanwhile, the cost of stripping with the tuck-and-shovel system is much higher than in direct dumping by walking excavators. This article gives an analysis of technological parameters, open pit mining system parameters and stripping arrangement at the mine. The authors examine costs of stripping machinery maintenance and compare specific capacities of equipment in use. The modeling results on further increase in productivity of the open pit mine and in capacity of walking excavators are presented with the calculated optimized height of bench for stripping with direct dumping. The reserves available to increase stripping efficiency lie, in the authors’ opinion, in the system of resource allocation for equipment operability maintenance and personnel motivation.


2017 ◽  
Vol 48 (8) ◽  
pp. 1183-1197 ◽  
Author(s):  
Eva M. Romera ◽  
Mauricio Herrera-López ◽  
José A. Casas ◽  
Rosario Ortega-Ruiz ◽  
Olga Gómez-Ortiz

International research on the risk and protective factors of cyberbullying focus on individual personality variables and the use of technological devices. However, it is necessary to examine in greater depth the interpersonal context as a factor that may influence cyberbullying and the possible differences between cultures. The objective of this article was to analyze the relationship of influence of two interpersonal variables, multidimensional social competence and social motivation, on cyberaggression and cybervictimization through a cultural study of Spain and Colombia, which will permit generalizing the influence of interpersonal variables on cyberbullying in different cultural settings. The sample consisted of 3,830 secondary school students (50.4% Colombian and 49.6% Spanish). Self-reporting measurement instruments validated with different European samples were used. Confirmatory factor analysis (CFA) and structural equation modeling (SEM) were performed. A model of mutual influence revealing the inverse relationship of normative adjustment and the direct relationship of popularity goals in cyberaggression was obtained. Cybervictimization was explained by the direct influence of prosocial behaviors and avoidance goals and the inverse influence of perceived social efficacy, development goals, and social and normative adjustment. As conclusion, this study demonstrates the homogeneity of the Colombian and Spanish models and the important role that the face-to-face context plays in cyberbullying involvement. This article highlights and supports the design of cyberbullying prevention programs, which requires the inclusion of multidimensional social competence and social goals.


2021 ◽  
Vol 100 (2) ◽  
pp. 50-57
Author(s):  
I. Shepelenko ◽  

The conditions for the antifriction coatings formation during finishing antifriction non-abrasive treatment (FANT) are analyzed. The requirements for this kind of coatings and the main criteria for assessing their quality are noted. A relationship has been established between the quality of the coating obtained with FANT and the technological factors that determine the conditions for contacting the tool with the treated surface. It is proved that the shape and size of microroughnesses of the treated surface determine the efficiency of the microcutting process and filling the microcavities with the rubbed material. Technological factors influence on the coating quality was investigated during FANT by implementing a multifactor experiment, as a result of which a connection was established between the technological parameters of the process (total friction path, load on the tool), as well as the length of the supporting surface with indicators characterizing the coating quality. Statistical models were obtained for mass transfer of antifriction material, area (continuity) of the coating and surface roughness at natural values of the factors, which made it possible to establish the studied factors influence on the optimization parameters. The analysis of the experimental scattering graphs made it possible to clarify the nature of the factors changes and analyze their mutual influence on the optimization criteria. Taking into account the inversely proportional relationship of the optimization criteria, the achievement of their maximum values at the same time is impossible, therefore, the values are taken according to the final result of the FANT process. The range of the studied factors values is established, the regularities of their change are substantiated from the point of view of the selected optimization criteria. Determination the rational values of the FANT process technological parameters will improve the antifriction coatings quality obtained by a friction-mechanical method.


2020 ◽  
Vol 36 (03) ◽  
pp. 309-316
Author(s):  
Ozcan Cakmak ◽  
Ismet Emrah Emre

AbstractPreservation of the facial nerve is crucial in any type of facial procedure. This is even more important when performing plastic surgery on the face. An intricate knowledge of the course of the facial nerve is a requisite prior to performing facelifts, regardless of the technique used. The complex relationship of the ligaments and the facial nerve may put the nerve at an increased risk of damage, especially if its anatomy is not fully understood. There are several danger zones during dissection where the nerve is more likely to be injured. These include the areas where the nerve branches become more superficial in the dissection plane, and where they traverse between the retaining ligaments of the face. Addressing these ligaments is crucial, as they prevent the transmission of traction during facelifts. Without sufficient release, a satisfying pull on the soft tissues may be limited. Traditional superficial musculoaponeurotic system techniques such as plication or imbrication do not include surgical release of these attachments. Extended facelift techniques include additional dissection to release the retaining ligaments to obtain a more balanced and healthier look. However, these techniques are often the subject of much debate due to the extended dissection that carries a higher risk of nerve complications. In this article we aim to present the relationship of both the nerve and ligaments with an emphasis on the exact location of these structures, both in regard to one another and to their locations within the facial soft tissues, to perform extended techniques safely.


2000 ◽  
Vol 12 (1-4) ◽  
pp. 141-161
Author(s):  
Robert N. Mccauley

AbstractThe aims of this paper are to identify three barriers to the development of cognitive approaches to the study of religion and to suggest how each might be circumvented. The first of these barriers is methodological and lurks amid two issues that, historically, have dominated anthropologists' reflections on the relationship of their discipline to psychology. The older of the two can be characterized as the "psychic unity" controversy (see Shore 1995). The second issue is the controversy over the "autonomy of culture". Advocates of the latter thesis are usually unsympathetic to psychological explanations of religious phenomena. In the first section, I shall begin by briefly examining each of those issues and then exploring the connections between the two as well as interesting logical tensions that arise in the face of popular responses to each. In section two, I shall consider a pair of barriers to a cognitive psychology of religion rooted in two strategies that have dominated many psychologists' approaches to the study of religion. I will argue that for some purposes, at least, both strategies should be relaxed. Finally, in section three, I shall briefly sketch one sort of cognitive approach to religious phenomena, suggesting how it handles the two strategic barriers in particular.


ASJ. ◽  
2021 ◽  
Vol 1 (49) ◽  
pp. 49-51
Author(s):  
I. Zharikov

The results of the analysis of the application of the methods of the theory of queuing for calculating the capacity of the receiving hopper of an open-pit crushing plant used in combination with a combined automobile-conveyor transport are presented. An analytical expression is given for calculating the capacity of the bunker, taking into account the minimum possible duration of the interval between unloading dump trucks into the bunker. The capacity of the receiving hopper of the crushing plant with a capacity of 4300 t / h was determined when working with dump trucks with a carrying capacity of up to 180 tons.


2017 ◽  
Vol 3 (1) ◽  
Author(s):  
Larissa Fonseca

Sinopse: Em meio ao colorido de goiabas, batatas e flores mais que cheiros e sabores, descobrir pessoas. Agricultoras e agricultores que com suas histórias e lutas, estão representados nas varandas e nas mesas da cidade. Trazer a imagem não de uma feira, mas de cada pessoa que diariamente se dedica ao cultivo e à produção de alimentos. Encontrar o rosto e as escolhas de outros modos de fazer agricultura, de outros modos de se alimentar. De assentados e suas lutas pela preservação de sementes crioulas, de jovens universitários e sua determinação em permanecer no campo e de fumicultores aposentados dispostos a limpar suas terras dos venenos de mais 30 anos de cultivos agressivos, é feita a Feira Sabores da Terra. Feira da agricultura familiar do município de Canguçu, Rio Grande do Sul, que acontece todas as segundas-feiras à tarde e reúne cerca de 18 produtores. Em um pavilhão de madeira no centro da cidade são expostos doces coloniais, panificados, frangos congelados, farinhas, feijões, legumes, verduras, frutas e flores, em variedade conforme a estação do ano. Produtos que são vendidos entre boas conversas, rodas de chimarrão e é claro, uma melancia bem gelada ou uma deliciosa rapadura. Para a permanência e continuação da feira, que se realiza há pouco mais de um ano, os feirantes têm enfrentado e superado dificuldades. A distância de suas propriedades até a cidade, muitas das vezes são mais do que duas horas de viagem. A demanda, pelos consumidores, por produtos conforme padrões estéticos dos alimentos produzidos com veneno. O cansaço de mãos que, com mais de 40 anos de trabalho, ainda enfrentam a roça durante toda a semana e o frio, a chuva e o calor de uma feira praticamente ao ar livre. O conciliar o trabalho agrícola e a feira com os estudos, cujo acesso limitado pela distância das universidades, das oportunidades de estágios e pela dificuldade de ascender ao ensino público superior. Apesar de tão próximos, rostos e mãos muitas vezes invisíveis em escolhas alimentares. Gente que oportuniza uma alternativa à alimentação. Alimentação proveniente da relação de mulheres e homens com a terra, de suas sabedorias e ações. Feira Sabores da Terra, um ponto de aproximação entre o campo e a cidade, entre o cultivo e o alimento, entre o cuidado e o sabor. De agricultoras e agricultores e seus feijões, morangos e biscoitos. Este ensaio fotográfico é parte da agenda de pesquisa “Saberes e Sabores da Colônia”, desenvolvida no âmbito do Grupo de Estudos e Pesquisas em Alimentação e Cultura (GEPAC) e vinculada ao Bacharelado e ao Programa de Pós-Graduação em Antropologia da Universidade Federal de Pelotas. Synopsis: In the middle of colored places with guava , potatoes and flowers more than smells of flavors, we discover people. Farmers, with your stories and struggles, are represented on the balconies and tables of the city. Representing the image of each person that daily is dedicated to the cultivation and food production, not just the image of a fair is much more than that. Find the face and choices of other ways of doing agriculture and others ways of feeding. From the land reform settlements and their struggles for the preservation of native seeds, of university students and their determination to remain in the field and retires tobacco growers willing to clear their land of the poisons of another 30 years of aggressive crops, is made the Flavors of the Earth Fair. Family Agriculture Fair, in the Canguçu City in Rio Grande do Sul, Brazil, of what happens on every Monday afternoon and brings together about 18 small farmers. In a wooden pavilion in Downtown city are exposed colonial sweets, bakery products, quick-frozen, flours, beans, vegetables, fruits and flowers in variety according to season. Products that are sold as God´s taste is of course chimarrão, and watermelon ice-cold or a delicious rapadura. For the permanence and continuation of the green fair, been held little more than a year ago, the small farmers have had and overcome difficulties. The distance of their properties of the Downtown , often last more than two hours of the trip. The consumer demand by products according to aesthetic standards of foods produced with venom. The fatigue of hands, still for more than 40 years of work, are still facing small farm during the days in a cool, rain and heat weather and the a fair still open. To reconcile agricultural work and the fair with studies, to which access is restricted by distances from universities, internship opportunities, and the difficulty of access to higher public education. Although close, often invisible faces and hands in food choices. People who offer alternative food. Food derived from the relationship of men and women to the land, of his wisdom and actions. Flavors of The Hearth Fair, a point of approximation between the countryside and the city, between the crop and the food, between care and taste. Of farmers and agriculturists and their beans, strawberries and biscuits. This photo essay is part of research agenda “Knowledge and tastes of the agricultural colony”, developed in the framework of the Group of the Studies and Researches in Food an Culture (GEPAC) and linked to the Bachelor’s and the Postgraduate Program In Anthropology of Federal University of Pelotas. Palavras-chave: Agricultura Familiar – Campesinato – Feira – Alimentação - Consumo Key-words: : Family Agriculture - Peasantry – Fair – Food - Consumption Ficha técnica: Direção: Larissa Fonseca Roteiro: Larissa Fonseca Fotografia: Larissa Fonseca Coordenação de Pesquisa: Renata Menasche Edição de Imagem: Larissa Fonseca e Hamilton Bittencourt Assessoria em Imagem: Claudia Turra Magni Credits: Author: Larissa Fonseca Photographs: Larissa Fonseca Direction: Larissa Fonseca Research Coordination: Renata Menasche Image Editing: Larissa Fonseca e Hamilton Bittencourt Image Consulting: Claudia Turra Magni.


2012 ◽  
Vol 130 ◽  
pp. 42
Author(s):  
Mohammed Alghoul ◽  
Ozan Bitik ◽  
Jennifer McBride ◽  
James E. Zins

2017 ◽  
Vol 20 (3) ◽  
Author(s):  
Elaine Cristina Sousa Dos Santos ◽  
Diego Jesus Bradariz Pimentel ◽  
Laís Lopes Machado De Matos ◽  
Laís Valencise Magri ◽  
Ana Maria Bettoni Rodrigues Da Silva ◽  
...  

<p><strong>Objective: </strong>To compare the proportion and linear measurement indexes between Brazilian and Peruvian population through 3D stereophotogrammetry and to stablish the face profile of these two Latin American populations. <strong>Material and Methods: </strong>40 volunteers (Brazilian n=21– 10 males and 11 females; Peruvian n=19 – 8 males and 11 females) aged between 18 and 40 years (mean of 28.7±9.1) had landmarks marked on the face. Then, 3D images were obtained (VECTRA M3) and the indexes of proportion and linear measurement (face, nose, and lips) were calculated. The data were statistically analyzed by One-Way ANOVA (p&lt;0.05). <strong>Results: </strong>The proportion indexes did not reveal marked differences either between the studied populations or genders (p&gt;0.05). The following linear measurements showed intergroup statistically significant differences: face width and height, nose width and height, upper facial height, mouth width, protrusion of the nose tip (p&lt;0.05). The Brazilian females showed the smallest significant differences. <strong>Conclusions: </strong>Despite the different ethnic compositions, the Brazilian and Peruvian populations did not differ regarding the proportions of the face, nose, and lips. The differences observed in Brazilian females may be related to gender and/or to the Caucasian heritage of the Brazilian sample.</p><p><strong>Keywords</strong></p><p>Photogrammetry; Face; Tridimensional Image.<strong></strong></p>


Sign in / Sign up

Export Citation Format

Share Document