scholarly journals Interconnected operation of the ozone generator with the power supply unit

2021 ◽  
Vol 939 (1) ◽  
pp. 012002
Author(s):  
M Ibragimov ◽  
I E Tadjibekova ◽  
O Matchonov

Abstract This article is addressed to the inductivity of the feeder transformer influence on of the plate-type ozone generator operating modes. The equation characterises the ozone generator interconnected operation with the transformer, in discharge and non-discharge modes is represented. Use of the near-resonant mode of operation is proposed with a view to reach maximum output capacity. With that end in view, it is proposed to use the transformer with higher inductance. Oscillograph charts of two modes of operation of the ozone generator are analysed. Current waveform factors are determined by the harmonic analysis method. Experiments proved that current waveform factor increase in value for the account of continuous discharge is conductive to increase of ozone output by 25-30 % and power loss reduction by 10-15 %.

Author(s):  
I. A. Afanasiev ◽  
V. V. Tkach

Annotation Purpose. Improving the efficiency of machine milking due to the improvement of milking equipment on the basis of the portion meter of the weight type. Methods. Studies have been conducted on the basis of the planned experiment. The data obtained were processed using the methods of regression analysis. Results. The technique of laboratory researches is developed, a prototype of a membrane regulator of vacuum is made and experimental researches of operating modes of the adaptive milking equipment on the basis of the portion meter of the weight type. According to the results of the research, the dependence between the parameters and the mode of operation of the membrane vacuum regulator was obtained. Conclusions. The dependence is obtained, between the vacuum pressure in the milk collection chamber of the collector, milk expense, the diameters of the milk pipe and the diameters of a throttle opening. The limit values of the intensity of milk output (0.2 m3/s) at which there is a critical drop in the working vacuum pressure in the milk collection chamber of the collector and the corresponding choke parameters (diameter of the throttle opening 0,001 m) are defined. This eliminates this negative phenomenon. Keywords: adaptive milking equipment, milking machine, machine milking, milk expense.


Author(s):  
Vladimir Aleksandrovich Khokhlov ◽  
Aleksandr Vasilevich Khokhlov ◽  
Janna Olegovna Titova

This chapter describes the methods and devices of energy-saving regulation for irrigative pumping stations based on principles of power loss reduction in pressure pipelines. These concepts are scientifically substantiated and developed. Protection of the main power equipment and pipelines of pumping stations from water at transients are developed and devices for their implementation are designed. The use of the research results will make it possible to plan the electric energy consumption, to make an estimation of power-hydraulic equipment operation quality and safety, to find the sources of energy loss and ways to reduce working at the pumping stations in the rural branches of economy.


Electronics ◽  
2019 ◽  
Vol 8 (4) ◽  
pp. 393 ◽  
Author(s):  
Guofeng Jiang ◽  
Yangyu Fan ◽  
Hongbo Yuan ◽  
Pengliang Yuan

Analysis of the coexistence of two or more types of equipment is increasingly important. However, at present studies on the analysis method in the time domain are scant. Therefore, the aim of this paper is to explore the characteristics of signals and relations between interfering and desired signals in the time domain. Based on the periodicity of a signal, this paper presents a Periodic Pulse Overlap Method (PPOM). Using PPOM to analyze the interference from Distance Measuring Equipment (DME) to Air Traffic Control Radar Beacon System (ATCRBS) in the time domain, we obtain almost the same result as that based on the Monte Carlo Method (MCM). Furthermore, we discover the measures to reduce or even avoid interference, such as changing the Pulse Recurrence Frequency (PRF), adjusting the difference of initial time, and switching the operating modes of the equipment.


2014 ◽  
Vol 494-495 ◽  
pp. 1482-1486
Author(s):  
Xiao Li Luo ◽  
Wan Tai Liu ◽  
Hui Fang Zhou ◽  
Sheng Hua Luo

In this paper, faced with the modeling problems of analysis and calculation for iron losses in variable-frequency motor under no-sinusoidal excitation, the author points out a method that the iron losses can be calculated under any magnetic field ,that is waveform-Harmonic analysis method. In consideration of the impact of Power supply harmonics, Core saturation and Skin Effect, the author proposes a new parameter -- Harmonic Loss Correction Factor. From the comparisons between the prototype test results and the theoretical results show that this method has high accuracy and strong feasibility.


Sign in / Sign up

Export Citation Format

Share Document