scholarly journals The Shear Strength Parameters as a Function of the Volumetric Water Content of Baghdad City Soils at Tigris River Bank

2021 ◽  
Vol 1058 (1) ◽  
pp. 012073
Author(s):  
A A Al-Obaidi ◽  
R H Irzooki ◽  
H F Al-Dulaimy
Author(s):  
Ary Sismiani ◽  
Iwan Rustendi

In several places in the Banyumas Regency area, land movement problems have often occurred. Several locations have been declared as red zones, one of which is Beji, Cirahab Village, Lumbir District. With such regional conditions, it is necessary to conduct a study of the technical and mechanical properties of the soil in that location including moisture content, density and shear strength parameters related to the possibility of soil movement that will occur. From the results of the test and analysis using 3 specimens, the following data were obtained: water content of 20.22%, 30.36%, 40.31% with a cohesion value of 0.14 kg / cm2, 0.56 kg / cm2, 0.33 kg / cm2, and the internal friction angles of the soil are 30.22 °, 24.47 °, and 18.93 °. While the value of shear stress and displacement at maximum normal stress and moisture content of 20.22%, 30.36%, 40.31% are t(w1) = 0.68 kg / cm2,  t(w2) = 1.01 kg / cm2 ,t (w3) = 0.68 kg / cm2 and dn1 = 15.02%, dn2 = 10.02, dn3 = 13.35%. It can be concluded that the water content always has a very big influence on the value of the soil shear strength parameter. Therefore, the condition of the water content on the soil slope needs to be considered, and it is necessary to carry out further tests and more serious handling at that location.


2011 ◽  
Vol 52-54 ◽  
pp. 1752-1756
Author(s):  
Li Hong Chen ◽  
Yu Fei Zhao

The design and safety evaluation of a geotechnical project is influenced by the shear strength parameters of geo-material. Moment method and linear regression method are the mainly used methods to estimate the shear strength parameters. But moment method is always over estimate the variation of strength parameters due to the smaller sample size, meanwhile the conventional linear regression method cannot obtain the standard deviation. Base on the reliability theory, a new method employing Solver add-in of spreadsheet was developed to calculate the shear strength parameters. The method was simplified by the principle that the shortest distance form origin point to the limit state surface in the normalization space was the reliability index. Four hundred and four samples of direct shear tests of rock mass from many large hydraulic projects in China were analyzed by four statistic methods including the new proposed one. Comparing results of different methods indicated that the new reliability statistic method had good performance than the traditional ways.


Sign in / Sign up

Export Citation Format

Share Document