Stability-Indicating RP-HPLC and CE Methods for Simultaneous Determination of Bisoprolol and Perindopril in Pharmaceutical Formulation: A Comparative Study

2020 ◽  
Vol 58 (8) ◽  
pp. 747-758
Author(s):  
Said A Hassan ◽  
Nancy W Nashat ◽  
Mohamed R Elghobashy ◽  
Samah S Abbas ◽  
Azza A Moustafa
Keyword(s):  
Capillary Electrophoresis ◽  
Simultaneous Determination ◽  
High Performance ◽  
Degradation Products ◽  
Reversed Phase ◽  
Hplc Method ◽  
Pharmaceutical Formulation ◽  
British Pharmacopoeia ◽  
Stability Indicating

Abstract Two fast, accurate and selective stability-indicating methods were developed and validated for the simultaneous determination of bisoprolol, perindopril and three of their possible degradation products. The first proposed method was a gradient reversed phase-high-performance liquid chromatography (HPLC) method, whereas the second was a capillary electrophoresis method. The structures of the obtained degradation products were elucidated using infrared and mass spectrometry. They were also confirmed to be either a drug impurity in the British Pharmacopoeia or a precursor to such impurity. The linearity for bisoprolol and perindopril was achieved in the range of 1–20 μg mL−1 and 5–30 μg mL−1 for HPLC and capillary electrophoresis methods, respectively. The proposed methods were validated according to the International Conference on Harmonisation guidelines. The HPLC method proved to be more sensitive and succeeded in the quantitative determination of the obtained degradation products. Also, it was able to quantify perindopril impurity up to three times lower than the desired limit set by the British Pharmacopoeia. They were successfully employed in the determination of bisoprolol and perindopril in their combined pharmaceutical formulation.

scholarly journals A Validated High-Performance Thin-Layer Chromatographic Method for the Simultaneous Determination of Zofenopril Calcium and Hydrochlorothiazide in the Presence of the Hydrochlorothiazide Impurities: Chlorothiazide and Salamide

2018 ◽  
Vol 101 (4) ◽  
pp. 1031-1041 ◽  
Author(s):  
Mamdouh R Rezk ◽  
Ahmed S Fayed ◽  
Hoda M Marzouk ◽  
Samah S Abbas
Keyword(s):  
Simultaneous Determination ◽  
High Performance ◽  
Degradation Products ◽  
Raw Materials ◽  
Drug Product ◽  
Hplc Method ◽  
Pharmaceutical Formulation ◽  
Significant Difference ◽  
Hptlc Method

Abstract The chromatographic analysis of either process-related impurities or degradation products is very important in the pharmaceutical industry. In this work, a simple, selective, and sensitive HPTLC method was developed and validated for the simultaneous determination of zofenopril calcium (ZOF) and hydrochlorothiazide (HCT) in the presence of the HCT impurities: A) chlorothiazide (CT) and B) salamide, in raw materials and in pharmaceutical formulation. The separation was carried out on HPTLC silica gel 60 F254 using ethyl acetate–glacial acetic acid–triethylamine (10 + 0.1 + 0.1, v/v/v) as a developing system. The separated bands were scanned densitometrically at 270 nm. Polynomial equations were used for the regression. Calibration curves were constructed for ZOF, HCT, CT, and salamide in the ranges of 0.5–10, 0.2–4, 0.05–1.4, and 0.05–1.0 μg/band, respectively. Different parameters affecting the suggested method, including developing systems of varying composition/ratios and different detection wavelengths, were studied to achieve the best resolution and precision with good sensitivity. System suitability parameters were also tested. The proposed method was validated as per the International Conference on Harmonization guidelines and was successfully applied for the quantification of the studied drugs in their pharmaceutical formulation, with no interference from excipients observed. The results obtained by the developed HPTLC method were compared statistically with those obtained by the reported HPLC method using Student’s t and F ratio tests, and no significant difference was obtained, indicating the ability of the proposed method to be used for routine analysis of drug product.

Stability-Indicating TLC-Densitometric and HPLC Methods for the Simultaneous Determination of Piracetam and Vincamine in the Presence of Their Degradation Products

2016 ◽  
Vol 99 (6) ◽  
pp. 1490-1498 ◽  
Author(s):  
Amal B Ahmed ◽  
Maha M Abdelrahman ◽  
Nada S Abdelwahab ◽  
Fathy M Salama
Keyword(s):  
Simultaneous Determination ◽  
Degradation Products ◽  
Hplc Method ◽  
Pharmaceutical Formulation ◽  
Stability Indicating ◽  
Rp Hplc ◽  
Accuracy And Precision ◽  
Array Detection ◽  
Assay Methods

Abstract Newly established TLC-densitometric and RP-HPLC methods were developed and validated for the simultaneous determination of Piracetam (PIR) and Vincamine (VINC) in their pharmaceutical formulation and in the presence of PIR and VINC degradation products, PD and VD, respectively. The proposed TLC-densitometric method is based on the separation and quantitation of the studied components using a developing system that consists of chloroform–methanol–glacial acetic acid–triethylamine (8 + 2 + 0.1 + 0.1, v/v/v/v) on TLC silica gel 60 F254 plates, followed by densitometric scanning at 230 nm. On the other hand, the developed RP-HPLC method is based on the separation of the studied components using an isocratic elution of 0.05 M KH2PO4 (containing 0.1% triethylamine adjusted to pH 3 with orthophosphoric acid)–methanol (95 + 5, v/v) on a C8 column at a flow rate of 1 mL/min with diode-array detection at 230 nm. The developed methods were validated according to International Conference on Harmonization guidelines and demonstrated good accuracy and precision. Moreover, the developed TLC-densitometric and RP-HPLC methods are suitable as stability-indicating assay methods for the simultaneous determination of PD and VD either in bulk powder or pharmaceutical formulation. The results were statistically compared with those obtained by the reported RP-HPLC method using t- and F-tests.

scholarly journals A SIMPLE (HPLC–UV) METHOD FOR THE QUANTIFICATION OF COLCHICINE IN BULK AND ETHOSOMAL GEL NANO-FORMULATION AND ITS VALIDATION

2017 ◽  
Vol 9 (7) ◽  
pp. 72 ◽  
Author(s):  
Ibrahim M. Abdulbaqi ◽  
Yusrida Darwis ◽  
Nurzalina Abdul Karim Khan ◽  
Reem Abou Assi ◽  
Gabriel Onn Kit Loh
Keyword(s):  
High Performance ◽  
Limit Of Detection ◽  
Degradation Products ◽  
Reversed Phase ◽  
Hplc Method ◽  
Acid Oxidation ◽  
Limit Of Quantification ◽  
Stability Indicating ◽  
Stress Degradation

Objective: To develop and validate a stability-indicating reversed phase high-performance liquid chromatography (RP-HPLC) method for the determination of colchicine in bulk and ethosomal gel nano-formulation.Methods: The chromatographic conditions were optimized using stainless steel Hypersil Gold C-18 analytical column with the dimensions of 250 mm x 4.6 mm ID x 5 µm. The mobile phase consisted of acetonitrile and ammonium acetate buffer (20 mmol/l, pH=4.85) in the ratio of 32:68 v/v. The flow rate was set at 1 ml/min and the detection wavelength was 353 nm. The column was maintained at 30 °C and the injection volume was 10 µl. The stability of colchicine in different conditions was investigated by exposing the drug to stress degradation using acid, base, oxidation, heat and light.Results: There was no interference from excipients, impurities, dissolution media or degradation products at the retention time of colchicine 5.9 min indicating the specificity of the method. The limit of detection (LOD) and the limit of quantification (LOQ) were 8.64 ng/ml and 26.17 ng/ml respectively. The drug showed good stability under heat, acid, oxidation and light, but substantial degradation was observed under alkali condition. The procedure was validated for specificity, linearity, accuracy and precision.Conclusion: A simple, rapid, specific and stability-indicating HPLC–UV method for the determination of colchicine in the pure and ethosomal gel was successfully developed. The developed method was statistically confirmed to be accurate, precise, and reproducible.

scholarly journals A Rapid Stability-Indicating RP-HPLC Method for the Determination of Betaxolol Hydrochloride in Pharmaceutical Tablets

2013 ◽  
Vol 8 ◽  
pp. ACI.S11256 ◽  
Author(s):  
Sylvain Auvity ◽  
Fouad Chiadmi ◽  
Salvatore Cisternino ◽  
Jean-Eudes Fontan ◽  
Joël Schlatter
Keyword(s):  
High Performance ◽  
Degradation Products ◽  
Potassium Dihydrogen Phosphate ◽  
Reversed Phase ◽  
Hplc Method ◽  
Forced Degradation ◽  
Dihydrogen Phosphate ◽  
Stability Indicating ◽  
Rp Hplc

A stability-indicating reversed-phase high performance liquid chromatography (RP-HPLC) method was developed for the determination of betaxolol hydrochloride, a drug used in the treatment of hypertension and glaucoma. The desired chromatographic separation was achieved on a Nucleosil C18, 4 μm (150 × 4.6 mm) column, using isocratic elution at a 220 nm detector wavelength. The optimized mobile phase consisted of a 0.02 M potassium dihydrogen phosphate: methanol (40:60, v/v, pH 3.0 adjusted with o-phosphoric acid) as solvent. The flow rate was 1.6 mL/min and the retention time of betaxolol hydrochloride was 1.72 min. The linearity for betaxolol hydrochloride was in the range of 25 to 200 μg/mL. Recovery for betaxolol hydrochloride was calculated as 100.01%-101.35%. The stability-indicating capability was established by forced degradation experiments and the separation of unknown degradation products. The developed RP-HPLC method was validated according to the International Conference on Harmonization (ICH) guidelines. This validated method was applied for the estimation of betaxolol hydrochloride in commercially available tablets.

scholarly journals Simultaneous Determination of Preservatives (Methyl Paraben and Propyl Paraben) in Sucralfate Suspension Using High Performance Liquid Chromatography

2011 ◽  
Vol 8 (1) ◽  
pp. 340-346 ◽  
Author(s):  
Rajesh M. Kashid ◽  
Santosh G. Singh ◽  
Shrawan Singh
Keyword(s):  
High Performance Liquid Chromatography ◽  
Simultaneous Determination ◽  
Mobile Phase ◽  
High Performance ◽  
Reversed Phase ◽  
Hplc Method ◽  
Reversed Phase Hplc ◽  
Methyl Paraben ◽  
Propyl Paraben

A reversed phase HPLC method that allows the separation and simultaneous determination of the preservatives methyl paraben (M.P.) and propyl paraben (P.P.) is described. The separations were effected by using an initial mobile phase of water: acetonitrile (50:50) on Inertsil C18 to elute P.P. and M.P. The detector wavelength was set at 205 nm. Under these conditions, separation of the two components was achieved in less than 10 min. Analytical characteristics of the separation such as precision, specificity, linear range and reproducibility were evaluated. The developed method was applied for the determination of preservative M.P. and P.P. at concentration of 0.01 mg/mL and 0.1 mg/mL respectively. The method was successfully used for determining both compounds in sucralfate suspension.

Development and validation of a fast and simple HPLC method for the simultaneous determination of aniline and its degradation products in wastewater

2016 ◽  
Vol 8 (30) ◽  
pp. 5949-5956 ◽  
Author(s):  
Soumia Boulahlib ◽  
Ali Boudina ◽  
Kahina Si-Ahmed ◽  
Yassine Bessekhouad ◽  
Mohamed Trari
Keyword(s):  
High Performance ◽  
Degradation Products ◽  
Reversed Phase ◽  
Hplc Method ◽  
Array Detector ◽  
Simple Method ◽  
Photodiode Array Detector ◽  
Photodiode Array ◽  
Development And Validation

In this study, a rapid and simple method based on reversed-phase high performance liquid chromatography (RP-HPLC) using a photodiode array detector (PDA) for the simultaneous analysis of five pollutants including aniline and its degradation products, para-aminophenol, meta-aminophenol, ortho-aminophenol and phenol, was developed.

scholarly journals DEVELOPMENT AND VALIDATION OF STABILITY INDICATING RP-HPLC METHOD FOR DETERMINATION OF β-ACETYLDIGOXIN

2016 ◽  
Vol 9 (1) ◽  
pp. 54
Author(s):  
Megha Sharma ◽  
Neeraj Mahindroo
Keyword(s):  
High Performance ◽  
Degradation Products ◽  
Hplc Method ◽  
Stability Study ◽  
Array Detector ◽  
Forced Degradation ◽  
Simple Method ◽  
Stability Indicating ◽  
Rp Hplc

Objective: The objective of the present study was to develop and validate a novel stability indicating reverse phase-high performance liquid chromatography (RP-HPLC) method for determination of β-acetyldigoxin, an active pharmaceutical ingredient (API).Methods: The chromatographic separation was carried out on Agilent Technologies 1200 series HPLC system equipped with photo diode array detector and C-18 (4.6x250 mm, 5 µ) column. The mobile phase consisted of water: acetonitrile (65:35 v/v), delivered at a flow rate of 1.5 ml/min and eluents were monitored at 225 nm.Results: The retention time of β-acetyldigoxin was 9.2 min. The method was found to be linear (R2= 0.9995) in the range of 31.25-500 µg/ml. The accuracy studies showed the mean percent recovery of 101.02%. LOD and LOQ were observed to be 0.289 µg/ml and 0.965 µg/ml, respectively. The method was found to be robust and system suitability testing was also performed. Forced degradation analysis was carried out under acidic, alkaline, oxidative and photolytic stress conditions. Significant degradation was observed under tested conditions, except for oxidative condition. The method was able to separate all the degradation products within runtime of 20 min and was able to determine β-acetyldigoxin unequivocally in presence of degradation products.Conclusion: The novel, economic, rapid and simple method for analysis of β-acetyldigoxin is reported. The developed method is suitable for routine quality control and its determination as API, and in pharmaceutical formulations and stability study samples.

scholarly journals Stability-Indicating Validated HPLC Method for Simultaneous Determination of Oral Antidiabetic Drugs from Thiazolidinedione and Sulfonylurea Groups in Combined Dosage Forms

2010 ◽  
Vol 93 (4) ◽  
pp. 1086-1092 ◽  
Author(s):  
Anna Gumieniczek ◽  
Anna Berecka ◽  
ukasz Komsta
Keyword(s):  
Simultaneous Determination ◽  
Mobile Phase ◽  
Uv Light ◽  
Degradation Products ◽  
Dosage Forms ◽  
Hplc Method ◽  
Base Temperature ◽  
Stability Indicating ◽  
Acid And Base

Abstract For type 2 diabetes treatment, combinations of drugs from the thiazolidinedione and sulfonylurea groups are now available in the same tablet or capsule. Therefore, a stability-indicating and validated HPLC method was developed for simultaneous determination of pioglitazone, rosiglitazone, and glipizide in combined dosage forms. The examined drugs were subjected to different conditions such as acid and base, temperature, and UV light, and degradation of pioglitazone and glipizide was observed under thermal and acidic stress. However, selectivity of the presented method for pioglitazone, rosiglitazone, and glipizide assay against their degradation products was confirmed. It was also demonstrated to be robust, resisting small deliberate changes in pH of the buffer, flow rate, and percentage of acetonitrile in the mobile phase. The presented method utilizes a LiChrospher RP18 column (125 4.0 mm), acetonitrile in phosphate buffer at pH 4.3 (40 + 60, v/v) as the mobile phase, and UV detection at 225 nm for pioglitazone/glipizide or 245 nm for rosiglitazone/glipizide. The method was validated with respect to linearity, precision, and accuracy. Finally, the elaborated procedure was applied for the QC of pioglitazone/glipizide and rosiglitazone/glipizide mixtures.

scholarly journals Simultaneous Determination of Eight Synthetic Permitted and Five Commonly Encountered Nonpermitted Food Colors in Various Food Matrixes by High-Performance Liquid Chromatography

2010 ◽  
Vol 93 (5) ◽  
pp. 1503-1514 ◽  
Author(s):  
Sumita Dixit ◽  
Subhash K Khanna ◽  
Mukul Das
Keyword(s):  
Simultaneous Determination ◽  
High Performance ◽  
High Sensitivity ◽  
Gradient Elution ◽  
Reversed Phase ◽  
Hplc Method ◽  
Food Category ◽  
Food Commodities ◽  
Food Colors

Abstract A simple and sensitive HPLC method has been developed for the simultaneous determination of eight permitted food colors and five commonly encountered nonpermitted colors in various food commodities, including sugar-, fat-, and starch-based food matrixes. The method uses a specific food category-based cleanup/treatment procedure before color extraction to avoid the interference of food matrixes, and to obtain the optimal color extraction. Analysis was performed on a reversed-phase C18 -Bondapak column with ammonium acetate and acetonitrile gradient elution as the mobile phase; a programmable max-specific visible detection was used to monitor colors to obtain the higher sensitivity and expanded scope needed for multicolor blends having diverse absorption maxima. All colors showed good linearity, with regression coefficients of 0.99740.9999. The LOD and LOQ values ranged from 0.01 to 0.12 mg/L, and from 0.04 to 0.83 mg/L or mg/kg, respectively. The intraday and interday precision tests produced good RSD values, and the recoveries from different food matrixes ranged from 82 to 104%. The method offers high sensitivity for analysis of a wide variety of food matrixes containing a broad scope of multicolor blends. Two nonpermitted colors, orange II and metanil yellow, were found. Also, a number of samples contained permitted colors at levels two-to seven-fold higher than those prescribed.

Sign in / Sign up

Export Citation Format

Share Document