Application of response surface methodology to the assay of gamma-glutamyltransferase.

1982 ◽  
Vol 28 (5) ◽  
pp. 1140-1143 ◽  
Author(s):  
J W London ◽  
L M Shaw ◽  
L Theodorsen ◽  
J H Stromme

Abstract Response surface methodology (RSM) offers an empirical approach to the study of clinical enzyme assays. Variables such as pH, which are difficult to characterize by using theoretical enzyme kinetics, are easily included in RSM formulations. In this investigation, we studied with RSM the change in the measured activity of gamma-glutamy-transferase (EC 2.3.2.2) as a function of changes in concentrations of donor (gamma-glutamyl-3-carboxy-4-nitroanilide) acceptor (glycylglycine), and pH. The study defined large ranges for these variables over which maximum enzyme activity is obtained: donor 6.6 to 10.2 mmol/L, acceptor 129 to 250 mmol/L, and pH 7.8 to 8.5. The RSM regression polynomial was as accurate as a previously determined enzyme kinetic equation for predicting the transferase activity from given reagent substrate concentrations. Although not yielding a mechanistic understanding of an enzyme assay, RSM studies do produce an operational understanding of how an assay functions.

2015 ◽  
Vol 2015 ◽  
pp. 1-6 ◽  
Author(s):  
Aishwarya Singh Chauhan ◽  
Arunesh Kumar ◽  
Nikhat J. Siddiqi ◽  
B. Sharma

Trichoderma spp. have been reported earlier for their excellent capacity of secreting extracellular α-galactosidase. This communication focuses on the optimization of culture conditions for optimal production of enzyme and its characterization. The evaluation of the effects of different enzyme assay parameters such as stability, pH, temperature, substrate concentrations, and incubation time on enzyme activity has been made. The most suitable buffer for enzyme assay was found to be citrate phosphate buffer (50 mM, pH 6.0) for optimal enzyme activity. This enzyme was fairly stable at higher temperature as it exhibited 72% activity at 60°C. The enzyme when incubated at room temperature up to two hours did not show any significant loss in activity. It followed Michaelis-Menten curve and showed direct relationship with varying substrate concentrations. Higher substrate concentration was not inhibitory to enzyme activity. The apparent Michaelis-Menten constant (Km), maximum rate of reaction (Vmax), Kcat, and catalytic efficiency values for this enzyme were calculated from the Lineweaver-Burk double reciprocal plot and were found to be 0.5 mM, 10 mM/s, 1.30 U mg−1, and 2.33 U mg−1 mM−1, respectively. This information would be helpful in understanding the biophysical and biochemical characteristics of extracellular α-galactosidase from other microbial sources.


1971 ◽  
Vol 17 (11) ◽  
pp. 1114-1122 ◽  
Author(s):  
C D Russell ◽  
E Cotlove

Abstract Rate equations and rate parameters are determined for the coupled-reaction assay for serum glutamic-oxaloacetic transaminase in which malic dehydrogenase is used. These are used to interpret observed curves of absorbance vs. time, to select optimum substrate concentrations, and to estimate nonrandom analytical errors. A simple, systematic, general approach is presented, which can readily be applied to other enzyme assays in which two or more reactions are coupled. It depends for its simplicity on access to an adequate computing facility.


2018 ◽  
Vol 7 (4.30) ◽  
pp. 377
Author(s):  
Zatul Iffah Mohd Arshad ◽  
Azura Amid

Recombinant bromelain is a protease that was partially purified using aqueous two-phase system (ATPS). The process variables (pH, PEG 6000 and potassium phosphate concentration) were optimized on enzyme activity and partition coefficient using response surface methodology (RSM) based on a face-centered central composite design (FCCCD) model. The optimum conditions for purification were at 18.47% [w/w] PEG6000 and 13% [w/w] potassium phosphate, pH 7.0 with enzyme activity was obtained as 0.272±0.0036 unit m/L, and partition coefficient as 1.394±0.093. The recombinant bromelain was preferentially partitioned into the top phase and the band was reduced in contrast to crude sample on SDS-PAGE gel.


2007 ◽  
Vol 141 (2-3) ◽  
pp. 187-201 ◽  
Author(s):  
Radhika Tatineni ◽  
Kiran Kumar Doddapaneni ◽  
Ravi Chandra Potumarthi ◽  
Lakshmi Narasu Mangamoori

Author(s):  
Manish Paul ◽  
Dipti Pravamayee Nayak ◽  
Hrudayanath Thatoi

Abstract Background Xylanase has long been recognized as a widely used industrially important enzyme. There are some bacterial species already reported to produce xylanase which have potent xylanolytic activity towards the use of this enzyme in the production of bioethanol from lignocellulosic biomass. In this view, an efficient xylanolytic bacterial strain was isolated and screened from the soil sample of Simlipal Biosphere Reserve. Enzymatic assay for the xylanase activity was evidenced from the most potent bacterial strain, and the culture condition was optimized for obtaining the maximum enzyme activity. The most potent xylanolytic strain was also identified using biochemical and molecular methods. Results Nineteen xylanolytic bacteria (SXB1-SXB19) were isolated from Simlipal forest soil samples following dilution plate technique using corn cob xylan-enriched nutrient agar medium and screened for their xylanase-producing ability. Among these isolates, SXB19 showed maximum xylanolytic potential with a halozone size of 2.5 cm as evident in the formation of prominent yellow patches surrounding its growth in xylan-enriched nutrient agar plate. In unoptimized condition, SXB19 showed the highest enzymatic activity of 22.5 IU/ml among the 19 bacterial strains. In order to optimize the culture conditions for maximizing the xylanase production, Box-Behnken design of response surface methodology (RSM) was used. Four variables such as incubation time, pH, substrate (corn cob xylan) concentration, and temperature were considered for the RSM optimization study. From the results, it is evident that in an optimized condition of incubation time 36 h, pH 6.0, xylan concentration 0.5%, and temperature 42.5 °C, the enzyme activity reached a maximum of 152 IU/ml with nearly 6.75 times increase from the unoptimised condition. Besides, xylanase production from SXB19 was considerable in the presence of xylan followed by starch, nitrogen source such as urea followed by yeast extract, and mineral ion sources such as KCl followed by MgSO4 and ZnSO4. From different biochemical tests, 16S rRNA gene sequencing, and phylogenetic analysis, the bacterial strain SXB19 was identified as Pseudomonas mohnii. Conclusion The isolation of Pseudomonas mohnii, a potent xylanolytic bacterium from Simlipal, is a new report which opens up an opportunity for industrial production of xylanase for bioethanol production and other applications. Graphical abstract


2019 ◽  
Vol 7 (2) ◽  
pp. 243
Author(s):  
Ambar Kusumaningrum ◽  
Ida Bagus Wayan Gunam ◽  
I Made Mahaputra Wijaya

This study aims to determine the optimal temperature and pH for the growth of cellulolytic bacterial isolates to produce high cellulase enzyme activity. This study used one potential cellulolytic bacterial isolate B2S8 which had the highest cellulose degradation value and highest cellulase enzyme activity in previous studies. Carboxymethyl Cellulose (CMC) was used as a substrate on growth media and enzyme activity test. Optimization of temperature and pH on cellulase enzyme activity was done by Response Surface Methodology (RSM) by Central Composite Design (CCD). The results using Response Surface Methodology (RSM) showed that the highest endoglucanase enzyme activity was at 36.9 ºC and pH 6.9 was equal to 0.0269 IU/mL. Keywords: cellulolytic bacteria, endoglucanase enzyme, activity, Response Surface Methodology.


Sign in / Sign up

Export Citation Format

Share Document