scholarly journals Genetic and physical analysis of double-strand break repair and recombination in Saccharomyces cerevisiae.

Genetics ◽  
1989 ◽  
Vol 122 (3) ◽  
pp. 519-534 ◽  
Author(s):  
N Rudin ◽  
E Sugarman ◽  
J E Haber

Abstract We have investigated HO endonuclease-induced double-strand break (DSB) recombination and repair in a LACZ duplication plasmid in yeast. A 117-bp MATa fragment, embedded in one copy of LACZ, served as a site for initiation of a DSB when HO endonuclease was expressed. The DSB could be repaired using wild-type sequences located on a second, promoterless, copy of LACZ on the same plasmid. In contrast to normal mating-type switching, crossing-over associated with gene conversion occurred at least 50% of the time. The proportion of conversion events accompanied by exchange was greater when the two copies of LACZ were in direct orientation (80%), than when inverted (50%). In addition, the fraction of plasmids lost was significantly greater in the inverted orientation. The kinetics of appearance of intermediates and final products were also monitored. The repair of the DSB is slow, requiring at least an hour from the detection of the HO-cut fragments to completion of repair. Surprisingly, the appearance of the two reciprocal products of crossing over did not occur with the same kinetics. For example, when the two LACZ sequences were in the direct orientation, the HO-induced formation of a large circular deletion product was not accompanied by the appearance of a small circular reciprocal product. We suggest that these differences may reflect two kinetically separable processes, one involving only one cut end and the other resulting from the concerted participation of both ends of the DSB.

1992 ◽  
Vol 12 (2) ◽  
pp. 563-575 ◽  
Author(s):  
N Sugawara ◽  
J E Haber

In the yeast Saccharomyces cerevisiae, a double-strand chromosome break created by the HO endonuclease is frequently repaired in mitotically growing cells by recombination between flanking homologous regions, producing a deletion. We showed that single-stranded regions were formed on both sides of the double-strand break prior to the formation of the product. The kinetics of the single-stranded DNA were monitored in strains with the recombination-deficient mutations rad52 and rad50 as well as in the wild-type strain. In rad50 mutants, single-stranded DNA was generated at a slower rate than in the wild type, whereas rad52 mutants generated single-stranded DNA at a faster rate. Product formation was largely blocked in the rad52 mutant. In the rad50 rad52 double mutant, the effects were superimposed in that the exonucleolytic activity was slowed but product formation was blocked. rad50 appears to act before or at the same stage as rad52. We constructed strains containing two ura3 segments on one side of the HO cut site and one ura3 region on the other side to characterize how flanking repeats find each other. Deletions formed preterentially between the homologous regions closest to the double-strand break. By varying the size of the middle ura3 segment, we determined that recombination initiated by a double-strand break requires a minimum homologous length between 63 and 89 bp. In these competition experiments, the frequency of recombination was dependent on the length of homology in an approximately linear manner.


1992 ◽  
Vol 12 (2) ◽  
pp. 563-575 ◽  
Author(s):  
N Sugawara ◽  
J E Haber

In the yeast Saccharomyces cerevisiae, a double-strand chromosome break created by the HO endonuclease is frequently repaired in mitotically growing cells by recombination between flanking homologous regions, producing a deletion. We showed that single-stranded regions were formed on both sides of the double-strand break prior to the formation of the product. The kinetics of the single-stranded DNA were monitored in strains with the recombination-deficient mutations rad52 and rad50 as well as in the wild-type strain. In rad50 mutants, single-stranded DNA was generated at a slower rate than in the wild type, whereas rad52 mutants generated single-stranded DNA at a faster rate. Product formation was largely blocked in the rad52 mutant. In the rad50 rad52 double mutant, the effects were superimposed in that the exonucleolytic activity was slowed but product formation was blocked. rad50 appears to act before or at the same stage as rad52. We constructed strains containing two ura3 segments on one side of the HO cut site and one ura3 region on the other side to characterize how flanking repeats find each other. Deletions formed preterentially between the homologous regions closest to the double-strand break. By varying the size of the middle ura3 segment, we determined that recombination initiated by a double-strand break requires a minimum homologous length between 63 and 89 bp. In these competition experiments, the frequency of recombination was dependent on the length of homology in an approximately linear manner.


2007 ◽  
Vol 28 (3) ◽  
pp. 897-906 ◽  
Author(s):  
Thomas J. Pohl ◽  
Jac A. Nickoloff

ABSTRACT Homologous recombination (HR) is critical for DNA double-strand break (DSB) repair and genome stabilization. In yeast, HR is catalyzed by the Rad51 strand transferase and its “mediators,” including the Rad52 single-strand DNA-annealing protein, two Rad51 paralogs (Rad55 and Rad57), and Rad54. A Rad51 homolog, Dmc1, is important for meiotic HR. In wild-type cells, most DSB repair results in gene conversion, a conservative HR outcome. Because Rad51 plays a central role in the homology search and strand invasion steps, DSBs either are not repaired or are repaired by nonconservative single-strand annealing or break-induced replication mechanisms in rad51Δ mutants. Although DSB repair by gene conversion in the absence of Rad51 has been reported for ectopic HR events (e.g., inverted repeats or between plasmids), Rad51 has been thought to be essential for DSB repair by conservative interchromosomal (allelic) gene conversion. Here, we demonstrate that DSBs stimulate gene conversion between homologous chromosomes (allelic conversion) by >30-fold in a rad51Δ mutant. We show that Rad51-independent allelic conversion and break-induced replication occur independently of Rad55, Rad57, and Dmc1 but require Rad52. Unlike DSB-induced events, spontaneous allelic conversion was detected in both rad51Δ and rad52Δ mutants, but not in a rad51Δ rad52Δ double mutant. The frequencies of crossovers associated with DSB-induced gene conversion were similar in the wild type and the rad51Δ mutant, but discontinuous conversion tracts were fivefold more frequent and tract lengths were more widely distributed in the rad51Δ mutant, indicating that heteroduplex DNA has an altered structure, or is processed differently, in the absence of Rad51.


Genetics ◽  
1999 ◽  
Vol 153 (2) ◽  
pp. 573-583 ◽  
Author(s):  
Henriette M Foss ◽  
Kenneth J Hillers ◽  
Franklin W Stahl

AbstractSalient features of recombination at ARG4 of Saccharomyces provoke a variation of the double-strand-break repair (DSBR) model that has the following features: (1) Holliday junction cutting is biased in favor of strands upon which DNA synthesis occurred during formation of the joint molecule (this bias ensures that cutting both junctions of the joint-molecule intermediate arising during DSBR usually leads to crossing over); (2) cutting only one junction gives noncrossovers; and (3) repair of mismatches that are semirefractory to mismatch repair and/or far from the DSB site is directed primarily by junction resolution. The bias in junction resolution favors restoration of 4:4 segregation when such mismatches and the directing junction are on the same side of the DSB site. Studies at HIS4 confirmed the predicted influence of the bias in junction resolution on the conversion gradient, type of mismatch repair, and frequency of aberrant 5:3 segregation, as well as the predicted relationship between mismatch repair and crossing over.


Genetics ◽  
1995 ◽  
Vol 140 (1) ◽  
pp. 67-77 ◽  
Author(s):  
A Parket ◽  
O Inbar ◽  
M Kupiec

Abstract The Ty retrotransposons are the main family of dispersed repeated sequences in the yeast Saccharomyces cerevisiae. These elements are flanked by a pair of long terminal direct repeats (LTRs). Previous experiments have shown that Ty elements recombine at low frequencies, despite the fact that they are present in 30 copies per genome. This frequency is not highly increased by treatments that cause DNA damage, such as UV irradiation. In this study, we show that it is possible to increase the recombination level of a genetically marked Ty by creating a double-strand break in it. This break is repaired by two competing mechanisms: one of them leaves a single LTR in place of the Ty, and the other is a gene conversion event in which the marked Ty is replaced by an ectopically located one. In a strain in which the marked Ty has only one LTR, the double-strand break is repaired by conversion. We have also measured the efficiency of repair and monitored the progression of the cells through the cell-cycle. We found that in the presence of a double-strand break in the marked Ty, a proportion of the cells is unable to resume growth.


2005 ◽  
Vol 86 (3) ◽  
pp. 185-191 ◽  
Author(s):  
PETTER PORTIN

The effect was investigated of the hypomorphic DNA double-strand break repair, notably synthesis-dependent strand annealing, deficient mutation mus309 on the third chromosome of Drosophila melanogaster on intergenic and intragenic meiotic recombination in the X chromosome. The results showed that the mutation significantly increases the frequency of intergenic crossing over in two of three gene intervals of the X chromosome studied. Interestingly the increase was most prevalent in the tip of the X chromosome where crossovers normally are least frequent per physical map unit length. In particular crossing over interference was also affected, indicating that the effect of the mus309 mutation involves preconditions of crossing over but not the event of crossing over itself. On the other hand, the results also show that most probably the mutation does not have any effect on intragenic recombination, i.e. gene conversion. These results are fully consistent with the present molecular models of meiotic crossing over initiated by double-strand breaks of DNA followed by formation of a single-end-invasion intermediate, or D-loop, which is subsequently processed to generate either crossover or non-crossover products involving formation of a double Holliday junction. In particular the results suggest that the mus309 gene is involved in resolution of the D-loop, thereby affecting the choice between double-strand-break repair (DSBR) and synthesis-dependent strand annealing (SDSA) pathways of meiotic recombination.


2019 ◽  
Vol 21 (1) ◽  
pp. 125
Author(s):  
Francesca Troilo ◽  
Francesca Malagrinò ◽  
Lorenzo Visconti ◽  
Angelo Toto ◽  
Stefano Gianni

SH2 domains are protein domains that modulate protein–protein interactions through a specific interaction with sequences containing phosphorylated tyrosines. In this work, we analyze the folding pathway of the C-terminal SH2 domain of the p85 regulatory subunit of the protein PI3K, which presents a proline residue in a cis configuration in the loop between the βE and βF strands. By employing single and double jump folding and unfolding experiments, we demonstrate the presence of an on-pathway intermediate that transiently accumulates during (un)folding. By comparing the kinetics of folding of the wild-type protein to that of a site-directed variant of C-SH2 in which the proline was replaced with an alanine, we demonstrate that this intermediate is dictated by the peptidyl prolyl cis-trans isomerization. The results are discussed in the light of previous work on the effect of peptidyl prolyl cis-trans isomerization on folding events.


Genetics ◽  
2004 ◽  
Vol 168 (3) ◽  
pp. 1539-1555 ◽  
Author(s):  
Erin C. Birmingham ◽  
Shauna A. Lee ◽  
Richard D. McCulloch ◽  
Mark D. Baker

Sign in / Sign up

Export Citation Format

Share Document