254 Evaluation of Different Corn Milling Methods for High-moisture and Dry Corn on Finishing Cattle Performance and Carcass Characteristics

2021 ◽  
Vol 99 (Supplement_1) ◽  
pp. 124-124
Author(s):  
Caitlin A Coulson ◽  
Braden Troyer ◽  
Levi J McPhillips ◽  
Mitch Norman ◽  
Galen E Erickson
Keyword(s):  
Feed Efficiency ◽  
Carcass Characteristics ◽  
Hammer Mill ◽  
High Moisture ◽  
Roller Mill ◽  
Finishing Cattle ◽  
Respective Treatment ◽  
Milling Method ◽  
Daily Gain ◽  
High Moisture Corn

Abstract Steers (n=600; Initial BW = 402 ± 17 kg) were fed for134 day to evaluate the effect of milling method and corn type on performance and carcass characteristics. Treatments were evaluated as a 2 × 3 factorial with factors being milling method (Automatic Ag® roller mill or hammer mill) and corn type (100% high-moisture, 100% dry, or 50:50 blend of high-moisture and dry corn). High-moisture corn was processed at harvested based on respective treatment and ensiled until trial initiation. Both dry corn and HMC were processed using a 16-mm screen in the hammer mill and the roller mill was adjusted to ensure all kernels were broken. There were no interactions between milling method and corn type for final BW, daily gain (ADG), or dry matter intake (DMI; P ≥ 0.32), but there was a tendency for an interaction for G:F (P = 0.09). Cattle fed 100% high-moisture corn processed with the Automatic Ag roller mill were 4.7% more efficient (P ≤ 0.01) with 55% lower fecal starch (P < 0.01) compared to high-moisture corn processed with the hammer mill. Cattle fed dry corn tended (P = 0.07) to have a greater live final BW regardless of milling type and had the greatest DMI (P ≤ 0.01) Intake decreased as high-moisture corn was increased in the diet. Due to no differences in ADG with lower DMI led to a 6% improvement (P ≤ 0.01) in G:F for steers fed HMC. There were no further effects (P ≥ 0.14) on performance or carcass traits regardless of milling method or corn type. Processing high-moisture corn using Automatic Ag roller mill improved feed efficiency compared to processing with a hammer mill when corn was included at 70% of the diet, but processing method had little effect when fed as dry corn or blended diets.

255 Evaluation of Different Corn Milling Methods for High-moisture and Dry Corn on Nutrient Digestion

2021 ◽  
Vol 99 (Supplement_1) ◽  
pp. 124-125
Author(s):  
Caitlin A Coulson ◽  
Nicole Woita ◽  
Tyler Spore ◽  
Hannah Wilson ◽  
Kylie Butterfield ◽  
...  
Keyword(s):  
Dry Matter ◽  
Milling Process ◽  
Nutrient Digestibility ◽  
Hammer Mill ◽  
High Moisture ◽  
Roller Mill ◽  
Nutrient Digestion ◽  
Milling Method ◽  
Feeding Diets ◽  
Effect Of Feeding

Abstract A 2 × 2 factorial digestion study using seven ruminally cannulated steers evaluated the effect of feeding diets containing 70% (dry matter-basis) high-moisture (HMC) or dry corn (DC), processed with either a hammer mill or Automatic Ag Roller Mill (Pender, NE), on nutrient digestion. Feeding HMC decreased the amount of excreted dry matter (DM) and organic matter (OM; P ≤ 0.01) regardless of mill type, but there was a tendency (P ≤ 0.13) for an interaction between corn type and mill type for DM and OM digestibility. There was no difference between either milling treatments fed as HMC (P ≥ 0.69), but the hammer mill DC diet was more digestible than the roller mill DC (P = 0.05). There was no effect on NDF digestibility, but there was a tendency for an interaction between grain type and processing method for ADF digestibility, with the roller mill DC diet having the lowest (P = 0.02) ADF digestibility and no differences (P ≥ 0.15) among the other treatments. As expected, HMC based diets had greater (P < 0.01) starch digestibility compared to DC, but milling method had no effect (P = 0.56). High moisture corn diets had greater (P = 0.01) DE intake (Mcal/kg), and hammer mill DC tended to be greater (P = 0.07) than roller mill DC. There tended (P = 0.07) to be an interaction for minimum pH, with roller mill HMC and hammer mill DC having the lowest average pH, but not different from hammer mill HMC (P ≥ 0.32). There were no differences (P = 0.56) in average pH, but HMC diets had greater variance (P = 0.04) and greater area under pH 5.6 (P = 0.05) compared to DC based diets. Feeding cattle HMC compared to DC increases nutrient digestibility but milling process had little impact.

MONENSIN FED TO GROWING AND FINISHING CATTLE

1977 ◽  
Vol 57 (4) ◽  
pp. 769-773 ◽  
Author(s):  
D. N. MOWAT ◽  
J. W. WILTON ◽  
J. G. BUCHANAN-SMITH
Keyword(s):  
Acetic Acid ◽  
Feed Efficiency ◽  
Carcass Characteristics ◽  
Corn Silage ◽  
Ruminal Fermentation ◽  
High Moisture ◽  
Molar Percentage ◽  
Finishing Cattle ◽  
Weight Gains ◽  
Alfalfa Silage

Two experiments were conducted to evaluate the effects of monensin with growing and finishing cattle. In experiment 1, 80 Hereford steer calves were fed two different silage rations. With alfalfa silage, monensin increased weight gains (+12%) and feed efficiency (P < 0.05) (+11%). When high moisture (HM) shelled corn was fed along with alfalfa silage, monensin had no effect on weight gains, but increased feed efficiency (P < 0.05) (+12%) largely by decreasing (P > 0.05) feed intake. In experiment 2, 72 steer and heifer crossbred calves were fed corn silage for 112 days followed by high levels of HM shelled corn through to marketing at a constant finish. Over an average total of 258 days on feed, monensin increased (P < 0.05) rate of gain (+9%) as well as feed efficiency (+13%). Monensin produced no effects on carcass characteristics. At least part of the improvement in feed efficiency could be attributed to altered ruminal fermentation. Molar percentage of propionic acid was increased (P < 0.05) and butyric and acetic acid decreased (P < 0.05) with monensin feeding.

scholarly journals 227 Impact of feeding Aspergillus subspecies (ssp.) blend and different corn processing methods on finishing beef cattle performance and carcass characteristics

2020 ◽  
Vol 98 (Supplement_3) ◽  
pp. 136-137
Author(s):  
Stacia M Hopfauf ◽  
Bradley M Boyd ◽  
Levi J McPhillips ◽  
Galen E Erickson
Keyword(s):  
Feed Efficiency ◽  
Block Design ◽  
Average Daily Gain ◽  
Carcass Characteristics ◽  
Beef Steers ◽  
High Moisture ◽  
Randomized Block Design ◽  
Main Effect ◽  
Corn Processing ◽  
High Moisture Corn

Abstract The objective of this study was to evaluate the effect of feeding Aspergillus ssp. blend in combination with dry-rolled (DRC) or high-moisture corn (HMC) based finishing diets on performance and carcass characteristics. Crossbred beef steers (n = 320; initial BW = 267 ± 9 kg) were utilized in a generalized randomized block design. Cattle were assigned randomly to pens by initial body weight (BW) and pens were assigned randomly to one of four treatments with 8 pens per treatment for simple effect means. Treatments were set up as a 2 × 2 factorial arrangement with factors consisting of corn processing and 0 g / steer daily or 10 g / steer daily Aspergillus ssp. blend. There were no significant interactions (P ≥ 0.23) observed between corn processing and Aspergillus ssp. blend in the diet; therefore, only main effects are discussed. For the main effect of Aspergillus ssp. blend; no significant differences were observed for dry-matter intake (DMI), average daily gain (ADG), feed efficiency (G:F), hot carcass weight (HCW), or carcass traits (P ≥ 0.78). Cattle fed Aspergillus ssp. blend had a greater 12th rib fat (P = 0.05). For the main effect of corn processing, cattle fed DRC had heavier HCW and final BW (P = 0.04), greater ADG (P = 0.05), and greater DMI (P &lt; 0.01). However, steers fed HMC had greater G:F (P &lt; 0.01) compared to DRC. These data suggest that feeding Aspergillus ssp. blend in either with dry-rolled or high moisture corn diets did not significantly improve performance or carcass characteristics in finishing beef steers. While feeding HMC improved feed efficiency compared to DRC, feeding DRC increased ADG (and also DMI) compared to HMC.

scholarly journals 401 Effect of zinc source and ractopamine hydrochloride on the growth performance and carcass characteristics of steers fed in confinement to harvest

2019 ◽  
Vol 97 (Supplement_3) ◽  
pp. 160-160
Author(s):  
John Wagner ◽  
William T Nelson ◽  
Terry Engle ◽  
Jerry Spears ◽  
Jeff Heldt ◽  
...  
Keyword(s):  
Feed Efficiency ◽  
Average Daily Gain ◽  
Carcass Characteristics ◽  
Feedlot Cattle ◽  
Beef Steers ◽  
Live Animal ◽  
Zinc Source ◽  
Dressing Percentage ◽  
Ractopamine Hydrochloride ◽  
Daily Gain

Abstract Four hundred and thirty-two beef steers (346.3 ± 63.7 kg BW) were used to determine the effects of Zn source on feedlot cattle fed ractopamine hydrochloride. Cattle were blocked in groups of 54 by BW and housed in 48 pens containing 9 steers per pen. Pens within a weight block were randomly assigned to treatments in a 2 x 3 factorial arrangement, with factors being: 1) 0 or 30.1 mg of ractopamine HCl/kg DM fed during the final 29 days on feed; and 2) Zn source: 90 mg of supplemental Zn/kg DM from ZnSO4; Zn sulfate (67%) + Zn methionine (33%); and Zn from Zn hydroxychloride, fed through the entire feeding period. Cattle were fed a high concentrate finishing diet for 154 d and slaughtered at a commercial abattoir. Average daily gain, DMI, feed efficiency and carcass characteristics were determined after slaughter. Zinc source had no impact on live animal performance. Cattle fed ractopamine HCl had greater (P &lt; 0.01) final BW, greater (P &lt; 0.001) ADG, improved (P &lt; 0.001) G:F, heavier (P &lt; 0.01) HCW, and larger (P &lt; 0.05) longissimus muscle compared to non-ractopamine supplemented steers. There was a Zn source by ractopamine interaction (P &lt; 0.01) for dressing percentage. Cattle receiving ractopamine HCl with Zn hydroxychloride had a greater dressing percentage (P &lt; 0.05) when compared to ractopamine HCl cattle fed other Zn sources. Cattle receiving ractopamine HCl with Zn sulfate had a lesser dressing percentage (P &lt; 0.05) when compared to ractopamine HCl cattle fed other Zn sources. Additional Zn source by ractopamine HCl interactions were not significant. These data indicate that Zn source has minimal impacts on feedlot steer performance and carcass characteristics when supplemented to cattle receiving 0.0 or 30.1 mg of ractopamine HCl/kg DM.

scholarly journals Effects of Syngenta Enogen Feed Corn containing an α-amylase trait on finishing cattle performance and carcass characteristics1

2018 ◽  
Vol 3 (1) ◽  
pp. 504-512 ◽  
Author(s):  
M L Jolly-Breithaupt ◽  
M E Harris ◽  
B L Nuttelman ◽  
D B Burken ◽  
J C MacDonald ◽  
...  
Keyword(s):  
Feed Efficiency ◽  
Carcass Characteristics ◽  
Feedlot Performance ◽  
Finishing Cattle ◽  
Main Effect ◽  
University Of Nebraska Lincoln ◽  
The University ◽  
Extension Center ◽  
Enzyme Supplement ◽  
Corn Hybrid

Abstract Two experiments evaluated the effects of feeding a new corn hybrid, containing an α-amylase enzyme trait, Syngenta Enogen Feed Corn (SYT-EFC), on feedlot performance and carcass characteristics at two locations. Experiment 1 utilized 300 calffed steers (298.5 ± 16.3 kg of BW) at the University of Nebraska–Lincoln Eastern Nebraska Research and Extension Center Mead, NE. Treatments were designed as a 2 × 2 + 1–factorial arrangement with factors consisting of 1) corn type (SYT-EFC or conventional [CON]) and 2) byproduct type (with or without Sweet Bran [SB]), or a BLEND of STY-EFC and CON without SB. In Exp. 2, 240 crossbred, calf-fed steers (287.6 ± 15.4 kg of BW) were utilized at the University of Nebraska–Lincoln Panhandle Research and Extension Center near Scottsbluff, NE. Steers were fed SYT-EFC, CON, BLEND, or CON with a commercial α-amylase enzyme supplement (CON-E). In Exp. 1, there was an interaction for ADG (P = 0.05) and G:F (P = 0.02). Steers fed SYT-EFC with SB had greater ADG and G:F than CON; however, in diets without SB, SYT-EFC and CON were not different resulting in a 10.1% change in G:F when steers were fed SYT-EFC in SB compared with CON and only 1.6% change between SYT-EFC and CON without SB. Energy values, based on performance data, resulted in a 6.5% and 8.3% change in NEm and NEg, respectively, for steers fed SYT-EFC and CON with SB and 1.6% change for both NEm and NEg for steers fed SYT-EFC and CON without SB. For the main effect of corn trait, steers fed SYT-EFC had greater marbling scores, fat depth, and calculated yield grade compared with CON (P ≤ 0.03). In diets without SB, there was no difference between SYT-EFC, CON, or BLEND for DMI, final BW, ADG, G:F, NEm, or NEg (P ≥ 0.35). In Exp. 2, cattle fed SYT-EFC, BLEND, or CON-E had greater final BW, ADG, and G:F than cattle fed CON (P ≤ 0.03). On average, NEm and NEg were 4.9% and 7.0% greater, respectively, for steers fed amylase enzyme treatments compared with CON (P ≤ 0.01). Hot carcass weights were greater in steers fed α-amylase treatments compared with CON (P &lt; 0.01). Feeding Syngenta Enogen Feed Corn, which contains an α-amylase enzyme trait, at both locations improved feed efficiency in finishing cattle diets containing WDGS or SB.

scholarly journals Effects of restricted feeding and re-alimentation of dietary protein or energy on compensatory growth of sheep

1970 ◽  
Vol 47 (3) ◽  
pp. 389-396
Author(s):  
W. Addah ◽  
A. Ayantunde ◽  
E.K. Okine
Keyword(s):  
Growth Performance ◽  
Dietary Protein ◽  
Feed Efficiency ◽  
Average Daily Gain ◽  
Carcass Characteristics ◽  
High Energy ◽  
Utilization Efficiency ◽  
Eating Quality ◽  
Nutrient Utilization Efficiency ◽  
Daily Gain

The study investigated the effects of re-alimenting dietary protein or energy on growth, carcass characteristics and meat eating quality parameters of sheep. Twenty-seven intact rams (~9 months; 11.3 ± 0.5 kg) were randomly divided into three groups. Each group was fed a maintenance diet (MT) containing, on dry matter (DM) basis, 105 g/kg crude protein (CP) and 8.4 MJ/kg DM metabolizable energy (ME) for 30 days. Thereafter, they were continually fed the same MT or re-alimented with a high protein diet (HP) containing 169 g/kg DM CP and 9.3 MJ/kg ME or a high energy diet (HE) containing 123 g/kg DM CP and 10.6 MJ/kg ME for an additional 30 days to determine the effects of re-alimentation of protein or energy on their growth performance and carcass characteristics. During the initial 30-day period, DM intake (DMI) and growth performance were similar among the three groups. However, upon re-alimentation, average daily gain (ADG) and feed efficiency of sheep re-alimented with HP were greater than those maintained continually on MT or re-alimented with HE. Sheep on HP had higher feed efficiency, ADG and heavier carcasses than those fed MT or re-alimented with HE during the whole 60-day period. Growth of most viscera was less responsive to the restriction-re-alimentation feeding regimen except for the weights of the lungs, heart and intestines. Meat from sheep re-alimented with HE had a more intense ‘sheepy’ flavour than those fed MT or re-alimented with HP, but juiciness and tenderness were not affected. The higher ADG of sheep re-alimented with protein may be related more to enhanced efficiency of feed utilization than to higher DMI.Keywords: average daily gain, feed restriction, nutrient utilization efficiency, visceral organs

scholarly journals Effects of steroidal implants on feedlot performance, carcass characteristics, and serum and meat estradiol-17β concentrations of Holstein steers

2019 ◽  
Vol 4 (1) ◽  
pp. 206-213 ◽  
Author(s):  
Pedro Henrique Vilela Carvalho ◽  
George A Perry ◽  
Tara L Felix
Keyword(s):  
Feed Efficiency ◽  
Animal Health ◽  
Average Daily Gain ◽  
Carcass Characteristics ◽  
Feed Ratio ◽  
Longissimus Muscle ◽  
Feedlot Performance ◽  
Trenbolone Acetate ◽  
Daily Gain ◽  
Estradiol 17Β

Abstract The objectives of the study were to determine the effect of steroidal implants on growth performance, carcass characteristics, and estradiol-17β (E2) concentrations in the blood and longissimus muscle of Holstein steers fed a grain-based diet. Seventy Holstein steers (average initial BW = 275 ± 6.4 kg, 10 to 12 mo of age) were assigned to treatments: (i) implanted with 80 mg of trenbolone acetate (TBA) and 16 mg of E2 (Component TE-IS with Tylan; Elanco Animal Health, Greenfield, IN) at the start of the trial (day 0), and reimplanted with 120 mg of TBA and 24 mg of E2 (Component TE-S with Tylan; Elanco Animal Health) on day 84 of the experiment; or (ii) no implant. Implanted Holstein steers were heavier (P ≤ 0.01) than nonimplanted Holstein steers in the middle (day 84) and at the end of the experiment (day 186). Implanting Holstein steers increased (P &lt; 0.01) average daily gain (ADG) and dry matter intake (DMI) without affecting gain-to-feed ratio compared with nonimplanted animals. Carcasses from implanted Holstein steers had greater (P &lt; 0.01) hot carcass weight (HCW) and longissimus muscle (LM) area than carcasses from nonimplanted steers. Implanting did not affect (P ≥ 0.21) other carcass characteristics. There was an increase (P = 0.03) of 1.3 pg of E2/g of muscle in implanted Holstein steers compared with that from nonimplanted Holstein steers. There was an implant × day interaction (P &lt; 0.01) in serum E2 concentrations. Serum E2 concentrations were not altered in nonimplanted Holstein steers, whereas E2 concentration increased (P &lt; 0.01) after steers were implanted, regardless of implant characteristics. Serum E2 peaked at 28 days after the first implant and then rapidly declined after day 56. In summary, steroidal implants administered on days 0 and 84 increased DMI, ADG, HCW, and LM area in Holstein steers compared with nonimplanted steers due to increased serum E2 concentrations. However, these changes did not improve feed efficiency or other carcass characteristics.

scholarly journals Fibrolytic enzymes improve the nutritive value of high-moisture corn for finishing bulls

2020 ◽  
Vol 98 (2) ◽  
Author(s):  
Pedro Augusto Ribeiro Salvo ◽  
Viviane C Gritti ◽  
João Luiz Pratti Daniel ◽  
Leandro S Martins ◽  
Fernanda Lopes ◽  
...  
Keyword(s):  
Feed Efficiency ◽  
Nutritive Value ◽  
Energy Availability ◽  
Vitamin Supplement ◽  
Animal Performance ◽  
High Moisture ◽  
Fibrolytic Enzymes ◽  
High Moisture Corn

Abstract Exogenous fibrolytic enzymes (EFE) improve the energy availability of grains for nonruminant animals by reducing encapsulation of the endosperm nutrients within grain cell walls; however, these benefits are unknown in the treatment of corn-based silage for cattle. The objective of the present study was to evaluate the effects of adding EFE at ensiling on the nutritive value of high-moisture corn (HMC) and snaplage (SNAP) for finishing Nellore bulls. The EFE dose was 100 g/Mg fresh matter in both HMC and SNAP. Diets were 1) a SNAP + HMC control (without enzyme addition); 2) SNAP + HMC EFE (with enzymes); 3) a whole-plant corn silage (WPCS) + HMC control (without enzyme addition); and 4) WPCS + HMC EFE (with enzymes). In addition to the silages, the diets were also composed of soybean hulls, soybean meal, and mineral–vitamin supplement. The statistical design was a randomized complete block with a factorial arrangement of treatments, and the experiment lasted 122 d. For in situ and in vitro analyses, 2 cannulated dry cows were used. There was no interaction between the diets and EFE application (ADG, P = 0.92; DMI, P = 0.77; G:F, P = 0.70), and there was no difference between the SNAP and WPCS diets regarding the DMI (P = 0.53), ADG (P = 0.35), and feed efficiency (ADG:DMI, P = 0.83). Adding EFE to the HMC and SNAP at ensiling did not affect ADG but decreased DMI (P = 0.01), resulting in greater feed efficiency by 5.91% (P = 0.04) than that observed in animals fed diets without the addition of EFE. Addition of EFE to HMC resulted in reduced NDF content and increased in vitro and in situ DM digestibility compared with untreated HMC. No effects were found for the addition of EFE to SNAP. Fecal starch decreased with EFE application (P = 0.05). Therefore, the diet energy content (TDN, NEm, and NEg) calculated from animal performance increased (P = 0.01) with the addition of EFE to HMC. In conclusion, exchanging the NDF from WPCS with that from SNAP did not affect the performance of finishing cattle, whereas the addition of EFE to HMC at ensiling improved animal performance by increasing the energy availability of the grain.

INFLUENCE OF HIGH-MOISTURE BARLEY ON THE PERFORMANCE AND CARCASS CHARACTERISTICS OF FEEDLOT CATTLE

1988 ◽  
Vol 68 (3) ◽  
pp. 811-820 ◽  
Author(s):  
J. J. KENNELLY ◽  
G. W. MATHISON ◽  
G. de BOER
Keyword(s):  
Dry Matter ◽  
Free Choice ◽  
Average Daily Gain ◽  
Carcass Characteristics ◽  
Barley Grain ◽  
Feedlot Cattle ◽  
Feed Conversion ◽  
High Moisture ◽  
Feeding Value ◽  
Daily Gain

Three factorial experiments were conducted to determine the relative feeding value of dry barley (DB) and high-moisture barley (HMB), and to evaluate the influence of method of ensiling (Pit vs. Harvestore® (HAV) silo), source of roughage (hay vs. silage), and level of concentrate (90 vs. 75%) on the performance and carcass characteristics of feedlot cattle. In exp. 1, 252 steers (initial wt 357 kg) were assigned on the basis of weight to six treatments (two pens × 21 animals per pen). A mixed diet consisting of 85.2% barley grain (dry matter (DM) basis) was offered free choice. The barley portion of the ration consisted of either 0, 25, 50, 75 or 100% DB with the balance being HMB from a pit silo. The sixth treatment consisted of feeding 100% HMB for the first 57 d and 100% DB for the remainder of the trial. Overall average daily gain (ADG) for steers fed 100% DB (1.70 kg d−1) was significantly higher than observed for animals fed 100, 75 or 50% HMB (1.46, 1.49 and 1.56 kg d−1, respectively). The kg of feed DM required per kg gain (FC) varied between 5.76 and 7.13 and was not (P > 0.05) influenced by treatment. No differences (P > 0.05) were observed in carcass characteristics. In exp. 2, 360 steers (initial wt 340 kg) were allotted on the basis of weight to six treatments designed to evaluate the effect of source (Pit vs. HAV) and level of HMB, in diets containing 10.2% silage, on animal performance. Overall ADG (1.11 – 1.17 kg d−1), FC (6.66 – 7.01) and carcass characteristics were similar (P > 0.05) for animals fed Pit HMB, HAV HMB and DB. In exp. 3, 264 weanling calves (initial wt 216 kg) were allotted on the basis of weight to six treatments which differed in type of barley (HMB vs. DB), source of roughage (hay vs. silage) and level of concentrate (75 vs. 90%; DM basis). The feeding period was 127 d. Daily gains varied between 0.78 and 0.91 kg d−1 and FC ranged from 6.40 to 7.10 and were not influenced (P > 0.05) by source of barley or source or level of roughage. While animals fed DB had significantly higher ADG than those fed HMB in exp. 1, the overall results from the three experiments indicate that on a DM basis HMB has similar feeding value to DB, and that there is no major difference between Pit and HAV-stored HMB for feedlot cattle. Key words: High moisture, barley, cattle, gain, feed conversion

Sign in / Sign up

Export Citation Format

Share Document