scholarly journals Height-Diameter Equations for Thirteen Midwestern Bottomland Hardwood Species

2002 ◽  
Vol 19 (4) ◽  
pp. 171-176 ◽  
Author(s):  
Kenneth C. Colbert ◽  
David R. Larsen ◽  
James R. Lootens
Keyword(s):  
Tree Height ◽  
Average Height ◽  
Bottomland Hardwood ◽  
Bottomland Hardwood Forests ◽  
Des Moines ◽  
Hardwood Species ◽  
Riparian Tree ◽  
Regression Techniques ◽  
Using Data ◽  
Total Tree

Abstract Height-diameter equations are often used to predict the mean total tree height for trees when only diameter at breast height (dbh) is measured. Measuring dbh is much easier and is subject to less measurement error than total tree height. However, predicted heights only reflect the average height for trees of a particular diameter. In this study, we present a set of height-diameter equations for 13 riparian tree species using data obtained from bottomland hardwood forests along the Mississippi, Missouri, Illinois, and Des Moines rivers. Nonlinear regression techniques were used to develop the equations. The resulting equations provide a reasonable means of predicting unknown tree heights, given dbh, for these species.

Development of comandra blister rust on lodgepole pine

1990 ◽  
Vol 20 (2) ◽  
pp. 159-165 ◽  
Author(s):  
Brian W. Geils ◽  
William R. Jacobi
Keyword(s):  
Lodgepole Pine ◽  
Tree Height ◽  
Infection Site ◽  
Canker Disease ◽  
Susceptibility To Infection ◽  
Blister Rust ◽  
The Mean ◽  
Central Rocky Mountains ◽  
Stem Cankers ◽  
Total Tree

The comandra blister rust parasite (Cronartiumcomandrae Pk.) causes a serious canker disease of lodgepole pine (Pinuscontorta Dougl. ex Loud. ssp. latifolia (Engelm.) Critch.) in the central Rocky Mountains. The expansion, longevity, and distribution of comandra blister rust cankers were studied by annual monitoring, reconstructing canker histories, and random sampling. In saplings, infections occur throughout the lower 80% of the crown; and branch cankers expand toward the bole at 2.5 cm•year−1, regardless of temperature, age, position, tree size, vigor, or susceptibility to infection. The proportion of branch cankers that develop into stem cankers decreases logistically both with distance from infection site to bole and with time since infection. Fewer than 50% of branch cankers that are farther than 20 cm from the bole or more than 8 years old are expected to establish stem cankers. The proportion of branch cankers that become stem cankers decreases with distance more rapidly for comandra blister rust than for other stem rusts. The mean height of stem cankers increases with total tree height, but cankers are uncommon at the top of the crown and low on the trunk of larger trees. The number of years for a canker to girdle its host equals the diameter of the stem at the center of the canker measured in centimetres. Because girdling cankers develop infrequently, slowly, and predictably, potential losses from comandra blister rust can be reduced by timely and appropriate removal of damaged trees.

scholarly journals Growth and yield of teak stands at different spacing

2018 ◽  
Vol 53 (10) ◽  
pp. 1109-1118
Author(s):  
Reginaldo Antonio Medeiros ◽  
Haroldo Nogueira de Paiva ◽  
Flávio Siqueira D’Ávila ◽  
Helio Garcia Leite
Keyword(s):  
Growth Rate ◽  
Basal Area ◽  
Tree Height ◽  
Tectona Grandis ◽  
Growth And Yield ◽  
Mean Square ◽  
Randomized Design ◽  
Completely Randomized Design ◽  
Total Tree

Abstract: The objective of this work was to evaluate the growth and yield of teak (Tectona grandis) stands at different spacing and in different soil classes. Twelve spacing were evaluated in an Inceptisol and Oxisol, in plots with an area of 1,505 or 1,548 m2, arranged in a completely randomized design with nine replicates. The teak trees were measured at 26, 42, 50, and 78 months of age. Total tree height was less affected by spacing. Mean square diameter was greater in wider spacing, whereas basal area and total volume with bark were greater in closer spacing. An increase in volume with bark per tree was observed with the increase of useful area per plant. For teak trees, growth stagnation happens earlier, the growth rate is higher in closer spacing, and the plants grow more in the Inceptisol than in the Oxisol.

Relative abundance and species richness of cerambycid beetles in partial cut and uncut bottomland hardwood forests

2009 ◽  
Vol 39 (11) ◽  
pp. 2100-2108 ◽  
Author(s):  
Patti Newell ◽  
Sammy King
Keyword(s):  
Species Richness ◽  
Relative Abundance ◽  
Woody Debris ◽  
Hardwood Forests ◽  
Bottomland Hardwood ◽  
Partial Cutting ◽  
Bottomland Hardwood Forests ◽  
Dead Trees ◽  
Total Species Richness ◽  
Cerambycid Beetles

Partial cutting techniques are increasingly advocated and used to create habitat for priority wildlife. However, partial cutting may or may not benefit species dependent on deadwood; harvesting can supplement coarse woody debris in the form of logging slash, but standing dead trees may be targeted for removal. We sampled cerambycid beetles during the spring and summer of 2006 and 2007 with canopy malaise traps in 1- and 2-year-old partial cut and uncut bottomland hardwood forests of Louisiana. We captured a total of 4195 cerambycid beetles representing 65 species. Relative abundance was higher in recent partial cuts than in uncut controls and with more dead trees in a plot. Total species richness and species composition were not different between treatments. The results suggest partial cuts with logging slash left on site increase the abundance of cerambycid beetles in the first few years after partial cutting and that both partial cuts and uncut forest should be included in the bottomland hardwood forest landscape.

The Use of Soil Classes to Delineate Transition Zones in Bottomland Hardwood Forests: The Report of the Soils Workgroup

2020 ◽  
pp. 389-408
Author(s):  
B. Arville Touchet ◽  
Stephen Faulkner ◽  
Robert Heeren ◽  
David Kovacic ◽  
William Patrick ◽  
...  
Keyword(s):  
Hardwood Forests ◽  
Bottomland Hardwood ◽  
Transition Zones ◽  
Bottomland Hardwood Forests

scholarly journals Crown structure of Picea omorika trees in the plantation

2012 ◽  
Vol 64 (2) ◽  
pp. 605-611 ◽  
Author(s):  
M. Krstic ◽  
N. Stavretovic ◽  
V. Isajev ◽  
I. Bjelanovic
Keyword(s):  
Tree Height ◽  
Tree Crown ◽  
Crown Length ◽  
Crown Structure ◽  
Parabolic Function ◽  
Picea Omorika ◽  
Serbian Spruce ◽  
The Relationship ◽  
Total Tree ◽  
Stand Conditions

The study was carried out in Serbian spruce (Picea omorika Panc/Purkyn?) plantations in the western Serbia. The paper presents results of the analysis of crown development. The following elements were analyzed: total tree height, height of the crown base, absolute and relative crown length, maximal crown diameter, coefficient of crown spreading and degree of crown girth. We discuss approaches to the modeling of tree crown growth and development, growing under favorable environmental and stand conditions, without anomalies in development. In order to establish the relationship between analyzed factors, regression analyses were applied. Data fitting was by the analytic method, by the implementation of Prodan?s functions of growth, linear and parabolic function. Received models can be used for the simulation of various growth and developing processes in forest.

scholarly journals Comparison of Planted Loblolly and Slash Pine Performance in Southeast Texas

1993 ◽  
Vol 17 (1) ◽  
pp. 26-31 ◽  
Author(s):  
J. David Lenhart ◽  
Gary D. Kronrad ◽  
Michael S. Fountain
Keyword(s):  
Loblolly Pine ◽  
Tree Height ◽  
Pinus Elliottii ◽  
Slash Pine ◽  
Volume Index ◽  
Fusiform Rust ◽  
Tree Diameter ◽  
Stem Straightness ◽  
Southeast Texas ◽  
Total Tree

Abstract The performance of young (less than 10 yr) loblolly (Pinus taeda L.) and slash (Pinus elliottii Engelm.) pine trees was compared on planted sites in southeast Texas. Performance was compared for: total tree height; tree diameter; height to live tree crown; tree volume index,; incidenceof fusiform rust (Cronartium quercuum [Berk.] Miyabe ex Shirai f. sp. fusiforme); crookedness of stems; and survival rates. For these young trees, slash pine tended to perform better in southeast Texas than loblolly pine in total tree height, tree diameter, stem size, height to first livebranch and stem straightness. However, loblolly pine was less susceptible to fusiform rust than slash pine, and its mortality rate was lower than slash pine. However, based on the performance of these young plantations, a recommendation on the preferred pine species to plant in southeast Texasmight be premature. South. J. Appl. For. 17(1):26-31.

scholarly journals A Height–Diameter Curve for Longleaf Pine Plantations in the Gulf Coastal Plain

2009 ◽  
Vol 33 (4) ◽  
pp. 164-170 ◽  
Author(s):  
Daniel Leduc ◽  
Jeffery Goelz
Keyword(s):  
Longleaf Pine ◽  
Pinus Palustris ◽  
Tree Height ◽  
Growth And Yield ◽  
Average Height ◽  
Yield Model ◽  
Gulf Region ◽  
Volume Calculation ◽  
Sigmoidal Curve ◽  
Quadratic Mean Diameter

Abstract Tree height is a critical component of a complete growth-and-yield model because it is one of the primary components used in volume calculation. To develop an equation to predict total height from dbh for longleaf pine (Pinus palustris Mill.) plantations in the West Gulf region, many different sigmoidal curve forms, weighting functions, and ways of expressing height and diameter were explored. Most of the functional forms tried produced very similar results, but ultimately the form developed by Levakovic was chosen as best. Another useful result was that scaling diameters by the quadratic mean diameter on a plot and height by the average height of dominant and codominant trees in the target stand resulted in dramatically better fits than using these variables in their raw forms.

Sign in / Sign up

Export Citation Format

Share Document