Transportation: Fuel Energies

Author(s):  
Peter Rez

Transportation efficiency can be measured in terms of the energy needed to move a person or a tonne of freight over a given distance. For passengers, journey time is important, so an equally useful measure is the product of the energy used and the time taken for the journey. Transportation requires storage of energy. Rechargeable systems such as batteries have very low energy densities as compared to fossil fuels. The highest energy densities come from nuclear fuels, although, because of shielding requirements, these are not practical for most forms of transportation. Liquid hydrocarbons represent a nice compromise between high energy density and ease of use.

RSC Advances ◽  
2021 ◽  
Vol 11 (10) ◽  
pp. 5432-5443
Author(s):  
Shyam K. Pahari ◽  
Tugba Ceren Gokoglan ◽  
Benjoe Rey B. Visayas ◽  
Jennifer Woehl ◽  
James A. Golen ◽  
...  

With the cost of renewable energy near parity with fossil fuels, energy storage is paramount. We report a breakthrough on a bioinspired NRFB active-material, with greatly improved solubility, and place it in a predictive theoretical framework.


Author(s):  
Zhenyu Hu ◽  
Liping Hao ◽  
Fan Quan ◽  
Rui Guo

The demand for the development of clean and efficient energy is becoming more and more pressing due to depleting fossil fuels and environmental concerns. Hydrogen is a high energy density...


Nanoscale ◽  
2020 ◽  
Vol 12 (25) ◽  
pp. 13618-13625
Author(s):  
Jing Xu ◽  
Nianjun Yang ◽  
Siyu Yu ◽  
Anna Schulte ◽  
Holger Schönherr ◽  
...  

The low energy density of traditional supercapacitors has strongly restricted their applications.


2013 ◽  
Vol 764 ◽  
pp. 1-82 ◽  
Author(s):  
Ibram Ganesh

This article reviews the literature related to the direct uses of CO2and its conversion into various value added chemicals including high energy density liquid fuels such as methanol. The increase in the direct uses of CO2and its conversion into potential chemical commodities is very important as it directly contributes to the mitigation of CO2related global warming problem. The method being followed at present in several countries to reduce the CO2associated global warming is capturing of CO2at its major outlets using monoethanolamine based solution absorption technique followed by storing it in safe places such as, oceans, depleted coal seams, etc., (i.e., carbon dioxide capturing and storing in safe places, CCS process). This is called as CO2sequestration. Although, the CCS process is the most understood and immediate option to mitigate the global warming problem, it is considerably expensive and has become a burden for those countries, which are practicing this process. The other alternative and most beneficial way of mitigating this global warming problem is to convert the captured CO2into certain value added bulk chemicals instead of disposing it. Conversion of CO2into methanol has been identified as one of such cost effective ways of mitigating global warming problem. Further, if H2is produced from exclusively water using only solar energy instead of any fossil fuel based energy, and is used to convert CO2into methanol there are three major benefits: i) it contributes greatly to the global warming mitigation problem, ii) it greatly saves fossil fuels as methanol production from CO2could be an excellent sustainable and renewable energy resource, and iii) as on today, there is no better process than this to store energy in a more convenient and highly usable form of high energy density liquid fuel. Not only methanol, several other potential chemicals and value added chemical intermediates can be produced from CO2. In this article, i) synthesis of several commodity chemicals including poly and cyclic-carbonates, sodium carbonate and dimethyl carbonate, carbamates, urea, vicinal diamines, 2-arylsuccinic acids, dimethyl ether, methanol, various hydrocarbons, acetic acid, formaldehyde, formic acid, lower alkanes, etc., from CO2, ii) the several direct uses of CO2, and iii) the importance of producing methanol from CO2using exclusively solar energy are presented, discussed and summarized by citing all the relevant and important references.


Nanoscale ◽  
2021 ◽  
Author(s):  
Gunendra Prasad Ojha ◽  
Bishweshwar Pant ◽  
Jiwan Acharya ◽  
Mira Park

Commercial supercapacitors need high mass loading of more than 10 mg cm-2 and a high working potential window to resolve the low energy density concern. Herein, we have demonstrated a...


2014 ◽  
Vol 9 (0) ◽  
pp. 4404101-4404101 ◽  
Author(s):  
Lee A. BERNSTEIN ◽  
Darren L. BLEUEL ◽  
Joseph A. CAGGIANO ◽  
Charles CERJAN ◽  
Richard J. FORTNER ◽  
...  

Polymers ◽  
2018 ◽  
Vol 10 (12) ◽  
pp. 1349 ◽  
Author(s):  
Jian Wang ◽  
Yunchuan Xie ◽  
Jingjing Liu ◽  
Zhicheng Zhang ◽  
Qiang Zhuang ◽  
...  

Polymer-based nanodielectrics have been intensively investigated for their potential application as energy storage capacitors. However, their relatively low energy density (Ue) and discharging efficiency (η) may greatly limit their practical usage. In present work, high insulating two-dimensional boron nitride nanosheets (BNNS), were introduced into a linear dielectric polymer (P(VDF-TrFE-CTFE)-g-PMMA) matrix to enhance the energy storage performance of the composite. Thanks to the surface coating of polydopamine (PDA) on BN nanosheets, the composite filled with 6 wt% coated BNNS (mBNNS) exhibits significantly improved breakdown strength (Eb) of 540 MV/m and an energy density (Ue) of 11 J/cm3, which are increased by 23% and 100%, respectively as compared with the composite filled with the same content of pristine BNNS. Meanwhile, η of both composites is well retained at around 70% even under a high voltage of 400 MV/m, which is superior to most of the reported composites. This work suggests that complexing polymer matrix with linear dielectric properties with surface coated BNNS fillers with high insulating 2D structure might be a facile strategy to achieve composite dielectrics with simultaneously high energy density and high discharging efficiency.


2019 ◽  
Vol 2019 ◽  
pp. 1-12 ◽  
Author(s):  
Guifeng Wang ◽  
Feng Jin ◽  
Siyuan Gong ◽  
Linming Dou ◽  
Chaojun Fan ◽  
...  

Numerous tremors occur during excavation and mining periods in coal mines, and low-energy tremors often occur before strong tremors. In addition, it is found that not all strong tremors cause rockbursts. Therefore, generating behaviors of strong tremors and the triggering criterion for the occurrence of the rockburst must be investigated. In this study, generating behaviors of strong tremors were inferred by velocity tomograms and energy density clouds. An innovative facility capable of applying dynamic disturbance to roadway models was developed to study the triggering criterion for rockbursts. Velocity tomograms indicated that the stress concentration extended to the syncline region with the advance of the coalface. High-energy-density clouds expanded rapidly and regularly in some areas that were parts of the high-velocity region, indicating that the stress increased rapidly in these areas, until strong tremors took place nearby. AE activities suggested that the modelled roadway offered good resistance as the dynamic loading energy grew from 29.4 J to 117.6 J. Then, sharp AE activity at the dynamic loading energy of 147 J indicated the ultimate shock resistance of the roadway was almost reached. Finally, bursting failure of the modelled roadway was observed at a dynamic loading energy of 176.4 J.


2021 ◽  
Vol 58 (1) ◽  
pp. 113-120
Author(s):  
Dan Ioan Stoia ◽  
Cosmina Vigaru ◽  
Carmen Opris ◽  
Marius Vasilescu

The paper presents the structural and dimensional differences of rectangular shape samples manufactured by selective laser sintering (SLS) according to three process sinterization energies. In this study we determine the geometrical and structural characteristics of biocompatible PA2200 polyamide manufactured at a low energy density E1, and intermediate value E2 and a high energy density E3. Relaying on these results, four custom-made medical parts have been built using biocompatible polyamide PA2200 powder, in order to evaluate their performances.


Sign in / Sign up

Export Citation Format

Share Document