Organic Functional Group Conversion

2013 ◽  
Author(s):  
Douglass F. Taber
Keyword(s):  
Hong Kong ◽  
Allylic Alcohol ◽  
Primary Alcohols ◽  
National Chemical Laboratory ◽  
Chemical Laboratory ◽  
University Of Texas ◽  
University Of Wisconsin ◽  
Pan American ◽  
Acetate Formation ◽  
The University

Pradeep Kumar of the National Chemical Laboratory, Pune, developed (Tetrahedron Lett. 2010, 51, 744) a new procedure for the conversion of an alcohol 1 to the inverted chloride 3. Michel Couturier of OmegaChem devised (J. Org. Chem. 2010, 75, 3401) a new reagent for the conversion of an alcohol 4 to the inverted fluoride 6. For both reagents, primary alcohols worked as well. Patrick H. Toy of the University of Hong Kong showed (Synlett 2010, 1115) that diethyl-lazodicarboxylate (DEAD) could be used catalytically in the Mitsunobu coupling of 7. Employment of 8 minimized competing acetate formation. In another application of hyper-valent iodine chemistry, Jaume Vilarrasa of the Universitat de Barcelona observed (Tetrahedron Lett. 2010, 51, 1863) that the Dess-Martin reagent effected the smooth elimination of a pyridyl selenide 10. Ken-ichi Fujita and Ryohei Yamaguchi of Kyoto University extended (Org. Lett. 2010, 12, 1336) the “borrowed hydrogen” approach to effect conversion of an alcohol 12 to the sulfonamide 13. Dan Yang, also of the University of Hong Kong, developed (Org. Lett. 2010, 12, 1068, not illustrated) a protocol for the conversion of an allylic alcohol to the allylically rearranged sulfonamide. Shu-Li You of the Shanghai Institute of Organic Chemistry used (Org. Lett. 2010, 12, 800) an Ir catalyst to effect rearrangement of an allylic sulfinate 14 to the sulfone. Base-mediated conjugation then delivered 15. K. Rama Rao of the Indian Institute of Chemical Technology, Hyderabad, devised (Tetrahedron Lett. 2010, 51, 293) a La catalyst for the conversion of an iodoalkene 16 to the alkenyl sulfide 17. Alkenyl selenides could also be prepared. James M. Cook of the University of Wisconsin, Milwaukee, described (Org. Lett. 2010, 12, 464, not illustrated) a procedure for coupling alkenyl iodides and bromides with N-H heterocycles and phenols. Hansjörg Streicher of the University of Sussex showed (Tetrahedron Lett. 2010, 51, 2717) that under free radical conditions, the carboxylic acid derivative 18 could be decarboxylated to the alkenyl iodide 19. Bimal K. Banik of the University of Texas–Pan American found (Synth. Commun. 2010, 40, 1730) that water was an effective solvent for the microwave-mediated addition of a secondary amine 21 to a Michael acceptor 20.

Organocatalyzed C–C Ring Construction: The Bradshaw/Bonjoch Synthesis of (−)-Cermizine B

2017 ◽  
Author(s):  
Douglass F. Taber
Keyword(s):  
San Antonio ◽  
Bond Formation ◽  
Bryn Mawr ◽  
National Chemical Laboratory ◽  
Chemical Laboratory ◽  
Enantiomerically Pure ◽  
University Of Texas ◽  
National University ◽  
Institute Of Technology ◽  
The University

In a continuation of his studies (OHL20141229, OHL20140811) of organocatalyzed 2+2 photocycloaddition, Thorsten Bach of the Technische Universität München assembled (Angew. Chem. Int. Ed. 2014, 53, 7661) 3 by adding 2 to 1. Li-Xin Wang of the Chengdu Institute of Organic Chemistry also used (Org. Lett. 2014, 16, 6436) an organocatalyst to effect the addition of 5 to 4 to give 6. Shuichi Nakamura of the Nagoya Institute of Technology devised (Org. Lett. 2014, 16, 4452) an organocatalyst that mediated the enantioselective opening of the aziridine 7 to 8. Zhi Li of the National University of Singapore cloned (Chem. Commun. 2014, 50, 9729) an enzyme from Acinetobacter sp. RS1 that reduced 9 to 10. Gregory C. Fu of Caltech developed (Angew. Chem. Int. Ed. 2014, 53, 13183) a phosphine catalyst that directed the addition of 12 to 11 to give 13. Armido Studer of the Westfälische Wilhelms-Universität Münster showed (Angew. Chem. Int. Ed. 2014, 53, 9622) that 15 could be added to 14 to give 16 in high ee. Akkattu T. Biju of CSIR-National Chemical Laboratory described (Chem. Commun. 2014, 50, 14539) related results. The photostimulated enantioselective ketone alkylation developed (Chem. Sci. 2014, 5, 2438) by Paolo Melchiorre of ICIQ was powerful enough to enable the alkyl­ation of 17 with 18 to give 19, overcoming the stereoelectronic preference for axial bond formation. David W. Lupton of Monash University established (J. Am. Chem. Soc. 2014, 136, 14397) the organocatalyzed transformation of the dienyl ester 20 to 21. James McNulty of McMaster University added (Angew. Chem. Int. Ed. 2014, 53, 8450) azido acetone 23 to 22 to give 24 in high ee. There are sixteen enantiomerically-pure diastereomers of the product 27. John C.-G. Zhao of the University of Texas at San Antonio showed (Angew. Chem. Int. Ed. 2014, 53, 7619) that with the proper choice of organocatalyst, with or without subsequent epimerization, it was possible to selectively prepare any one of eight of those diastereomers by the addition of 26 to 25. William P. Malachowski of Bryn Mawr College showed (Tetrahedron Lett. 2014, 55, 4616) that 28, readily prepared by a Birch reduction protocol, was converted by heating followed by exposure to catalytic Me3P to the angularly-substituted octalone 29.

Vibration Signatures of Temperature Trended Bearings in Field and Laboratory Testing

2009 ◽  
Author(s):  
Constantine M. Tarawneh ◽  
Javier A. Kypuros ◽  
Arturo A. Fuentes ◽  
Brent M. Wilson ◽  
Bertha A. Gonzalez ◽  
...  
Keyword(s):  
Friction And Wear ◽  
Vibration Signal ◽  
Laboratory Research ◽  
University Of Texas ◽  
Union Pacific ◽  
Bearing Vibration ◽  
Pan American ◽  
Testing Field ◽  
The University ◽  
Vibration Signatures

Over the past two years, a series of papers have been published concerning bearing temperature trending and a mechanism to explain this troubling phenomenon. In September of 2008, a collaborative field test between The Union Pacific Railroad (UP), Amsted Rail, Rail Sciences Inc. (RSI), and The University of Texas-Pan American (UTPA) was conducted to corroborate the findings of laboratory research and testing. Field and laboratory results confirm that temperature trended bearings exhibit vibration signals that can be distinguished from healthy bearings. Distinct primary frequencies and overtones associated with the axle, cone, cage, and rollers can be readily identified within a bearing vibration signal. In a previous paper, it was demonstrated that a trended bearing exhibits vibrations of higher magnitude. However, all characteristic frequencies appear in both healthy and trended bearings, but those that dominate, i.e., have higher magnitude, are distinct for trended bearings when compared to healthy bearings. The latter can be repeatedly demonstrated in both field and laboratory experiments. Moreover, the current work identifies and distinguishes between the primary bearing frequencies and those linked to roller misalignment, which is known to increase friction and wear, and consequently raise the bearing temperature.

Functionalization of C-H Bonds: The Baran Synthesis of Dihydroxyeudesmane

2011 ◽  
Author(s):  
Douglass Taber
Keyword(s):  
Columbia University ◽  
National Chemical Laboratory ◽  
Chemical Laboratory ◽  
Du Bois ◽  
Rh Catalyst ◽  
Hydride Abstraction ◽  
Mcgill University ◽  
Radical Removal ◽  
The University ◽  
Useful Yield

Arumugam Sudalai of the National Chemical Laboratory, Pune reported (Tetrahedron Lett. 2008, 49, 6401) a procedure for hydrocarbon iodination. With straight chain hydrocarbons, only secondary iodination was observed. Chao-Jun Li of McGill University uncovered (Adv. Synth. Cat. 2009, 351, 353) a procedure for direct hydrocarbon amination, converting cyclohexane 1 into the amine 3. Justin Du Bois of Stanford University established (Angew. Chem. Int. Ed. 2009, 48, 4513) a procedure for alkane hydroxylation, converting 4 selectively into the alcohol 6. The oxirane 8 usually also preferentially ozidizes methines, hydroxylating steroids at the C-14 position. Ruggero Curci of the University of Bari found (Tetrahedron Lett. 2008, 49, 5614) that the substrate 7 showed some C-14 hydroxylation, but also a useful yield of the ketone 9. The authors suggested that the C-7 acetoxy group may be deactivating the C-14 C-H. C-H bonds can also be converted directly to carbon-carbon bonds. Mark E. Wood of the University of Exeter found (Tetrahedron Lett. 2009, 50, 3400) that free-radical removal of iodine from 10 followed by intramolecular H-atom abstraction in the presence of the trapping agent 11 delivered 12 with good diastereo control. Professor Li observed (Angew. Chem. Int. Ed. 2008, 47, 6278) that under Ru catalysis, hydrocarbons such as 13 could be directly arylated. He also established (Tetrahedron Lett. 2008, 49, 5601) conditions for the direct aminoalkylation of hydrocarbons such as 13, to give 17. Huw M. L. Davies of Emory University converted (Synlett 2009, 151) the ester 4 to the homologated diester 19 in preparatively useful yield using the diazo ester 18, the precursor to a selective, push-pull stabilized carbene. Intramolecular bond formation to an unactivated C-H can be even more selective. Guoshen Liu of the Shanghai Institute of Organic Chemistry developed (Organic Lett. 2009, 11, 2707) an oxidative Pd system that cyclized 20 to the seven-membered ring lactam 21 . Professor Du Bois devised (J. Am. Chem. Soc. 2008 , 130, 9220) a Rh catalyst that effected allylic amination of 22, to give 23 with substantial enantiocontrol. Dalibor Sames of Columbia University designed (J. Am. Chem. Soc. 2009, 131, 402) a remarkable cascade approach to C-H functionalization. Exposure of 24 to Lewis acid led to intramolecular hydride abstraction. Cyclization of the resulting stabilized carbocation delivered the tetrahydropyan 25 with remarkable diastereocontrol.

Best Synthetic Methods: C-C Bond Construction

2013 ◽  
Author(s):  
Douglass F. Taber
Keyword(s):  
Allylic Alcohol ◽  
Synthetic Methods ◽  
Grignard Reagents ◽  
Ni Catalyst ◽  
University Of Texas ◽  
University Of British Columbia ◽  
Terminal Alkene ◽  
Major Producer ◽  
The University ◽  
Linear Product

Nobuaki Kambe of Osaka University found (Tetrahedron Lett. 2009, 50, 5644) that with a Ni catalyst, Grignard reagents coupled preferentially with primary alkyl iodides, even in the presence of the usually reactive ketone. Maurice Santelli of the Université d’Aix-Marseille devised (Tetrahedron Lett. 2009, 50, 5238) a protocol for the conversion of a ketal 4 to the doubly homologated product 6. Brian T. Gregg of AMRI established (Tetrahedron Lett. 2009, 50, 3978; Tetrahedron Lett. 2009, 50, 7070) a procedure for the homologation of a nitrile 7 to the amine 9. Replacement of the NaBH4 with a second Grignard reagent led to the α-quaternary amine (not shown). Toshiaki Murai of Gifu University independently developed (J. Org. Chem. 2009, 74, 5703) a protocol for coupling two Grignard reagents with the linchpin reagent 11 to give the amine 12. Laurel L. Schafer of the University of British Columbia demonstrated (Angew. Chem. Int. Ed. 2009, 48, 8361) Ta-catalyzed intramolecular addition of a methyl amine 14 to the terminal alkene 13 to give 15. Jason S. Kingsbury of Boston College extended (Organic Lett. 2009, 11, 3202) the Roskamp protocol to unstable diazo alkanes such as 17, to give 18. Katsukiyo Miura of Saitama University found (Organic Lett. 2009, 11, 5066) that Pt catalyzed the branched addition of a terminal alkenyl silane 19 to an aldehyde 16 to give the branched adduct 20. Silanes such as 19 are readily prepared directly from the corresponding terminal alkene. Kálmán J. Szabó of Stockholm University observed (J. Org. Chem. 2009, 74, 5695) that the allyl boronate derived from the allylic alcohol 21 could add to the aldehyde 23 to give, depending on the solvent, either the branched product 24 or the linear product 25. The Wittig reaction is a major producer of by-product waste in chemical synthesis. Yong Tang of the Shanghai Institute of Organic Chemistry found (J. Org. Chem. 2007, 72, 6628) that Ph3As could serve catalytically in the condensation of 26 with an aldehyde. Christopher J. O’Brien of the University of Texas at Arlington and Gregory A. Chass of the University of Wales described (Angew. Chem. Int. Ed. 2009, 48, 6836) a related procedure using a cyclic phosphine.

Diels-Alder Cycloaddition: (+)-Armillarivin (Banwell), Gelsemiol (Gademann), (+)-Frullanolide (Liao), Myceliothermophin A (Uchiro), Peribysin E (Reddy), Caribenol A (Li/Yang)

2015 ◽  
Author(s):  
Douglass F. Taber
Keyword(s):  
Elevated Pressure ◽  
Diels Alder ◽  
Cope Rearrangement ◽  
National Chemical Laboratory ◽  
Chemical Laboratory ◽  
Enantiomerically Pure ◽  
Peking University ◽  
National University ◽  
Diastereoselective Addition ◽  
The University

Martin G. Banwell of the Australian National University prepared (Org. Lett. 2013, 15, 1934) the enantiomerically pure diol 1 by fermentation of the aromatic precursor. Diels-Alder addition of cyclopentenone 2 proceeded well at elevated pressure to give 3, the precursor to (+)-armillarivin 4. Karl Gademann of the University of Basel found (Chem. Eur. J. 2013, 19, 2589) that the Diels-Alder addition of 6 to 5 proceeded best without solvent and with Cu catalysis to give 7. Reduction under free radical conditions led to gelsemiol 8. Chun-Chen Liao of the National TsingHua University carried out (Org. Lett. 2013, 15, 1584) the diastereoselective addition of 10 to 9. A later oxy-Cope rearrangement established the octalin skeleton of (+)-frullanolide 12. D. Srinivasa Reddy of CSIR-National Chemical Laboratory devised (Org. Lett. 2013, 15, 1894) a strategy for the construction of the angularly substituted cis-fused aldehyde 15 based on Diels-Alder cycloaddition of 14 to the diene 13. Further transformation led to racemic peribysin-E 16. An effective enantioselective catalyst for dienophiles such as 14 has not yet been developed. Hiromi Uchiro of the Tokyo University of Science prepared (Tetrahedron Lett. 2012, 53, 5167) the bicyclic core of myceliothermophin A 19 by BF3•Et2O-promoted cyclization of the tetraene 17. The single ternary center of 17 mediated the formation of the three new stereogenic centers of 18, including the angular substitution. En route to caribenol A 22, Chuang-Chuang Li and Zhen Yang of the Peking University Shenzen Graduate School assembled (J. Org. Chem. 2013, 78, 5492) the triene 20 from two enantiomerically pure precursors. Inclusion of the radical inhibitor BHT sufficed to suppress competing polymerization, allowing clean cyclization to 21. Methylene blue has also been used (J. Am. Chem. Soc. 1980, 102, 5088) for this purpose.

Functional Group Transformations

2015 ◽  
Author(s):  
Douglass F. Taber
Keyword(s):  
Gold Catalyst ◽  
Sulfonyl Chloride ◽  
Allylic Alcohol ◽  
West Virginia University ◽  
Israel Institute ◽  
University Of Texas ◽  
Amino Amide ◽  
Cu Catalyst ◽  
Institute Of Technology ◽  
The University

Mark Gandelman of the Technion–Israel Institute of Technology devised (Adv. Synth. Catal. 2011, 353, 1438) a protocol for the decarboxylative conversion of an acid 1 to the iodide 3. Doug E. Frantz of the University of Texas, San Antonio effected (Angew. Chem. Int. Ed. 2011, 50, 6128) conversion of a β-keto ester 4 to the diene 5 by way of the vinyl triflate. Pei Nian Liu of the East China University of Science and Technology and Chak Po Lau of the Hong Kong Polytechnic University (Adv. Synth. Catal. 2011, 353, 275) and Robert G. Bergman and Kenneth N. Raymond of the University of California, Berkeley (J. Am. Chem. Soc. 2011, 133, 11964) described new Ru catalysts for the isomerization of an allylic alcohol 6 to the ketone 7. Xiaodong Shi of West Virginia University optimized (Adv. Synth. Catal. 2011, 353, 2584) a gold catalyst for the rearrangement of a propargylic ester 8 to the enone 9. Xue-Yuan Liu of Lanzhou University used (Adv. Synth. Catal. 2011, 353, 3157) a Cu catalyst to add the chloramine 11 to the alkyne 10 to give 12. Kasi Pitchumani of Madurai Kamaraj University converted (Org. Lett. 2011, 13, 5728) the alkyne 13 into the α-amino amide 15 by reaction with the nitrone 14. Katsuhiko Tomooka of Kyushu University effected (J. Am. Chem. Soc. 2011, 133, 20712) hydrosilylation of the propargylic ether 16 to the alcohol 17. Matthew J. Cook of Queen’s University Belfast (Chem. Commun. 2011, 47, 11104) and Anna M. Costa and Jaume Vilarrasa of the Universitat de Barcelona (Org. Lett. 2011, 13, 4934) improved the conversion of an alkenyl silane 18 to the iodide 19. Vinay Girijavallabhan of Merck/Kenilworth developed (J. Org. Chem. 2011, 76, 6442) a Co catalyst for the Markovnikov addition of sulfide to an alkene 20. Hojat Veisi of Payame Noor University oxidized (Synlett 2011, 2315) the thiol 22 directly to the sulfonyl chloride 23. Nicholas M. Leonard of Abbott Laboratories prepared (J. Org. Chem. 2011, 76, 9169) the chromatography-stable O-Su ester 25 from the corresponding acid 24.

Organocatalyzed C–C Ring Construction: The Mihovilovic Synthesis of Piperenol B

2017 ◽  
Author(s):  
Douglass F. Taber
Keyword(s):  
State University ◽  
Air Oxidation ◽  
Microbial Oxidation ◽  
Max Planck ◽  
National Chemical Laboratory ◽  
Chemical Laboratory ◽  
Northwestern University ◽  
National University ◽  
The University ◽  
Oregon State University

M. Kevin Brown of Indiana University prepared (J. Am. Chem. Soc. 2015, 137, 3482) the cyclobutane 3 by the organocatalyzed addition of 2 to the alkene 1. Karl Anker Jørgensen of Aarhus University assembled (J. Am. Chem. Soc. 2015, 137, 1685) the complex cyclobutane 7 by the addition of 5 to the acceptor 4, followed by conden­sation with the phosphorane 6. Zhi Li of the National University of Singapore balanced (ACS Catal. 2015, 5, 51) three enzymes to effect enantioselective opening of the epoxide 8 followed by air oxidation to 9. Gang Zhao of the Shanghai Institute of Organic Chemistry and Zhong Li of the East China University of Science and Technology added (Org. Lett. 2015, 17, 688) 10 to 11 to give 12 in high ee. Akkattu T. Biju of the National Chemical Laboratory combined (Chem. Commun. 2015, 51, 9559) 13 with 14 to give the β-lactone 15. Paul Ha-Yeon Cheong of Oregon State University and Karl A. Scheidt of Northwestern University reported (Chem. Commun. 2015, 51, 2690) related results. Dieter Enders of RWTH Aachen University constructed (Chem. Eur. J. 2015, 21, 1004) the complex cyclopentane 20 by the controlled com­bination of 16, 17, and 18, followed by addition of the phosphorane 19. Derek R. Boyd and Paul J. Stevenson of Queen’s University Belfast showed (J. Org. Chem. 2015, 80, 3429) that the product from the microbial oxidation of 21 could be protected as the acetonide 22. Ignacio Carrera of the Universidad de la República described (Org. Lett. 2015, 17, 684) the related oxidation of benzyl azide (not illustrated). Manfred T. Reetz of the Max-Planck-Institut für Kohlenforschung and the Philipps-Universität Marburg found (Angew. Chem. Int. Ed. 2014, 53, 8659) that cytochrome P450 could oxidize the cyclohexane 23 to the cyclohexanol 24. F. Dean Toste of the University of California, Berkeley aminated (J. Am. Chem. Soc. 2015, 137, 3205) the ketone 25 with 26 to give 27. Benjamin List, also of the Max-Planck-Institut für Kohlenforschung, reported (Synlett 2015, 26, 1413) a parallel investigation. Philip Kraft of Givaudan Schweiz AG and Professor List added (Angew. Chem. Int. Ed. 2015, 54, 1960) 28 to 29 to give 30 in high ee.

Recent Malaysian Historiography

1979 ◽  
Vol 10 (2) ◽  
pp. 247-261 ◽  
Author(s):  
Khoo Kay Kim
Keyword(s):  
Hong Kong ◽  
Southeast Asia ◽  
Initial Period ◽  
The Other ◽  
University Of Wisconsin ◽  
The World ◽  
The Subject ◽  
The University

Considering that, except for the initial period of the Emergency, Malaysia as a country attracted far less attention internationally than most of the other countries in Southeast Asia, it is somewhat surprising to find that many foreign historians did not hesitate to make Malaysian history the subject of their scholarly works. L.A. Mills wrote in 1924, 1942, and again in 1958; Rupert Emerson in 1937. In 1935, a Ph.D. thesis was completed by M.I. Knowles in the University of Wisconsin. In 1943, Virginia Thomson wrote Postmortem on Malaya. The post-1950 situation was even more exciting. Numerous theses on Malaysia were written in various universities in the world — among them SOAS, ANU, Hong Kong, California, Columbia, and Duke. Of course, by far the greatest volume of work was done in the University of Malaya (Singapore) itself where, between 1951 and 1961, more than a hundred theses were completed at both the graduate and undergraduate levels. Understandably, in the mid-sixties, there was a growing feeling that the field was being exhausted.

Diels–Alder Cycloaddition: Pancratistatin (Cho), Nootkatone (Reddy), Platensimycin (Zhang/Lee), Scabronine G (Nakada), Isoglaziovianol (Trauner)

2017 ◽  
Author(s):  
Douglass F. Taber
Keyword(s):  
Aldol Condensation ◽  
Diels Alder ◽  
Cancer Center ◽  
Columbia University ◽  
National Chemical Laboratory ◽  
Chemical Laboratory ◽  
Intramolecular Cycloaddition ◽  
Enantiomerically Pure ◽  
Peking University ◽  
The University

Samuel J. Danishefsky of Columbia University and the Memorial Sloan-Kettering Cancer Center made (Proc. Natl. Acad. Sci. 2013, 110, 10904) the unexpected obser­vation that methylation of the enolate derived from conjugate addition to the readily-prepared 1 followed by intramolecular alkene metathesis led to the trans fused ketone 2. This can be contrasted to the diastereo- and regioisomer 3, the product from Diels-Alder cycloaddition of 2-methylcyclohexenone to isoprene. The trans ring fusion of 2 is particularly significant because ozonolysis followed by aldol condensation would deliver the angularly-methylated trans-fused 6/5 C–D ring system of the steroids and related natural products. Cheon-Gyu Cho of Hanyang University added (Org. Lett. 2013, 15, 5806) the activated dienophile 4 to the dienyl lactone to give, after oxidation, the dibro­mide 5. Debromination followed by oxidation led to the antineoplastic lactam pancratistatin 6. D. Srinivasa Reddy of CSIR-National Chemical Laboratory Pune devised (J. Org. Chem. 2013, 78, 8149) a cascade protocol of Diels-Alder cycloaddition of 8 to the diene 7, followed by intramolecular aldol condensation, to give the enone 9. Oxidative manipulation followed by methylenation completed the synthesis of the commercially important grapefruit flavor nootkatone 10. Xinhao Zhang and Chi-Sing Lee of the Peking University Shenzen Graduate School uncovered (J. Org. Chem. 2013, 78, 7912) another cascade transformation, intermolecular addition of 11 to 12 followed by intramolecular Conia-ene cyclization, to give the tricyclic 13. Further manipulation led to an established intermediate for the total synthesis of platensimycin 14. Masahisa Nakada of Waseda University prepared (Angew. Chem. Int. Ed. 2013, 52, 7569) the enantiomerically-pure allene 15. Oxidation of the phenol to the monoketal of the cyclohexadienone set the stage for intramolecular cycloaddition to give 16. Oxidative cleavage followed by intramolecular alkene metathesis led to (+)-scabronine G 17. Dirk Trauner of the University of Munich assembled (Org. Lett. 2013, 15, 4324) the enantiomerically-pure alcohol 18. Oxidation gave the quinone, leading to intra­molecular Diels–Alder cycloaddition. The free alcohol then added to the exocyclic alkene of that product, to give, after further oxidation, the ether 19. Deprotection fol­lowed by reduction then completed the synthesis of (−)-isoglaziovianol 20.

C–O Ring-Containing Natural Products: Cyanolide A (Krische), Bisabosqual A (Parker), Iso-Eriobrucinol A (Hsung), Trichodermatide A (Hiroya), Batrachotoxin Core (Du Bois)

2017 ◽  
Author(s):  
Tristan H. Lambert
Keyword(s):  
Total Synthesis ◽  
Natural Product ◽  
Radical Cyclization ◽  
Ethyl Vinyl ◽  
University Of Texas ◽  
Iridium Catalysis ◽  
University Of Wisconsin ◽  
Bisabosqual A ◽  
The University ◽  
Very High

Michael J. Krische at the University of Texas at Austin developed (Angew. Chem. Int. Ed. 2013, 52, 4470) a total synthesis of cyanolide A 7 in only seven steps, a sequence so short it is shown here in its entirety. Diol 1 was subjected to enantioselective cat­alytic bisallylation under iridium catalysis to furnish 2 with very high levels of ste­reocontrol. Cross metathesis using ruthenium catalyst 3 first with ethyl vinyl ketone and then with ethylene resulted in the production of pyran 4. Glycosylation of 4 with phenylthioglycoside 5, stereoselective reduction of the ketone function, and oxidative cleavage of the olefin then furnished the carboxylic acid 6. Finally, dimerization of 6 with 2-methyl-6-nitrobenzoic anhydride (MBNA) yielded cyanolide A. Kathlyn A. Parker at Stony Brook University reported (J. Am. Chem. Soc. 2013, 135, 582) a tandem radical cyclization strategy for the total synthesis of bisabosqual A 11. The key substrate 9 was prepared in three steps from the diester 8. Treatment of 9 with tri-s-butylborane and TTMS in the presence of air induced the tandem 5-exo, 6-exo radical cyclization to produce the complete core 10 of the natural product as a mixture of diastereomers, which could be equilibrated. Some further redox maneu­vers then led to bisabosqual A. Richard P. Hsung at the University of Wisconsin, Madison disclosed (Org. Lett. 2013, 15, 3130) a very brief synthesis of iso-eriobrucinol A and related isomers using a unique cascade sequence. First, phloroglucinol 12 and citral 13 were condensed using piperidine and acetic anhydride. The product of this operation was the tetracy­clic cyclobutane 14, the result of an oxa-[3+3] annulation followed by a stepwise, cat­ionic [2+2] cycloaddition. Treatment of 14 with methyl propiolate in the presence of catalytic indium(III) chloride under microwave irradiation furnished iso-eriobrucinol A, as well as the isomeric natural product iso-eriobrucinol B. A concise approach to trichodermatide A 19 was developed (Angew. Chem. Int. Ed. 2013, 52, 3546) by Kou Hiroya at Musashino University. Aldehyde 16, which was syn­thesized from L-tartaric acid, was condensed with 1,3-cyclohexanedione in the presence of piperidine, resulting in diketone 17.

Sign in / Sign up

Export Citation Format

Share Document