Salt-Dependent Structural Changes of Chromatin in Isolated Chicken Liver Nuclei as Visualized by Scanning Electron Microscopy

2021 ◽  
Vol 22 (13) ◽  
pp. 6805
Author(s):  
Mihaela-Cristina Bunea ◽  
Victor-Constantin Diculescu ◽  
Monica Enculescu ◽  
Horia Iovu ◽  
Teodor Adrian Enache

The electrochemical behavior and the interaction of the immunosuppressive drug azathioprine (AZA) with deoxyribonucleic acid (DNA) were investigated using voltammetric techniques, mass spectrometry (MS), and scanning electron microscopy (SEM). The redox mechanism of AZA on glassy carbon (GC) was investigated using cyclic and differential pulse (DP) voltammetry. It was proven that the electroactive center of AZA is the nitro group and its reduction mechanism is a diffusion-controlled process, which occurs in consecutive steps with formation of electroactive products and involves the transfer of electrons and protons. A redox mechanism was proposed and the interaction of AZA with DNA was also investigated. Morphological characterization of the DNA film on the electrode surface before and after interaction with AZA was performed using scanning electron microscopy. An electrochemical DNA biosensor was employed to study the interactions between AZA and DNA with different concentrations, incubation times, and applied potential values. It was shown that the reduction of AZA molecules bound to the DNA layer induces structural changes of the DNA double strands and oxidative damage, which were recognized through the occurrence of the 8-oxo-deoxyguanosine oxidation peak. Mass spectrometry investigation of the DNA film before and after interaction with AZA also demonstrated the formation of AZA adducts with purine bases.


1985 ◽  
Vol 55 ◽  
Author(s):  
L.-H. Yahia ◽  
G. Drouin ◽  
C.-H. Rivard

ABSTRACTSpinal ligaments were obtained from normal and scoliotic individuals. Detailed morphological studies were carried out on the yellow, interspinous and supraspinous ligaments by light and scanning electron microscopy. Normal yellow ligaments are mostly constituted of dense elastin fibers with only a few collagen fibers and sparse blood vessels, while in normal interspinous and supraspinous ligaments, the presence of collagen is highly dominant. In the latter structures, the collagen fascicles are characterized by a regular waviness morphology. The fibrils constituting the fascicles appear either parallel or helical with respect to the fascicle axis. Structural changes are observed in the spinal ligaments of patients with congenital as well as idiopathic scoliosis. For yellow ligaments, only slight differences are found between normal and scoliotic specimens. However, alterations in collagen waviness and architecture are observed mainly in the supraspinous ligaments and to a lesser extent in the interspinous ligaments. In addition, increases in the cellularity, loose connective tissue and vessels are found in both forgoing ligaments. These results indicate that the more pronounced scoliosis-related changes occur in ligaments having the farthest distance from the axis of flexion-rotation.


2015 ◽  
Vol 2015 ◽  
pp. 1-10 ◽  
Author(s):  
Safrina Rahmah ◽  
Safiah Ahmad Mubbarakh ◽  
Khor Soo Ping ◽  
Sreeramanan Subramaniam

Protocorm-like bodies (PLBs) ofBrassidiumShooting Star orchid were successfully cryopreserved using droplet-vitrification method. Vitrification based cryopreservation protocol is comprised of preculture, osmoprotection, cryoprotection, cooling, rewarming, and growth recovery and each and every step contributes to the achievement of successful cryopreservation. In order to reveal the lethal and nonlethal damage produced by cryopreservation, histological observation, scanning electron microscopy (SEM), and biochemical analysis were carried out in both cryopreserved and noncryopreserved PLBs ofBrassidiumShooting Star orchid comparing with the control PLBs stock culture. Histological and scanning electron microscopy analyses displayed structural changes in cryopreserved PLBs due to the impact of cryoinjury during exposure to liquid nitrogen. Total soluble protein significantly increased throughout the dehydration process and the highest value was achieved when PLBs were stored in liquid nitrogen. Ascorbate peroxidase (APX) and catalase (CAT) showed the highest enzyme activities in both dehydration and cryostorage treatments indicating that stress level of PLBs was high during these stages.


HortScience ◽  
2000 ◽  
Vol 35 (1) ◽  
pp. 99-103 ◽  
Author(s):  
Hirofumi Terai ◽  
Alley E. Watada ◽  
Charles A. Murphy ◽  
William P. Wergin

Structural changes in chloroplasts of broccoli (Brassica oleracea L., Italica group) florets during senescence were examined using light microscopy, scanning electron microscopy (SEM) with freeze-fracture technique, and transmission electron microscopy (TEM) to better understand the process of chloroplast degradation, particularly at the advanced stage of senescence. Light microscopy revealed that chloroplasts, which initially were intact and green, became obscure in shape, and their color faded during senescence. Small, colored particles appeared in cells as the florets approached the final stage of senescence and became full- to dark-yellow in color. Scanning electron microscopy showed that stroma thylakoids in the chloroplast initially were parallel to each other and grana thylakoids were tightly stacked. As senescence advanced, the grana thylakoids degenerated and formed globules. The globules became larger by aggregation as senescence progressed, and the large globules, called “thylakoid plexus,” formed numerous vesicles. The vesicles ultimately were expelled into the cytosol, and the light microscope revealed many colored particles in the senescent cells. These results indicate that the degradation of chloroplasts in broccoli florets progresses systematically, with the final product being colored particles, which are visible in yellow broccoli sepal cells.


Author(s):  
S. A. Jenekhe ◽  
H. T. Davis ◽  
L. E. Scriven

Aqueous suspensions of clay mineral particles evidently form gels owing to interactions between the electrically charged particles. It is generally accepted that physical properties of a suspension, especially rheological properties, reflect its microstructure and that deformation brings about structural changes (1) We have applied fast-freeze cold-stage scanning electron microscopy to visualize the microstructures of bentonite clay suspensions of known shear history.


2008 ◽  
Vol 1139 ◽  
Author(s):  
Michel T. Ignat ◽  
Sabine Lay ◽  
Francine Roussel d'Herbey ◽  
Cedric Seguineau ◽  
Christophe Malhaire ◽  
...  

AbstractThe results of micromechanical tensile experiments performed on thin aluminum samples are presented and discussed. The micro tensile test system and the design of the samples, based on finite element modeling (FEM), and their production by micromachining are briefly described. Some examples of the stress strain curves are presented. The Young's modulus and critical parameters (flow and rupture stress and strains) are reported. The micro structural changes induced by the tensile experiment were observed during and after the testing by scanning electron microscopy (SEM) and transmission electron microscopy (TEM).The results of micromechanical tensile experiments performed on thin aluminum samples are presented and discussed. The micro tensile test system and the design of the samples, based on finite element modeling (FEM), and their production by micromachining are briefly described. Some examples of the stress strain curves are presented. The Young's modulus and critical parameters (flow and rupture stress and strains) are reported. The micro structural changes induced by the tensile experiment were observed during and after the testing by scanning electron microscopy (SEM) and transmission electron microscopy (TEM).


2015 ◽  
Vol 41 (1) ◽  
pp. 17-21 ◽  
Author(s):  
Mariana Lima da Costa Valente ◽  
Antonio Carlos Shimano ◽  
Elcio Marcantonio Junior ◽  
Andréa Candido dos Reis

The purpose of the study was to use scanning electron microscopy and energy dispersive x-ray spectrometry to assess possible morphologic and chemical changes after performing double-insertion and pullout tests of implants of different shapes and surface treatments. Four different types of implants were used—cylindrical machined-surface implants, cylindrical double-surface–treated porous implants, cylindrical surface-treated porous implants, and tapered surface-treated porous implants—representing a total of 32 screws. The implants were inserted into synthetic bone femurs, totaling 8 samples, before performing each insertion with standardized torque. After each pullout the implants were analyzed by scanning electron microscopy and energy dispersive x-ray spectrometry using a universal testing machine and magnified 35 times. No structural changes were detected on morphological surface characterization, only substrate accumulation. As for composition, there were concentration differences in the titanium, oxygen, and carbon elements. Implants with surface acid treatment undergo greater superficial changes in chemical composition than machined implants, that is, the greater the contact area of the implant with the substrate, the greater the oxide layer change. In addition, prior manipulation can alter the chemical composition of implants, typically to a greater degree in surface-treated implants.


Sign in / Sign up

Export Citation Format

Share Document