Pedicle Screw Motion in the Osteoporotic Spine After Augmentation With Laminar Hooks, Sublaminar Wires, or Calcium Phosphate Cement: A Comparative Analysis

Spine ◽  
2004 ◽  
Vol 29 (16) ◽  
pp. 1723-1730 ◽  
Author(s):  
Juay-Seng Tan ◽  
Brian K. Kwon ◽  
Marcel F. Dvorak ◽  
Charles G. Fisher ◽  
Thomas R. Oxland
2004 ◽  
Vol 19 (2) ◽  
pp. 20-23
Author(s):  
Shu-hua Yang ◽  
De-hao Fu ◽  
Jin Li ◽  
Wei-hua Xu ◽  
Cao Yang ◽  
...  

Biomedicines ◽  
2021 ◽  
Vol 9 (10) ◽  
pp. 1392
Author(s):  
Harald Krenzlin ◽  
Andrea Foelger ◽  
Volker Mailänder ◽  
Christopher Blase ◽  
Marc Brockmann ◽  
...  

Osteoporotic vertebral fractures often necessitate fusion surgery, with high rates of implant failure. We present a novel bioactive composite of calcium phosphate cement (CPC) and the collagen I mimetic P-15 for pedicle screw augmentation in osteoporotic bone. Methods involved expression analysis of osteogenesis-related genes during osteoblastic differentiation by RT-PCR and immunostaining of osteopontin and Ca2+ deposits. Untreated and decalcified sheep vertebrae were utilized for linear pullout testing of pedicle screws. Bone mineral density (BMD) was measured using dual-energy X-ray absorptiometry (DEXA). Expression of ALPI II (p < 0.0001), osteopontin (p < 0.0001), RUNX2 (p < 0.0001), and osteocalcin (p < 0.0001) was upregulated after co-culture of MSC with CPC-P-15. BMD was decreased by 28.75% ± 2.6%. Pullout loads in untreated vertebrae were 1405 ± 6 N (p < 0.001) without augmentation, 2010 ± 168 N (p < 0.0001) after augmentation with CPC-P-15, and 2112 ± 98 N (p < 0.0001) with PMMA. In decalcified vertebrae, pullout loads were 828 ± 66 N (p < 0.0001) without augmentation, 1324 ± 712 N (p = 0.04) with PMMA, and 1252 ± 131 N (p < 0.0078) with CPC-P-15. CPC-P-15 induces osteoblastic differentiation of human MES and improves pullout resistance of pedicle screws in osteoporotic and non-osteoporotic bone.


Spine ◽  
1997 ◽  
Vol 22 (15) ◽  
pp. 1696-1705 ◽  
Author(s):  
Douglas C. Moore ◽  
Ranjan S. Maitra ◽  
Laith A. Farjo ◽  
Gregory P. Graziano ◽  
Steven A. Goldstein

2021 ◽  
Vol 11 (8) ◽  
pp. 1366-1372
Author(s):  
Yongliang Liu ◽  
Caijuan Chu ◽  
Hua Gao ◽  
Hong Jing

Spondylolisthesis (SP), particularly lumbar SP in children, is mostly caused by dysplasia. Several clinical studies have revealed that bone cement filled with hollow pedicle screws can achieve great benefits in the treatment of SP. However, most of the existing bone cement materials are based on polymethyl methacrylate (PMMA) and calcium phosphate cement (CPC). However, PMMA has poor biocompatibility, due to which its actual efficacy is greatly reduced. Although CPC has good biocompatibility, it exhibits certain cytotoxicity and high pressure in the bone marrow, resulting in fat droplets in blood vessels, which may cause embolisms. This study aimed to investigate the actual efficacy of a new type of bone nanocement filled with hollow pedicle screw in the treatment of 11 children with lumbar SP and to provide a feasible surgical method for the treatment of lumbar SP with hollow pedicle screw filled with bone nanocement.


Spine ◽  
2004 ◽  
Vol 29 (11) ◽  
pp. E212-E216 ◽  
Author(s):  
Susan M. Renner ◽  
Tae-Hong Lim ◽  
Whoan-Jeang Kim ◽  
Leonid Katolik ◽  
Howard S. An ◽  
...  

2018 ◽  
Vol 12 (1) ◽  
pp. 3-11 ◽  
Author(s):  
Gorkem Kiyak ◽  
Tevfik Balikci ◽  
Ahmed Majid Heydar ◽  
Murat Bezer

<sec><title>Study Design</title><p>Mechanical study.</p></sec><sec><title>Purpose</title><p>To compare the pullout strength of different screw designs and augmentation techniques in an osteoporotic bone model.</p></sec><sec><title>Overview of Literature</title><p>Adequate bone screw pullout strength is a common problem among osteoporotic patients. Various screw designs and augmentation techniques have been developed to improve the biomechanical characteristics of the bone–screw interface.</p></sec><sec><title>Methods</title><p>Polyurethane blocks were used to mimic human osteoporotic cancellous bone, and six different screw designs were tested. Five standard and expandable screws without augmentation, eight expandable screws with polymethylmethacrylate (PMMA) or calcium phosphate augmentation, and distal cannulated screws with PMMA and calcium phosphate augmentation were tested. Mechanical tests were performed on 10 unused new screws of each group. Screws with or without augmentation were inserted in a block that was held in a fixture frame, and a longitudinal extraction force was applied to the screw head at a loading rate of 5 mm/min. Maximum load was recorded in a load displacement curve.</p></sec><sec><title>Results</title><p>The peak pullout force of all tested screws with or without augmentation was significantly greater than that of the standard pedicle screw. The greatest pullout force was observed with 40-mm expandable pedicle screws with four fins and PMMA augmentation. Augmented distal cannulated screws did not have a greater peak pullout force than nonaugmented expandable screws. PMMA augmentation provided a greater peak pullout force than calcium phosphate augmentation.</p></sec><sec><title>Conclusions</title><p>Expandable pedicle screws had greater peak pullout forces than standard pedicle screws and had the advantage of augmentation with either PMMA or calcium phosphate cement. Although calcium phosphate cement is biodegradable, osteoconductive, and nonexothermic, PMMA provided a significantly greater peak pullout force. PMMA-augmented expandable 40-mm four-fin pedicle screws had the greatest peak pullout force.</p></sec>


Sign in / Sign up

Export Citation Format

Share Document