scholarly journals Evanescent wave boundary layers in metamaterials and sidestepping them through a variational approach

Author(s):  
Ankit Srivastava ◽  
John R. Willis

All metamaterial applications are based upon the idea that extreme material properties can be achieved through appropriate dynamic homogenization of composites. This homogenization is almost always done for infinite domains and the results are then applied to finite samples. This process ignores the evanescent waves which appear at the boundaries of such finite samples. In this paper, we first clarify the emergence and purpose of these evanescent waves in a model problem consisting of an interface between a layered composite and a homogeneous medium. We show that these evanescent waves form boundary layers on either side of the interface beyond which the composite can be represented by appropriate infinite domain homogenized relations. We show that if one ignores the boundary layers, then the displacement and stress fields are discontinuous across the interface. Therefore, the scattering coefficients at such an interface cannot be determined through the conventional continuity conditions involving only propagating modes. Here, we propose an approximate variational approach for sidestepping these boundary layers. The aim is to determine the scattering coefficients without the knowledge of evanescent modes. Through various numerical examples we show that our technique gives very good estimates of the actual scattering coefficients beyond the long wavelength limit.

Author(s):  
Chunxiong Zheng ◽  
Xiang Ma

Abstract This paper is concerned with a fast finite element method for the three-dimensional Poisson equation in infinite domains. Both the exterior problem and the strip-tail problem are considered. Exact Dirichlet-to-Neumann (DtN)-type artificial boundary conditions (ABCs) are derived to reduce the original infinite-domain problems to suitable truncated-domain problems. Based on the best relative Chebyshev approximation for the square-root function, a fast algorithm is developed to approximate exact ABCs. One remarkable advantage is that one need not compute the full eigensystem associated with the surface Laplacian operator on artificial boundaries. In addition, compared with the modal expansion method and the method based on Pad$\acute{\textrm{e}}$ approximation for the square-root function, the computational cost of the DtN mapping is further reduced. An error analysis is performed and numerical examples are presented to demonstrate the efficiency of the proposed method.


1967 ◽  
Vol 11 ◽  
pp. 249-274 ◽  
Author(s):  
J. R. Rhodes ◽  
T. Furuta

AbstractA portable, battery-operated X-ray fluorescence analyzer weighing 15 lb is described, consisting of a Nal(Tl) scintillation-counter probe and an electronic unit with a single-channel pulse-height analyzer and reversible scaler. Radioisotope X-ray sources are used for excitation of the sample and, where necessary, balanced filters for resolution of neighboring characteristic X-rays. Emphasis has been placed on designing and producing an instrument that is easy and convenient to operate in laboratory, factory, or field conditions and that can equally well be used to measure extended surfaces, such as rock faces, or finite samples in the form of powders, briquettes, or liquids. The feasibility of the following analyses has been studied by using for each determination the appropriate radioisotope source and filters: sulfur in coal; calcium and iron in cement raw mix; copper in copper ores; and vanadium, chromium, molybdenum, and tungsten in steels. Detection limits, based on counting statistics obtained in count times of 10 to 100 sec, range from 0.03% for copper in ores to 0.2% for sulfur in coal. Both matrix absorption and enhancement effects were encountered and were eliminated or reduced substantially by suitable choice of source energy, by the use of nomograms, or by semiempirical correction factors based on attenuation or scattering coefficients.


2003 ◽  
Vol 45 (1) ◽  
pp. 133-143
Author(s):  
G. A. Mohr ◽  
A. S. Power

AbstractA simple formulation of a 9 df cubic Hermitian finite element for potential flow problems is given, using the interpolation of the BCIZ element and after Argyris, defining natural velocities parallel to the element sides. Consistent loads for body forces are also derived and it is shown that these are necessary to obtain accurate results when body forces are significant. Example problems include those of infinite domains for which simpleconditions at infinityare used.


2019 ◽  
Vol 14 (5) ◽  
pp. 503
Author(s):  
Kyle Booker ◽  
Yana Nec

A numerical approach is developed to solve differential equations on an infinite domain, when the solution is known to possess a slowly decaying tail. An unorthodox boundary condition relying on the existence of an asymptotic relation for |y| ≫ 1 is implemented, followed by an optimisation procedure, allowing to obtain an accurate solution over a truncated finite domain. The method is applied to −(−Δ)γ/2u − u + up = 0 in ℝ, a non-linear integro-differential equation containing the fractional Laplacian, and is easily expanded to asymmetric boundary conditions or domains of a higher dimension.


2015 ◽  
Vol 11 (7) ◽  
pp. 5403-5410 ◽  
Author(s):  
Mohamed Abdel -Latif Ramadan

The purpose of this paper is to investigate the use of rational Chebyshev (RC) functions for solving higher-order linear ordinary differential equations with variable coefficients on a semi-infinite domain using new rational Chebyshev collocation points.  This method transforms the higher-order linear ordinary differential equations and the given conditions to matrix equations with unknown rational Chebyshev coefficients. These matrices together with the collocation method are utilized to reduce the solution of higher-order ordinary differential equations to the solution of a system of algebraic equations. The solution is obtained in terms of RC series. Numerical examples are given to demonstrate the validity and applicability of the method. The obtained numerical results are compared with others existing methods and the exact solution where it shown to be very attractive and maintains better accuracy.


2007 ◽  
Vol 1014 ◽  
Author(s):  
Jonghwa Shin ◽  
Jung-Tsung Shen ◽  
Shanhui Fan

AbstractIt is commonly assumed that the long-wavelength limit of a metamaterial can always be described in terms of effective permeability and permittivity tensors. Here we report that this assumption is not necessary–there exists a new class of metamaterial consisting of several interlocking disconnected metal networks, for which the effective long-wavelength theory is local, but the effective field is non-Maxwellian, and possesses much more internal degrees of freedom than effective Maxwellian fields in a local homogeneous medium.


2000 ◽  
Vol 16 (2) ◽  
pp. 103-108 ◽  
Author(s):  
Jaehwan Kim ◽  
Vasundara V. Varadan ◽  
Vijay K. Varadan

ABSTRACTThis paper deals with a hybrid finite element method for wave scattering problems in infinite domains. Scattering of waves involving complex geometries, in conjunction with infinite domains is modeled by introducing a mathematical boundary within which a finite element representation is employed. On the mathematical boundary, the finite element representation is matched with a known analytical solution in the infinite domain in terms of fields and their derivatives. The derivative continuity is implemented by using a slope constraint. Drilling degrees of freedom at each node of the finite element model are introduced to make the numerical model more sensitive to the transverse component of the elastodynamic field. To verify the effects of drilling degrees freedom and slope constraints individually, reflection of normally incident P and SV waves on a traction free half space is considered. For P-wave incidence, the results indicate that the use of a slope constraint is more effective because it suppresses artificial reflection at the mathematical boundary. For the SV-wave case, the use of drilling degrees of freedom is effective in reducing numerical error at the irregular frequencies.


2021 ◽  
Vol 17 (3) ◽  
pp. 1-23
Author(s):  
Caterina Viola ◽  
Christian Coester

Convex relaxations have been instrumental in solvability of constraint satisfaction problems (CSPs), as well as in the three different generalisations of CSPs: valued CSPs, infinite-domain CSPs, and most recently promise CSPs. In this work, we extend an existing tractability result to the three generalisations of CSPs combined: We give a sufficient condition for the combined basic linear programming and affine integer programming relaxation for exact solvability of promise valued CSPs over infinite-domains. This extends a result of Brakensiek and Guruswami (SODA’20) for promise (non-valued) CSPs (on finite domains).


2021 ◽  
Vol 2021 ◽  
pp. 1-12
Author(s):  
Mohamed A. Ramadan ◽  
Taha Radwan ◽  
Mahmoud A. Nassar ◽  
Mohamed A. Abd El Salam

A rational Chebyshev (RC) spectral collocation technique is considered in this paper to solve high-order linear ordinary differential equations (ODEs) defined on a semi-infinite domain. Two definitions of the derivative of the RC functions are introduced as operational matrices. Also, a theoretical study carried on the RC functions shows that the RC approximation has an exponential convergence. Due to the two definitions, two schemes are presented for solving the proposed linear ODEs on the semi-infinite interval with the collocation approach. According to the convergence of the RC functions at the infinity, the proposed technique deals with the boundary value problem which is defined on semi-infinite domains easily. The main goal of this paper is to present a comparison study for differential equations defined on semi-infinite intervals using the proposed two schemes. To demonstrate the validity of the comparisons, three numerical examples are provided. The obtained numerical results are compared with the exact solutions of the proposed problems.


Sign in / Sign up

Export Citation Format

Share Document