scholarly journals Modelling burning thermonuclear plasma

Author(s):  
S. J. Rose ◽  
P. W. Hatfield ◽  
R. H. H. Scott

Considerable progress towards the achievement of thermonuclear burn using inertial confinement fusion has been achieved at the National Ignition Facility in the USA in the last few years. Other drivers, such as the Z-machine at Sandia, are also making progress towards this goal. A burning thermonuclear plasma would provide a unique and extreme plasma environment; in this paper we discuss (a) different theoretical challenges involved in modelling burning plasmas not currently considered, (b) the use of novel machine learning-based methods that might help large facilities reach ignition, and (c) the connections that a burning plasma might have to fundamental physics, including quantum electrodynamics studies, and the replication and exploration of conditions that last occurred in the first few minutes after the Big Bang. This article is part of a discussion meeting issue ‘Prospects for high gain inertial fusion energy (part 1)’.

Author(s):  
P. A. Norreys ◽  
C. Ridgers ◽  
K. Lancaster ◽  
M. Koepke ◽  
G. Tynan

A European consortium of 15 laboratories across nine nations have worked together under the EUROFusion Enabling Research grants for the past decade with three principle objectives. These are: (a) investigating obstacles to ignition on megaJoule-class laser facilities; (b) investigating novel alternative approaches to ignition, including basic studies for fast ignition (both electron and ion-driven), auxiliary heating, shock ignition etc.; and (c) developing technologies that will be required in the future for a fusion reactor. The Hooke discussion meeting in March 2020 provided an opportunity to reflect on the progress made in inertial confinement fusion research world-wide to date. This first edition of two special issues seeks to identify paths forward to achieve high fusion energy gain. This article is part of a discussion meeting issue ‘Prospects for high gain inertial fusion energy (part 1)’.


Author(s):  
A. Casner

Since the seminal paper of Nuckolls triggering the quest of inertial confinement fusion (ICF) with lasers, hydrodynamic instabilities have been recognized as one of the principal hurdles towards ignition. This remains true nowadays for both main approaches (indirect drive and direct drive), despite the advent of MJ scale lasers with tremendous technological capabilities. From a fundamental science perspective, these gigantic laser facilities enable also the possibility to create dense plasma flows evolving towards turbulence, being magnetized or not. We review the state of the art of nonlinear hydrodynamics and turbulent experiments, simulations and theory in ICF and high-energy-density plasmas and draw perspectives towards in-depth understanding and control of these fascinating phenomena. This article is part of a discussion meeting issue ‘Prospects for high gain inertial fusion energy (part 2)’.


Author(s):  
J. Zhang ◽  
W. M. Wang ◽  
X. H. Yang ◽  
D. Wu ◽  
Y. Y. Ma ◽  
...  

While major progress has been made in the research of inertial confinement fusion, significant challenges remain in the pursuit of ignition. To tackle the challenges, we propose a double-cone ignition (DCI) scheme, in which two head-on gold cones are used to confine deuterium–tritium (DT) shells imploded by high-power laser pulses. The scheme is composed of four progressive controllable processes: quasi-isentropic compression, acceleration, head-on collision and fast heating of the compressed fuel. The quasi-isentropic compression is performed inside two head-on cones. At the later stage of the compression, the DT shells in the cones are accelerated to forward velocities of hundreds of km s –1 . The head-on collision of the compressed and accelerated fuels from the cone tips transfer the forward kinetic energy to the thermal energy of the colliding fuel with an increased density. The preheated high-density fuel can keep its status for a period of approximately 200 ps. Within this period, MeV electrons generated by ps heating laser pulses, guided by a ns laser-produced strong magnetic field further heat the fuel efficiently. Our simulations show that the implosion inside the head-on cones can greatly mitigate the energy requirement for compression; the collision can preheat the compressed fuel of approximately 300 g cm −3 to a temperature above keV. The fuel can then reach an ignition temperature of greater than 5 keV with magnetically assisted heating of MeV electrons generated by the heating laser pulses. Experimental campaigns to demonstrate the scheme have already begun. This article is part of a discussion meeting issue ‘Prospects for high gain inertial fusion energy (part 1)’.


Author(s):  
Andrew Randewich ◽  
Rob Lock ◽  
Warren Garbett ◽  
Dominic Bethencourt-Smith

Almost 30 years since the last UK nuclear test, it remains necessary regularly to underwrite the safety and effectiveness of the National Nuclear Deterrent. To do so has been possible to date because of the development of continually improving science and engineering tools running on ever more powerful high-performance computing platforms, underpinned by cutting-edge experimental facilities. While some of these facilities, such as the Orion laser, are based in the UK, others are accessed by international collaboration. This is most notably with the USA via capabilities such as the National Ignition Facility, but also with France where a joint hydrodynamics facility is nearing completion following establishment of a Treaty in 2010. Despite the remarkable capability of the science and engineering tools, there is an increasing requirement for experiments as materials age and systems inevitably evolve further from what was specifically trialled at underground nuclear tests (UGTs). The data from UGTs will remain the best possible representation of the extreme conditions generated in a nuclear explosion, but it is essential to supplement these data by realizing new capabilities that will bring us closer to achieving laboratory simulations of these conditions. For high-energy-density physics, the most promising technique for generating temperatures and densities of interest is inertial confinement fusion (ICF). Continued research in ICF by the UK will support the certification of the deterrent for decades to come; hence the UK works closely with the international community to develop ICF science. UK Ministry of Defence © Crown Owned Copyright 2020/AWE. This article is part of a discussion meeting issue ‘Prospects for high gain inertial fusion energy (part 1)'.


Author(s):  
Peter A. Norreys ◽  
Christopher Ridgers ◽  
Kate Lancaster ◽  
Mark Koepke ◽  
George Tynan

Part II of this special edition contains the remaining 11 papers arising from a Hooke discussion meeting held in March 2020 devoted to exploring the current status of inertial confinement fusion research worldwide and its application to electrical power generation in the future, via the development of an international inertial fusion energy programme. It builds upon increased coordination within Europe over the past decade by researchers supported by the EUROFusion Enabling Research grants, as well as collaborations that have arisen naturally with some of America's and Asia's leading researchers, both in the universities and national laboratories. The articles are devoted to informing an update to the European roadmap for an inertial fusion energy demonstration reactor, building upon the commonalities between the magnetic and inertial fusion communities’ approaches to fusion energy. A number of studies devoted to understanding the physics barriers to ignition on current facilities are then presented. The special issue concludes with four state-of-the-art articles describing recent significant advances in fast ignition inertial fusion research. This article is part of a discussion meeting issue ‘Prospects for high gain inertial fusion energy (part 2)’.


Author(s):  
C. P. Ridgers ◽  
C. Arran ◽  
J. J. Bissell ◽  
R. J. Kingham

Magnetic fields can be generated in plasmas by the Biermann battery when the electric field produced by the electron pressure gradient has a curl. The commonly employed magnetohydrodynamic (MHD) model of the Biermann battery breaks down when the electron distribution function is distorted away from Maxwellian. Using both MHD and kinetic simulations of a laser-plasma interaction relevant to inertial confinement fusion we have shown that this distortion can reduce the Biermann-producing electric field by around 50%. More importantly, the use of a flux limiter in an MHD treatment to deal with the effect of the non-Maxwellian electron distribution on electron thermal transport leads to a completely unphysical prediction of the Biermann-producing electric field and so results in erroneous predictions for the generated magnetic field. This article is part of a discussion meeting issue ‘Prospects for high gain inertial fusion energy (part 2)’.


Author(s):  
R. W. Paddock ◽  
H. Martin ◽  
R. T. Ruskov ◽  
R. H. H. Scott ◽  
W. Garbett ◽  
...  

Indirect drive inertial confinement fusion experiments with convergence ratios below 17 have been previously shown to be less susceptible to Rayleigh–Taylor hydrodynamic instabilities, making this regime highly interesting for fusion science. Additional limitations imposed on the implosion velocity, in-flight aspect ratio and applied laser power aim to further reduce instability growth, resulting in a new regime where performance can be well represented by one-dimensional (1D) hydrodynamic simulations. A simulation campaign was performed using the 1D radiation-hydrodynamics code HYADES to investigate the performance that could be achieved using direct-drive implosions of liquid layer capsules, over a range of relevant energies. Results include potential gains of 0.19 on LMJ-scale systems and 0.75 on NIF-scale systems, and a reactor-level gain of 54 for an 8.5 MJ implosion. While the use of 1D simulations limits the accuracy of these results, they indicate a sufficiently high level of performance to warrant further investigations and verification of this new low-instability regime. This potentially suggests an attractive new approach to fusion energy. This article is part of a discussion meeting issue ‘Prospects for high gain inertial fusion energy (part 2)’.


2019 ◽  
Vol 37 (01) ◽  
pp. 141-158
Author(s):  
N. Carpintero-Santamaría ◽  
J. Manuel Perlado

AbstractIn 1988 Professor Guillermo Velarde, founder of the Instituto de Fusión Nuclear (IFN), chaired the 19th European Conference on Laser Interaction with Matter held in Madrid on 3–7 October 1988. About 170 scientists from Europe, the Soviet Union, United States, Japan, Canada, Israel, Australia, China, and South Africa participated in the ECLIM 88. ECLIM 88 was among ECLIM's series a turning point in inertial confinement fusion (ICF) research. The work already performed by different laboratories in Europe, Japan, and around the world had reached a level such that without explicitly expressing it, the collective scientific consensus wanted a change in the existing close policies in several ICF areas at large Laboratories in the USA, Russia, France, and UK.Dr. Erik Storm from the US Lawrence Livermore National Laboratory proposed to Professor Velarde to write a letter to be signed by the participants of the ECLIM in favor of having an open international collaboration in ICF. Professor Velarde then suggested drawing up a manifesto instead of a letter because the name manifesto had bigger historical connotations. The manifesto received a very successful response among the conference participants and was signed by more than 130 scientists. Our paper aims at twofold objective: (1) to put into account the positive repercussions derived from the MADRID MANIFESTO in the ICF research and (2) to remember the figure of Professor Guillermo Velarde, the most influential physicist in nuclear fusion energy by inertial confinement along the 20th century. His inspiration and leadership in science contributed to make this world a safer and secure place and for us, his disciples and colleagues, an irreplaceable personality in our lives.


Author(s):  
E. Boella ◽  
R. Bingham ◽  
R. A. Cairns ◽  
P. Norreys ◽  
R. Trines ◽  
...  

Two-dimensional particle-in-cell simulations are used to explore collisionless shock acceleration in the corona plasma surrounding the compressed core of an inertial confinement fusion pellet. We show that an intense laser pulse interacting with the long scale-length plasma corona is able to launch a collisionless shock around the critical density. The nonlinear wave travels up-ramp through the plasma reflecting and accelerating the background ions. Our results suggest that protons with characteristics suitable for ion fast ignition may be achieved in this way. This article is part of a discussion meeting issue ‘Prospects for high gain inertial fusion energy (part 2)’.


Sign in / Sign up

Export Citation Format

Share Document