scholarly journals A catch-bond drives stator mechanosensitivity in the Bacterial Flagellar Motor

2017 ◽  
Author(s):  
AL Nord ◽  
E Gachon ◽  
R Perez-Carrasco ◽  
JA Nirody ◽  
A Barducci ◽  
...  

AbstractThe bacterial flagellar motor (BFM) is the rotary motor which powers the swimming and swarming of many motile bacteria. The torque is provided by stator units, ion motive force powered ion channels known to assemble and disassemble dynamically in the BFM. This turnover is mechano-sensitive, with the number of engaged units dependent upon the viscous load experienced by the motor through the flagellum. However, the molecular mechanism driving BFM mechano-sensitivity is unknown. Here we directly measure the kinetics of arrival and departure of the stator units in individual wild-type motors via analysis of high-resolution recordings of motor speed, while dynamically varying the load on the motor via external magnetic torque. Obtaining the real-time stator stoichiometry before and after periods of forced motor stall, we measure both the number of active stator units at steady-state as a function of the load and the kinetic association and dissociation rates, by fitting the data to a reversible random sequential adsorption model. Our measurements indicate that BFM mechano-sensing relies on the dissociation rate of the stator units, which decreases with increasing load, while their association rate remains constant. This implies that the lifetime of an active stator unit assembled within the BFM increases when a higher force is applied to its anchoring point in the cell wall, providing strong evidence that a catch-bond mechanism can explain the mechano-sensitivity of the BFM.

2017 ◽  
Vol 114 (49) ◽  
pp. 12952-12957 ◽  
Author(s):  
Ashley L Nord ◽  
Emilie Gachon ◽  
Ruben Perez-Carrasco ◽  
Jasmine A. Nirody ◽  
Alessandro Barducci ◽  
...  

The bacterial flagellar motor (BFM) is the rotary motor that rotates each bacterial flagellum, powering the swimming and swarming of many motile bacteria. The torque is provided by stator units, ion motive force-powered ion channels known to assemble and disassemble dynamically in the BFM. This turnover is mechanosensitive, with the number of engaged units dependent on the viscous load experienced by the motor through the flagellum. However, the molecular mechanism driving BFM mechanosensitivity is unknown. Here, we directly measure the kinetics of arrival and departure of the stator units in individual motors via analysis of high-resolution recordings of motor speed, while dynamically varying the load on the motor via external magnetic torque. The kinetic rates obtained, robust with respect to the details of the applied adsorption model, indicate that the lifetime of an assembled stator unit increases when a higher force is applied to its anchoring point in the cell wall. This provides strong evidence that a catch bond (a bond strengthened instead of weakened by force) drives mechanosensitivity of the flagellar motor complex. These results add the BFM to a short, but growing, list of systems demonstrating catch bonds, suggesting that this “molecular strategy” is a widespread mechanism to sense and respond to mechanical stress. We propose that force-enhanced stator adhesion allows the cell to adapt to a heterogeneous environmental viscosity and may ultimately play a role in surface-sensing during swarming and biofilm formation.


2019 ◽  
Vol 5 (3) ◽  
pp. eaau6885 ◽  
Author(s):  
Hui Shi ◽  
Shuwen Ma ◽  
Rongjing Zhang ◽  
Junhua Yuan

Most membrane proteins exist in complexes that carry out critical cellular functions and exhibit rich dynamics. The bacterial flagellar motor, a large membrane-spanning ion-driven rotary motor that propels the bacteria to swim, provides a canonical example. Rotation of the motor is driven by multiple torque-generating units (stators). Turnover of the stators has been shown previously, demonstrating the exchange of stator units between the motor and a membrane pool. But the details of the turnover kinetics remain unclear. Here, we directly measured the kinetics of stator turnover in individual motors via analysis of a large dataset of long-term high-resolution recordings of motor speed at high load. We found that the dwell time distribution of the stator units exhibits a multi-exponential shape, suggesting the existence of a hidden state in the turnover of the stators.


2021 ◽  
Vol 203 (9) ◽  
Author(s):  
Hiroyuki Terashima ◽  
Seiji Kojima ◽  
Michio Homma

ABSTRACT The bacterial flagellum is the motility organelle powered by a rotary motor. The rotor and stator elements of the motor are located in the cytoplasmic membrane and cytoplasm. The stator units assemble around the rotor, and an ion flux (typically H+ or Na+) conducted through a channel of the stator induces conformational changes that generate rotor torque. Electrostatic interactions between the stator protein PomA in Vibrio (MotA in Escherichia coli) and the rotor protein FliG have been shown by genetic analyses but have not been demonstrated biochemically. Here, we used site-directed photo-cross-linking and disulfide cross-linking to provide direct evidence for the interaction. We introduced a UV-reactive amino acid, p-benzoyl-l-phenylalanine (pBPA), into the cytoplasmic region of PomA or the C-terminal region of FliG in intact cells. After UV irradiation, pBPA inserted at a number of positions in PomA and formed a cross-link with FliG. PomA residue K89 gave the highest yield of cross-links, suggesting that it is the PomA residue nearest to FliG. UV-induced cross-linking stopped motor rotation, and the isolated hook-basal body contained the cross-linked products. pBPA inserted to replace residue R281 or D288 in FliG formed cross-links with the Escherichia coli stator protein, MotA. A cysteine residue introduced in place of PomA K89 formed disulfide cross-links with cysteine inserted in place of FliG residues R281 and D288 and some other flanking positions. These results provide the first demonstration of direct physical interaction between specific residues in FliG and PomA/MotA. IMPORTANCE The bacterial flagellum is a unique organelle that functions as a rotary motor. The interaction between the stator and rotor is indispensable for stator assembly into the motor and the generation of motor torque. However, the interface of the stator-rotor interaction has only been defined by mutational analysis. Here, we detected the stator-rotor interaction using site-directed photo-cross-linking and disulfide cross-linking approaches. We identified several residues in the PomA stator, especially K89, that are in close proximity to the rotor. Moreover, we identified several pairs of stator and rotor residues that interact. This study directly demonstrates the nature of the stator-rotor interaction and suggests how stator units assemble around the rotor and generate torque in the bacterial flagellar motor.


2020 ◽  
Vol 117 (43) ◽  
pp. 26766-26772
Author(s):  
Yoshiaki Kinosita ◽  
Nagisa Mikami ◽  
Zhengqun Li ◽  
Frank Braun ◽  
Tessa E. F. Quax ◽  
...  

Archaea swim using the archaellum (archaeal flagellum), a reversible rotary motor consisting of a torque-generating motor and a helical filament, which acts as a propeller. Unlike the bacterial flagellar motor (BFM), ATP (adenosine-5′-triphosphate) hydrolysis probably drives both motor rotation and filamentous assembly in the archaellum. However, direct evidence is still lacking due to the lack of a versatile model system. Here, we present a membrane-permeabilized ghost system that enables the manipulation of intracellular contents, analogous to the triton model in eukaryotic flagella and gliding Mycoplasma. We observed high nucleotide selectivity for ATP driving motor rotation, negative cooperativity in ATP hydrolysis, and the energetic requirement for at least 12 ATP molecules to be hydrolyzed per revolution of the motor. The response regulator CheY increased motor switching from counterclockwise (CCW) to clockwise (CW) rotation. Finally, we constructed the torque–speed curve at various [ATP]s and discuss rotary models in which the archaellum has characteristics of both the BFM and F1-ATPase. Because archaea share similar cell division and chemotaxis machinery with other domains of life, our ghost model will be an important tool for the exploration of the universality, diversity, and evolution of biomolecular machinery.


2018 ◽  
Vol 114 (3) ◽  
pp. 372a
Author(s):  
Ashley L. Nord ◽  
Emilie Gachon ◽  
Ruben Perez-Carrasco ◽  
Jasmine Nirody ◽  
Alessandro Barducci ◽  
...  

2008 ◽  
Vol 41 (2) ◽  
pp. 103-132 ◽  
Author(s):  
Yoshiyuki Sowa ◽  
Richard M. Berry

AbstractThe bacterial flagellar motor is a reversible rotary nano-machine, about 45 nm in diameter, embedded in the bacterial cell envelope. It is powered by the flux of H+or Na+ions across the cytoplasmic membrane driven by an electrochemical gradient, the proton-motive force or the sodium-motive force. Each motor rotates a helical filament at several hundreds of revolutions per second (hertz). In many species, the motor switches direction stochastically, with the switching rates controlled by a network of sensory and signalling proteins. The bacterial flagellar motor was confirmed as a rotary motor in the early 1970s, the first direct observation of the function of a single molecular motor. However, because of the large size and complexity of the motor, much remains to be discovered, in particular, the structural details of the torque-generating mechanism. This review outlines what has been learned about the structure and function of the motor using a combination of genetics, single-molecule and biophysical techniques, with a focus on recent results and single-molecule techniques.


2013 ◽  
Vol 110 (28) ◽  
pp. E2544-E2551 ◽  
Author(s):  
C.-J. Lo ◽  
Y. Sowa ◽  
T. Pilizota ◽  
R. M. Berry

1997 ◽  
Vol 55 (6) ◽  
pp. 7801-7804 ◽  
Author(s):  
Aravinthan D. T. Samuel ◽  
Howard C. Berg

2017 ◽  
Vol 7 (1) ◽  
Author(s):  
Maarten M. van Oene ◽  
Laura E. Dickinson ◽  
Bronwen Cross ◽  
Francesco Pedaci ◽  
Jan Lipfert ◽  
...  

Abstract The bacterial flagellar motor of Escherichia coli is a nanoscale rotary engine essential for bacterial propulsion. Studies on the power output of single motors rely on the measurement of motor torque and rotation under external load. Here, we investigate the use of magnetic tweezers, which in principle allow the application and active control of a calibrated load torque, to study single flagellar motors in Escherichia coli. We manipulate the external load on the motor by adjusting the magnetic field experienced by a magnetic bead linked to the motor, and we probe the motor’s response. A simple model describes the average motor speed over the entire range of applied fields. We extract the motor torque at stall and find it to be similar to the motor torque at drag-limited speed. In addition, use of the magnetic tweezers allows us to force motor rotation in both forward and backward directions. We monitor the motor’s performance before and after periods of forced rotation and observe no destructive effects on the motor. Our experiments show how magnetic tweezers can provide active and fast control of the external load while also exposing remaining challenges in calibration. Through their non-invasive character and straightforward parallelization, magnetic tweezers provide an attractive platform to study nanoscale rotary motors at the single-motor level.


2016 ◽  
Vol 113 (17) ◽  
pp. 4783-4787 ◽  
Author(s):  
Basarab G. Hosu ◽  
Vedavalli S. J. Nathan ◽  
Howard C. Berg

Most bacteria that swim, includingEscherichia coli, are propelled by helical filaments, each driven at its base by a rotary motor powered by a proton or a sodium ion electrochemical gradient. Each motor contains a number of stator complexes, comprising 4MotA 2MotB or 4PomA 2PomB, proteins anchored to the rigid peptidoglycan layer of the cell wall. These proteins exert torque on a rotor that spans the inner membrane. A shaft connected to the rotor passes through the peptidoglycan and the outer membrane through bushings, the P and L rings, connecting to the filament by a flexible coupling known as the hook. Although the external components, the hook and the filament, are known to rotate, having been tethered to glass or marked by latex beads, the rotation of the internal components has remained only a reasonable assumption. Here, by using polarized light to bleach and probe an internal YFP-FliN fusion, we show that the innermost components of the cytoplasmic ring rotate at a rate similar to that of the hook.


Sign in / Sign up

Export Citation Format

Share Document