Effects of grain size distribution on the packing fraction and shear strength of frictionless disk packings

2016 ◽  
Vol 94 (6) ◽  
Author(s):  
Nicolas Estrada
2009 ◽  
pp. 83-91 ◽  
Author(s):  
Gordana Hadzi-Nikovic

There is a negative pore water pressure or matric suction in the zone above the ground water level in silty loess soil, which can be as deep as 5-10 m in the Belgrade area. This primary characteristic of unsaturated soil, i.e., matric suction, should be included in laboratory testing and geotechnical analyses. Direct shear or triaxial testing of unsaturated soil are very expensive and time-consuming and require specially modified equipment. Instead, the prediction of unsaturated shear strength using the soil water characteristic curve, SWCC, and the effective shear strength parameters c' and ?' is a widely accepted practice. In this study, constitutive soil-water characteristic curves were obtained from the results of experimental testing by draining saturated soil samples under different pressures. This testing was performed for the first time in Serbia in a 15 bar pressure plate extractor according to ASTM standards. The laboratory testing included natural samples of loess sediments with the original macroporous structure and loess sediments with a destroyed soil structure. The influence of the grain-size distribution and natural soil structure on the unsaturated shear strength of Belgrade loess sediments above the ground water level was also evaluated. The obtained results are in accordance with the results from other investigations.


1970 ◽  
Vol 2 (2) ◽  
pp. K69-K73 ◽  
Author(s):  
M. Reinbold ◽  
H. Hoffmann

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 2849
Author(s):  
Marcin Jan Dośpiał

This paper presents domain and structure studies of bonded magnets made from nanocrystalline Nd-(Fe, Co)-B powder. The structure studies were investigated using scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), Mössbauer spectroscopy and X-ray diffractometry. On the basis of performed qualitative and quantitative phase composition studies, it was found that investigated alloy was mainly composed of Nd2(Fe-Co)14B hard magnetic phase (98 vol%) and a small amount of Nd1.1Fe4B4 paramagnetic phase (2 vol%). The best fit of grain size distribution was achieved for the lognormal function. The mean grain size determined from transmission electron microscopy (TEM) images on the basis of grain size distribution and diffraction pattern using the Bragg equation was about ≈130 nm. HRTEM images showed that over-stoichiometric Nd was mainly distributed on the grain boundaries as a thin amorphous border of 2 nm in width. The domain structure was investigated using a scanning electron microscope and metallographic light microscope, respectively, by Bitter and Kerr methods, and by magnetic force microscopy. Domain structure studies revealed that the observed domain structure had a labyrinth shape, which is typically observed in magnets, where strong exchange interactions between grains are present. The analysis of the domain structure in different states of magnetization revealed the dynamics of the reversal magnetization process.


Author(s):  
Anna Dobkowska ◽  
Boguslawa Adamczyk – Cieślak ◽  
Dariusz Kuc ◽  
Eugeniusz Hadasik ◽  
Tomasz Płociński ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document