A complex pseudo-decagonal quasicrystal approximant, Al37(Co,Ni)15.5, solved by rotation electron diffraction

2014 ◽  
Vol 47 (1) ◽  
pp. 215-221 ◽  
Author(s):  
Devinder Singh ◽  
Yifeng Yun ◽  
Wei Wan ◽  
Benjamin Grushko ◽  
Xiaodong Zou ◽  
...  

Electron diffraction is a complementary technique to single-crystal X-ray diffraction and powder X-ray diffraction for structure solution of unknown crystals. Crystals too small to be studied by single-crystal X-ray diffraction or too complex to be solved by powder X-ray diffraction can be studied by electron diffraction. The main drawbacks of electron diffraction have been the difficulties in collecting complete three-dimensional electron diffraction data by conventional electron diffraction methods and the very time-consuming data collection. In addition, the intensities of electron diffraction suffer from dynamical scattering. Recently, a new electron diffraction method, rotation electron diffraction (RED), was developed, which can overcome the drawbacks and reduce dynamical effects. A complete three-dimensional electron diffraction data set can be collected from a sub-micrometre-sized single crystal in less than 2 h. Here the RED method is applied forab initiostructure determination of an unknown complex intermetallic phase, the pseudo-decagonal (PD) quasicrystal approximant Al37.0(Co,Ni)15.5, denoted as PD2. RED shows that the crystal is F-centered, witha= 46.4,b= 64.6,c= 8.2 Å. However, as with other approximants in the PD series, the reflections with oddlindices are much weaker than those withleven, so it was decided to first solve the PD2 structure in the smaller, primitive unit cell. The basic structure of PD2 with unit-cell parametersa= 23.2,b= 32.3,c= 4.1 Å and space groupPnmmhas been solved in the present study. The structure withc= 8.2 Å will be taken up in the near future. The basic structure contains 55 unique atoms (17 Co/Ni and 38 Al) and is one of the most complex structures solved by electron diffraction. PD2 is built of characteristic 2 nm wheel clusters with fivefold rotational symmetry, which agrees with results from high-resolution electron microscopy images. Simulated electron diffraction patterns for the structure model are in good agreement with the experimental electron diffraction patterns obtained by RED.

Author(s):  
Tatiana E. Gorelik ◽  
Jacco van de Streek ◽  
Herbert Meier ◽  
Lars Andernach ◽  
Till Opatz

The solid-state structure of star-shaped 2,4,6-tris{(E)-2-[4-(dimethylamino)-phenyl]ethenyl}-1,3,5-triazine is determined from a powder sample by exploiting the respective strengths of single-crystal three-dimensional electron diffraction and powder X-ray diffraction data. The unit-cell parameters were determined from single crystal electron diffraction data. Using this information, the powder X-ray diffraction data were indexed, and the crystal structure was determined from the powder diffraction profile. The compound crystallizes in a noncentrosymmetric space group,P212121. The molecular conformation in the crystal structure was used to calculate the molecular dipole moment of 3.22 Debye, which enables the material to show nonlinear optical effects.


2018 ◽  
Vol 51 (4) ◽  
pp. 1094-1101 ◽  
Author(s):  
Yunchen Wang ◽  
Taimin Yang ◽  
Hongyi Xu ◽  
Xiaodong Zou ◽  
Wei Wan

The continuous rotation electron diffraction (cRED) method has the capability of providing fast three-dimensional electron diffraction data collection on existing and future transmission electron microscopes; unknown structures could be potentially solved and refined using cRED data collected from nano- and submicrometre-sized crystals. However, structure refinements of cRED data using SHELXL often lead to relatively high R1 values when compared with those refined against single-crystal X-ray diffraction data. It is therefore necessary to analyse the quality of the structural models refined against cRED data. In this work, multiple cRED data sets collected from different crystals of an oxofluoride (FeSeO3F) and a zeolite (ZSM-5) with known structures are used to assess the data consistency and quality and, more importantly, the accuracy of the structural models refined against these data sets. An evaluation of the precision and consistency of the cRED data by examination of the statistics obtained from the data processing software DIALS is presented. It is shown that, despite the high R1 values caused by dynamical scattering and other factors, the refined atomic positions obtained from the cRED data collected for different crystals are consistent with those of the reference models refined against single-crystal X-ray diffraction data. The results serve as a reference for the quality of the cRED data and the achievable accuracy of the structural parameters.


2014 ◽  
Vol 70 (a1) ◽  
pp. C1449-C1449
Author(s):  
Tao Zhang ◽  
Shifeng Jin ◽  
Yuanxin Gu ◽  
Yao He ◽  
Haifu Fan

With the serial femtosecond crystallography (SFX) [1] using hard X-ray free-electron laser as light source, it is possible to obtained three-dimensional single-crystal diffraction data from powder samples consisting of submicron crystal grains. This offers two advantages. First, complicated crystal structures far beyond the ability of powder X-ray diffraction analysis now can be solved easily; second, mixtures of two or more crystalline components can be examined in a single experiment. The percentage of each component can be determined accurately and the crystal structure of them can be solved readily. Simulating calculations were performed with a mixture of two different kinds of zeolites. The program suite CrystFEL [2] was used for simulating SFX diffraction patterns, diffraction indexing and Monte-Carlo integration of diffraction intensities. The program suite SHELX [3] was used for structure determination. Satisfactory results have been obtained and will be discussed in detail.


Science ◽  
2018 ◽  
Vol 361 (6397) ◽  
pp. 48-52 ◽  
Author(s):  
Tianqiong Ma ◽  
Eugene A. Kapustin ◽  
Shawn X. Yin ◽  
Lin Liang ◽  
Zhengyang Zhou ◽  
...  

The crystallization problem is an outstanding challenge in the chemistry of porous covalent organic frameworks (COFs). Their structural characterization has been limited to modeling and solutions based on powder x-ray or electron diffraction data. Single crystals of COFs amenable to x-ray diffraction characterization have not been reported. Here, we developed a general procedure to grow large single crystals of three-dimensional imine-based COFs (COF-300, hydrated form of COF-300, COF-303, LZU-79, and LZU-111). The high quality of the crystals allowed collection of single-crystal x-ray diffraction data of up to 0.83-angstrom resolution, leading to unambiguous solution and precise anisotropic refinement. Characteristics such as degree of interpenetration, arrangement of water guests, the reversed imine connectivity, linker disorder, and uncommon topology were deciphered with atomic precision—aspects impossible to determine without single crystals.


2007 ◽  
Vol 62 (4) ◽  
pp. 613-616 ◽  
Author(s):  
Wilfried Hermes ◽  
Ute Ch. Rodewald ◽  
Bernard Chevalier ◽  
Rainer Pötgena

The intermetallic cerium compounds CePdGe, CePtSi, and CePtGe were synthesized from the elements by arc-melting and subsequent annealing. The structure of CePtSi was refined from single crystal X-ray diffraction data: LaPtSi-type (ordered α-ThSi2 version), 141md, a = 419.6(1) and c = 1450.0(5) pm, wR2 = 0.0490, 362 F2 values and 16 variables. The Pt-Si distances within the three-dimensional [PtSi] network are 242 pm, indicating strong Pt-Si interactions. Hydrogenation of the three compounds at 623 K and 4 MPa H2 gave no indication for hydride formation.


eLife ◽  
2013 ◽  
Vol 2 ◽  
Author(s):  
Oliver B Zeldin ◽  
Axel T Brunger

A protein structure has been refined with electron diffraction data obtained by using a very weak electron beam to collect large numbers of diffraction patterns from a few sub-micron-sized three-dimensional crystals.


2013 ◽  
Vol 69 (7) ◽  
pp. 1223-1230 ◽  
Author(s):  
Igor Nederlof ◽  
Eric van Genderen ◽  
Yao-Wang Li ◽  
Jan Pieter Abrahams

When protein crystals are submicrometre-sized, X-ray radiation damage precludes conventional diffraction data collection. For crystals that are of the order of 100 nm in size, at best only single-shot diffraction patterns can be collected and rotation data collection has not been possible, irrespective of the diffraction technique used. Here, it is shown that at a very low electron dose (at most 0.1 e− Å−2), a Medipix2 quantum area detector is sufficiently sensitive to allow the collection of a 30-frame rotation series of 200 keV electron-diffraction data from a single ∼100 nm thick protein crystal. A highly parallel 200 keV electron beam (λ = 0.025 Å) allowed observation of the curvature of the Ewald sphere at low resolution, indicating a combined mosaic spread/beam divergence of at most 0.4°. This result shows that volumes of crystal with low mosaicity can be pinpointed in electron diffraction. It is also shown that strategies and data-analysis software (MOSFLMandSCALA) from X-ray protein crystallography can be used in principle for analysing electron-diffraction data from three-dimensional nanocrystals of proteins.


2021 ◽  
Author(s):  
Zhehao Huang ◽  
Tom Willhammar ◽  
Xiaodong Zou

Three-dimensional electron diffraction is a powerful tool for accurate structure determination of zeolite, MOF, and COF crystals that are too small for X-ray diffraction. By revealing the structural details, the properties of the materials can be understood, and new materials and applications can be designed.


Sign in / Sign up

Export Citation Format

Share Document