scholarly journals Synchrotron microcrystal native-SAD phasing at a low energy

IUCrJ ◽  
2019 ◽  
Vol 6 (4) ◽  
pp. 532-542 ◽  
Author(s):  
Gongrui Guo ◽  
Ping Zhu ◽  
Martin R. Fuchs ◽  
Wuxian Shi ◽  
Babak Andi ◽  
...  
Keyword(s):  
Data Analysis ◽  
Data Collection ◽  
Diffraction Data ◽  
De Novo ◽  
Low Energy ◽  
Anomalous Scattering ◽  
Free Electron Lasers ◽  
X Ray ◽  
Structural Evaluation ◽  
Sad Phasing

De novo structural evaluation of native biomolecules from single-wavelength anomalous diffraction (SAD) is a challenge because of the weakness of the anomalous scattering. The anomalous scattering from relevant native elements – primarily sulfur in proteins and phosphorus in nucleic acids – increases as the X-ray energy decreases toward their K-edge transitions. Thus, measurements at a lowered X-ray energy are promising for making native SAD routine and robust. For microcrystals with sizes less than 10 µm, native-SAD phasing at synchrotron microdiffraction beamlines is even more challenging because of difficulties in sample manipulation, diffraction data collection and data analysis. Native-SAD analysis from microcrystals by using X-ray free-electron lasers has been demonstrated but has required use of thousands of thousands of microcrystals to achieve the necessary accuracy. Here it is shown that by exploitation of anomalous microdiffraction signals obtained at 5 keV, by the use of polyimide wellmounts, and by an iterative crystal and frame-rejection method, microcrystal native-SAD phasing is possible from as few as about 1 200 crystals. Our results show the utility of low-energy native-SAD phasing with microcrystals at synchrotron microdiffraction beamlines.

scholarly journals EM-detwin: A Program for Resolving Indexing Ambiguity in Serial Crystallography Using the Expectation-Maximization Algorithm

Crystals ◽  
2020 ◽  
Vol 10 (7) ◽  
pp. 588
Author(s):  
Yingchen Shi ◽  
Haiguang Liu
Keyword(s):  
Data Analysis ◽  
Diffraction Data ◽  
Expectation Maximization ◽  
Expectation Maximization Algorithm ◽  
Atomic Resolution ◽  
Group Symmetry ◽  
Bravais Lattice ◽  
Free Electron Lasers ◽  
X Ray ◽  
Serial Crystallography

Serial crystallography (SX), first used as an application of X-ray free-electron lasers (XFELs), is becoming a useful method to determine atomic-resolution structures of proteins from micrometer-sized crystals with bright X-ray sources. Because of unknown orientations of crystals in SX, indexing ambiguity issue arises when the symmetry of Bravais lattice is higher than the space group symmetry, making some diffraction signals wrongly merged to the total intensity in twinned orientations. In this research, we developed a program within the CrystFEL framework, the EM-detwin, to resolve this indexing ambiguity problem based on the expectation-maximization algorithm. Testing results on the performance of the EM-detwin have demonstrated its usefulness in correctly indexing diffraction data as a valuable tool for SX data analysis.

scholarly journals Advancing Native-SAD Phasing at Synchrotron with 13 Real-life Case Studies

2014 ◽  
Vol 70 (a1) ◽  
pp. C601-C601
Author(s):  
Meitian Wang
Keyword(s):  
Data Collection ◽  
Single Crystal ◽  
Measurement Errors ◽  
Model Building ◽  
De Novo ◽  
Real Life ◽  
Data Sets ◽  
X Ray ◽  
Recent Developments ◽  
Sad Phasing

The key step in elucidating de novo 3D X-ray structures relies on the incorporation of heavy elements into proteins or crystals. Selenomethionine incorporation or heavy metal derivatization are however not always possible and require additional efforts. Exploiting anomalous signals from intrinsically present elements like S, P, and Ca2+ from proteins and nucleic acids, as well as Cl-, SO42-, and PO42- from crystallization solutions, is therefore an appealing alternative. Such a method has been shown to be valid by collecting data from several crystals and combining them(1). Recent developments at macromolecular crystallography beamlines are however pushing the limits of what could be obtained out of a single crystal. Here we introduce a novel data collection routine for native-SAD phasing, which distributes tolerable X-ray life-doses to very high multiplicity X-ray diffraction data sets measured at 6 keV energy and at different crystal orientations on a single crystal. This allows the extraction of weak anomalous signals reliably by reducing both systematic and random measurement errors. The data collection method has been applied successfully to thirteen real-life examples including membrane proteins, a protein/DNA complex, and a large protein complex. In addition to de novo structure determination, we advocate such a data collection protocol for molecular replacement solvable structures where unbiased phase information is crucial in objective map interpretation and model building, especially for medium and low-resolution cases.

scholarly journals Low Multiplicity Sulfur SAD Phasing in the Home lab

2014 ◽  
Vol 70 (a1) ◽  
pp. C607-C607 ◽  
Author(s):  
Severine Freisz ◽  
Juergen Graf ◽  
Matthew Benning ◽  
Vernon Smith
Keyword(s):  
De Novo ◽  
Structural Information ◽  
Low Noise ◽  
Intensity Difference ◽  
Anomalous Scattering ◽  
High Quality ◽  
X Ray ◽  
Sad Phasing ◽  
Very High

Advances in crystallographic hardware and software are enabling structural biologists to investigate more challenging projects. Recent developments in hardware and software are greatly increasing the capabilities of in-house diffraction systems making it more routine to obtain de novo structural information in the home lab. Single-wavelength anomalous diffraction (SAD) techniques with Cu Ka or Ga Ka radiation are now widely used for structure solution even in cases involving weak anomalous scatterers, like sulfur. We have now introduced the D8 Venture solution for structural biology with the PHOTON 100 detector featuring the first CMOS active pixel sensor for X-ray crystallography. Our new microfocus source, the METALJET delivers beam intensity exceeding those of typical bending-magnet beamlines. The very high intensity, the small beam focus and the lower air scatter produced by Gallium Kα radiation help to greatly reduce the background scatter. This provides greater signal to noise essential to identify weak anomalous signal. Due to the very weak anomalous scattering of S, data multiplicities in the order of 40 are typically necessary to obtain phases by S-SAD. Collecting high-multiplicity data minimizes systematic experimental errors to measure with very high accuracy the minute intensity difference between Friedel Pairs (1.0 – 1.5 %) [1]. This requires software which optimizes the collection strategy, for example with respect to overall data collection time to minimize radiation damage. The combination of a brighter, more stable X-ray source with a high sensitivity low noise detector have greatly improved the quality of data collected in-house. The high quality allows successful SAD measurements far away from the absorption edge. Here we present a low multiplicity sulfur-SAD phasing experiment on a small Thaumatin crystal showing the high quality of the data collected on the D8 VENTURE with the METALJET.

scholarly journals Making routine native SAD a reality: lessons from beamline X06DA at the Swiss Light Source

2019 ◽  
Vol 75 (3) ◽  
pp. 262-271 ◽  
Author(s):  
Shibom Basu ◽  
Aaron Finke ◽  
Laura Vera ◽  
Meitian Wang ◽  
Vincent Olieric
Keyword(s):  
Data Collection ◽  
Light Source ◽  
Low Dose ◽  
Model Building ◽  
De Novo ◽  
Anomalous Scattering ◽  
Orientation Data ◽  
Swiss Light Source ◽  
Experimental Phasing ◽  
Sad Phasing

Native single-wavelength anomalous dispersion (SAD) is the most attractive de novo phasing method in macromolecular crystallography, as it directly utilizes intrinsic anomalous scattering from native crystals. However, the success of such an experiment depends on accurate measurements of the reflection intensities and therefore on careful data-collection protocols. Here, the low-dose, multiple-orientation data-collection protocol for native SAD phasing developed at beamline X06DA (PXIII) at the Swiss Light Source is reviewed, and its usage over the last four years on conventional crystals (>50 µm) is reported. Being experimentally very simple and fast, this method has gained popularity and has delivered 45 de novo structures to date (13 of which have been published). Native SAD is currently the primary choice for experimental phasing among X06DA users. The method can address challenging cases: here, native SAD phasing performed on a streptavidin–biotin crystal with P21 symmetry and a low Bijvoet ratio of 0.6% is highlighted. The use of intrinsic anomalous signals as sequence markers for model building and the assignment of ions is also briefly described.

scholarly journals Data Exploration Toolkitfor serial diffraction experiments

2015 ◽  
Vol 71 (2) ◽  
pp. 352-356 ◽  
Author(s):  
Oliver B. Zeldin ◽  
Aaron S. Brewster ◽  
Johan Hattne ◽  
Monarin Uervirojnangkoorn ◽  
Artem Y. Lyubimov ◽  
...  
Keyword(s):  
Data Collection ◽  
Diffraction Data ◽  
Data Exploration ◽  
Data Sets ◽  
Significant Heterogeneity ◽  
Free Electron Lasers ◽  
X Ray ◽  
Experimental Strategy ◽  
Serial Crystallography

Ultrafast diffraction at X-ray free-electron lasers (XFELs) has the potential to yield new insights into important biological systems that produce radiation-sensitive crystals. An unavoidable feature of the `diffraction before destruction' nature of these experiments is that images are obtained from many distinct crystals and/or different regions of the same crystal. Combined with other sources of XFEL shot-to-shot variation, this introduces significant heterogeneity into the diffraction data, complicating processing and interpretation. To enable researchers to get the most from their collected data, a toolkit is presented that provides insights into the quality of, and the variation present in, serial crystallography data sets. These tools operate on the unmerged, partial intensity integration results from many individual crystals, and can be used on two levels: firstly to guide the experimental strategy during data collection, and secondly to help users make informed choices during data processing.

scholarly journals Identification of the point of diminishing returns in high-multiplicity data collection for sulfur SAD phasing

2017 ◽  
Vol 24 (1) ◽  
pp. 19-28 ◽  
Author(s):  
Selina L. S. Storm ◽  
Fabio Dall'Antonia ◽  
Gleb Bourenkov ◽  
Thomas R. Schneider
Keyword(s):  
Data Collection ◽  
Data Quality ◽  
Radiation Damage ◽  
Diffraction Data ◽  
High Multiplicity ◽  
X Ray ◽  
Anomalous Data ◽  
Diminishing Returns ◽  
Sad Phasing

High-quality high-multiplicity X-ray diffraction data were collected on five different crystals of thaumatin using a homogeneous-profile X-ray beam at E = 8 keV to investigate the counteracting effects of increased multiplicity and increased radiation damage on the quality of anomalous diffraction data collected on macromolecular crystals. By comparing sulfur substructures obtained from subsets of the data selected as a function of absorbed X-ray dose with sulfur positions in the respective refined reference structures, the doses at which the highest quality of anomalous differences could be obtained were identified for the five crystals. A statistic σ{ΔF} D , calculated as the width σ of the normalized distribution of a set {ΔF} of anomalous differences collected at a dose D, is suggested as a measure of anomalous data quality as a function of dose. An empirical rule is proposed to identify the dose at which the gains in data quality due to increased multiplicity are outbalanced by the losses due to decreases in signal-to-noise as a consequence of radiation damage. Identifying this point of diminishing returns allows the optimization of the choice of data collection parameters and the selection of data to be used in subsequent crystal structure determination steps.

scholarly journals Protein structure determination by single-wavelength anomalous diffraction phasing of X-ray free-electron laser data

IUCrJ ◽  
2016 ◽  
Vol 3 (3) ◽  
pp. 180-191 ◽  
Author(s):  
Karol Nass ◽  
Anton Meinhart ◽  
Thomas R. M. Barends ◽  
Lutz Foucar ◽  
Alexander Gorel ◽  
...  
Keyword(s):  
Structure Determination ◽  
Free Electron ◽  
De Novo ◽  
Protein Structure Determination ◽  
Anomalous Scattering ◽  
X Ray ◽  
Sad Phasing ◽  
Anomalous Signal ◽  
Serial Femtosecond Crystallography

Serial femtosecond crystallography (SFX) at X-ray free-electron lasers (XFELs) offers unprecedented possibilities for macromolecular structure determination of systems that are prone to radiation damage. However, phasing XFEL datade novois complicated by the inherent inaccuracy of SFX data, and only a few successful examples, mostly based on exceedingly strong anomalous or isomorphous difference signals, have been reported. Here, it is shown that SFX data from thaumatin microcrystals can be successfully phased using only the weak anomalous scattering from the endogenous S atoms. Moreover, a step-by-step investigation is presented of the particular problems of SAD phasing of SFX data, analysing data from a derivative with a strong anomalous signal as well as the weak signal from endogenous S atoms.

Challenges of sulfur SAD phasing as a routine method in macromolecular crystallography

2011 ◽  
Vol 19 (1) ◽  
pp. 19-29 ◽  
Author(s):  
James Doutch ◽  
Michael A. Hough ◽  
S. Samar Hasnain ◽  
Richard W. Strange
Keyword(s):  
Model Building ◽  
De Novo ◽  
Protein Structures ◽  
Anomalous Scattering ◽  
X Ray ◽  
Long Wavelength ◽  
Structure Solution ◽  
Average Proportion ◽  
Sad Phasing

The sulfur SAD phasing method allows the determination of protein structuresde novowithout reference to derivatives such as Se-methionine. The feasibility for routine automated sulfur SAD phasing using a number of current protein crystallography beamlines at several synchrotrons was examined using crystals of trimericAchromobacter cycloclastesnitrite reductase (AcNiR), which contains a near average proportion of sulfur-containing residues and two Cu atoms per subunit. Experiments using X-ray wavelengths in the range 1.9–2.4 Å show that we are not yet at the level where sulfur SAD is routinely successful forautomatedstructure solution and model building using existing beamlines and current software tools. On the other hand, experiments using the shortest X-ray wavelengths available on existing beamlines could be routinely exploited to solve and produce unbiased structural models using the similarly weak anomalous scattering signals from the intrinsic metal atoms in proteins. The comparison of long-wavelength phasing (the Bijvoet ratio for nine S atoms and two Cu atoms is ∼1.25% at ∼2 Å) and copper phasing (the Bijvoet ratio for two Cu atoms is 0.81% at ∼0.75 Å) forAcNiR suggests that lower data multiplicity than is currently required for success should in general be possible for sulfur phasing if appropriate improvements to beamlines and data collection strategies can be implemented.

scholarly journals Optimization in S-SAD phasing - difference between solved and unsolved structure

2014 ◽  
Vol 70 (a1) ◽  
pp. C613-C613
Author(s):  
Jan Stránský ◽  
Tomáš Kovaľ ◽  
Lars Østergaard ◽  
Jarmila Dušková ◽  
Tereza Skálová ◽  
...  
Keyword(s):  
Data Processing ◽  
De Novo ◽  
Protein Structures ◽  
X Ray Diffraction ◽  
X Ray ◽  
Structure Solution ◽  
Sad Phasing ◽  
Optimal Values ◽  
Grant Agency ◽  
Intensity Reading

Development of X-ray diffraction technologies have made de novo phasing of protein structures by single-wavelength anomalous dispersion by sulphur (S-SAD) more common. As anomalous differences in the sulphur atomic factors are in the order of errors of measurement, careful intensity reading and data processing are crucial. S-SAD was used for de novo phasing of a small 12 kDa protein with 4 sulphur atoms per molecule at 2.3 Å, where the data did not enable a straightforward structure solution. Data processing was performed using XDS [1] and scaling using XSCALE. The sulphur substructure was determined by SHELXD [2] and phases were obtained from SHELXE [2]. Both algorithms strongly depend on input parameters and default values did not lead to the correct phases. Therefore a systematic search of optimal values of several parameters was used to find a solution. This method helped to confirm sulphur substructure and to differentiate the handedness of the solutions. Moreover, a script for comfortable conversion of SHELX outputs to MTZ format was developed, using programmes included in the CCP4 package [3]. The previously unsolvable protein structure was successfully resolved with the described procedure. This work was supported by the Grant Agency of the Czech Technical University in Prague, (SGS13/219/OHK4/3T/14), the Czech Science Foundation (P302/11/0855), project BIOCEV CZ.1.05/1.1.00/02.0109 from the ERDF.

Sign in / Sign up

Export Citation Format

Share Document