scholarly journals Electron diffraction tomography for structure analysis of nanomaterials

2014 ◽  
Vol 70 (a1) ◽  
pp. C367-C367
Author(s):  
Tatiana Gorelik

For decades electron crystallography had not been considered as a reliable method of structure analysis, being more a curious scattering experiment. The introduction of electron diffraction tomography brought to light a novel structure analysis technique able to resolve structures of nanocrystalline samples, not assessable by other methods. Electron diffraction tomography is based on the systematically sampling of the reciprocal space by means of electron diffraction. Being in principle very close to single crystal X-ray diffraction experiment, electron diffraction has nevertheless specialities, which make it in a first row an attractive alternative technique, on the other side a demanding experiment and not straight-forward data analysis. The power of electron diffraction tomography method has been clearly demonstrated within the last years – a number of crystalline structures of various material types has been solved. The achievements and potentials of electron diffraction tomography method will be presented, supported by numerous structure analysis examples.

2017 ◽  
Vol 81 (5) ◽  
pp. 1191-1202 ◽  
Author(s):  
Fernando Colombo ◽  
Enrico Mugnaioli ◽  
Oriol Vallcorba ◽  
Alberto García ◽  
Alejandro R. Goñi ◽  
...  

AbstractThe crystal structure of karibibite, Fe33+(As3+O2)4(As23+O5)(OH), from the Urucum mine (Minas Gerais, Brazil), was solved and refined from electron diffraction tomography data [R1 = 18.8% for F > 4σ(F)] and further confirmed by synchrotron X-ray diffraction and density functional theory (DFT) calculations. The mineral is orthorhombic, space group Pnma and unit-cell parameters (synchrotron X-ray diffraction) are a = 7.2558(3), b = 27.992(1), c = 6.5243 (3) Å, V = 1325.10(8) Å3, Z = 4. The crystal structure of karibibbite consists of bands of Fe3+O6 octahedra running along a framed by two chains of AsO3 trigonal pyramids at each side, and along c by As2O5 dimers above and below. Each band is composed of ribbons of three edge-sharing Fe3+O6 octahedra, apex-connected with other ribbons in order to form a kinked band running along a. The atoms As(2) and As(3), each showing trigonal pyramidal coordination by O, share the O(4) atom to form a dimer. In turn, dimers are connected by the O(3) atoms, defining a zig-zag chain of overall (As3+O2)n-n stoichiometry. Each ribbon of (Fe3+O6) octahedra is flanked on both edges by the (As3+O2)n-n chains. The simultaneous presence of arsenite chains and dimers is previously unknown in compounds with As3+. The lone-electron pairs (4s2) of the As(2) and As(3) atoms project into the interlayer located at y = 0 and y = ½, yielding probable weak interactions with the O atoms of the facing (AsO2) chain.The DFT calculations show that the Fe atoms have maximum spin polarization, consistent with the Fe3+ state.


2017 ◽  
Vol 56 (11) ◽  
pp. 6404-6409 ◽  
Author(s):  
Christophe Lepoittevin ◽  
Justin Jeanneau ◽  
Pierre Toulemonde ◽  
André Sulpice ◽  
Manuel Núñez-Regueiro

Author(s):  
Robert M. Glaeser ◽  
David W. Deamer

In the investigation of the molecular organization of cell membranes it is often supposed that lipid molecules are arranged in a bimolecular film. X-ray diffraction data obtained in a direction perpendicular to the plane of suitably layered membrane systems have generally been interpreted in accord with such a model of the membrane structure. The present studies were begun in order to determine whether selected area electron diffraction would provide a tool of sufficient sensitivity to permit investigation of the degree of intermolecular order within lipid films. The ultimate objective would then be to apply the method to single fragments of cell membrane material in order to obtain data complementary to the transverse data obtainable by x-ray diffraction.


Author(s):  
William F. Tivol ◽  
Murray Vernon King ◽  
D. F. Parsons

Feasibility of isomorphous substitution in electron diffraction is supported by a calculation of the mean alteration of the electron-diffraction structure factors for hemoglobin crystals caused by substituting two mercury atoms per molecule, following Green, Ingram & Perutz, but with allowance for the proportionality of f to Z3/4 for electron diffraction. This yields a mean net change in F of 12.5%, as contrasted with 22.8% for x-ray diffraction.Use of the hydration chamber in electron diffraction opens prospects for examining many proteins that yield only very thin crystals not suitable for x-ray diffraction. Examination in the wet state avoids treatments that could cause translocation of the heavy-atom labels or distortion of the crystal. Combined with low-fluence techniques, it enables study of the protein in a state as close to native as possible.We have undertaken a study of crystals of rat hemoglobin by electron diffraction in the wet state. Rat hemoglobin offers a certain advantage for hydration-chamber work over other hemoglobins in that it can be crystallized from distilled water instead of salt solutions.


Author(s):  
Y. P. Lin ◽  
J. S. Xue ◽  
J. E. Greedan

A new family of high temperature superconductors based on Pb2Sr2YCu3O9−δ has recently been reported. One method of improving Tc has been to replace Y partially with Ca. Although the basic structure of this type of superconductors is known, the detailed structure is still unclear, and various space groups has been proposed. In our work, crystals of Pb2Sr2YCu3O9−δ with dimensions up to 1 × 1 × 0.25.mm and with Tc of 84 K have been grown and their superconducting properties described. The defects and crystal symmetry have been investigated using electron microscopy performed on crushed crystals supported on a holey carbon film.Electron diffraction confirmed x-ray diffraction results which showed that the crystals are primitive orthorhombic with a=0.5383, b=0.5423 and c=1.5765 nm. Convergent Beam Electron Diffraction (CBED) patterns for the and axes are shown in Figs. 1 and 2 respectively.


Author(s):  
M. Vallet-Regí ◽  
M. Parras ◽  
J.M. González-Calbet ◽  
J.C. Grenier

BaFeO3-y compositions (0.35<y<0.50) have been investigated by means of electron diffraction and microscopy to resolve contradictory results from powder X-ray diffraction data.The samples were obtained by annealing BaFeO2.56 for 48 h. in the temperature range from 980°C to 1050°C . Total iron and barium in the samples were determined using chemical analysis and gravimetric methods, respectively.In the BaFeO3-y system, according to the electron diffraction and microscopy results, the nonstoichiometry is accommodated in different ways as a function of the composition (y):In the domain between BaFeO2.5+δBaFeO2.54, compositional variations are accommodated through the formation of microdomains. Fig. la shows the ED pattern of the BaFeO2.52 material along thezone axis. The corresponding electron micrograph is seen in Fig. 1b. Several domains corresponding to the monoclinic BaFeO2.50 phase, intergrow with domains of the orthorhombic phase. According to that, the ED pattern of Fig. 1a, can be interpreted as formed by the superposition of three types of diffraction maxima : Very strong spots corresponding to a cubic perovskite, a set of maxima due to the superposition of three domains of the monoclinic phase along [100]m and a series of maxima corresponding to three domains corresponding to the orthorhombic phase along the [100]o.


2003 ◽  
Vol 104 ◽  
pp. 27-30 ◽  
Author(s):  
T. Beetz ◽  
C. Jacobsen ◽  
C.-C. Kao ◽  
J. Kirz ◽  
O. Mentes ◽  
...  

Author(s):  
David S. Wragg ◽  
Georgios N. Kalantzopoulos ◽  
Dimitrios K. Pappas ◽  
Irene Pinilla-Herrero ◽  
Daniel Rojo-Gama ◽  
...  

2000 ◽  
Vol 5 (S1) ◽  
pp. 97-103
Author(s):  
Kathleen A. Dunn ◽  
Susan E. Babcock ◽  
Donald S. Stone ◽  
Richard J. Matyi ◽  
Ling Zhang ◽  
...  

Diffraction-contrast TEM, focused probe electron diffraction, and high-resolution X-ray diffraction were used to characterize the dislocation arrangements in a 16µm thick coalesced GaN film grown by MOVPE LEO. As is commonly observed, the threading dislocations that are duplicated from the template above the window bend toward (0001). At the coalescence plane they bend back to lie along [0001] and thread to the surface. In addition, three other sets of dislocations were observed. The first set consists of a wall of parallel dislocations lying in the coalescence plane and nearly parallel to the substrate, with Burgers vector (b) in the (0001) plane. The second set is comprised of rectangular loops with b = 1/3 [110] (perpendicular to the coalescence boundary) which originate in the coalescence boundary and extend laterally into the film on the (100). The third set of dislocations threads laterally through the film along the [100] bar axis with 1/3<110>-type Burgers vectors These sets result in a dislocation density of ∼109 cm−2. High resolution X-ray reciprocal space maps indicate wing tilt of ∼0.5º.


1995 ◽  
Vol 396 ◽  
Author(s):  
J.K.N. Lindner ◽  
B. Götz ◽  
A. Frohnwieser ◽  
B. Stritzker

AbstractWell-defined, homogenous, deep-buried 3C-SiC layers have been formed in silicon by ion beam synthesis using MeV C+ ions. Layers are characterized by RBS/channeling, X-ray diffraction, x-sectional TEM and electron diffraction. The redistribution of implanted carbon atoms into a rectangular carbon depth distribution associated with a well-defined layer during the post-implantation anneal is shown to depend strongly on the existence of crystalline carbide precipitates in the as-implanted state.


Sign in / Sign up

Export Citation Format

Share Document