Optimal design and control of gas‐turbine engine components: a multicriteria approach

1997 ◽  
Vol 69 (6) ◽  
pp. 518-526 ◽  
Author(s):  
I.N. Egorov ◽  
G.V. Kretinin ◽  
I.A. Leshchenko
Keyword(s):  
Optimal Design ◽  
Gas Turbine ◽  
Gas Turbine Engine ◽  
Turbine Engine ◽  
Engine Components ◽  
And Control ◽  
Optimal Design And Control

Flexible manufacturing in repair of gas turbine engine components

1992 ◽  
Author(s):  
KIRK D ◽  
ANDREW VAVRECK ◽  
ERIC LITTLE ◽  
LESLIE JOHNSON ◽  
BRETT SAYLOR
Keyword(s):  
Gas Turbine ◽  
Flexible Manufacturing ◽  
Gas Turbine Engine ◽  
Turbine Engine ◽  
Engine Components

Life assessment of a high temperature probe designed for performance evaluation and health monitoring of an aero gas turbine engine

2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Benny George ◽  
Nagalingam Muthuveerappan
Keyword(s):  
Performance Evaluation ◽  
Gas Turbine ◽  
Health Monitoring ◽  
Gas Turbine Engine ◽  
Life Assessment ◽  
Exhaust Gas ◽  
Cycle Fatigue ◽  
Creep Life ◽  
Turbine Engine ◽  
Engine Components

AbstractTemperature probes of different designs were widely used in aero gas turbine engines for measurement of air and gas temperatures at various locations starting from inlet of fan to exhaust gas from the nozzle. Exhaust Gas Temperature (EGT) downstream of low pressure turbine is one of the key parameters in performance evaluation and digital engine control. The paper presents a holistic approach towards life assessment of a high temperature probe housing thermocouple sensors designed to measure EGT in an aero gas turbine engine. Stress and vibration analysis were carried out from mechanical integrity point of view and the same was evaluated in rig and on the engine. Application of 500 g load concept to clear the probe design was evolved. The design showed strength margin of more than 20% in terms of stress and vibratory loads. Coffin Manson criteria, Larsen Miller Parameter (LMP) were used to assess the Low Cycle Fatigue (LCF) and creep life while Goodman criteria was used to assess High Cycle Fatigue (HCF) margin. LCF and HCF are fatigue related damage from high frequency vibrations of engine components and from ground-air-ground engine cycles (zero-max-zero) respectively and both are of critical importance for ensuring structural integrity of engine components. The life estimation showed LCF life of more than 4000 mission reference cycles, infinite HCF life and well above 2000 h of creep life. This work had become an integral part of the health monitoring, performance evaluation as well as control system of the aero gas turbine engine.

Life assessment of a high temperature probe designed for performance evaluation and health monitoring of an aero gas turbine engine

2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Benny George ◽  
Nagalingam Muthuveerappan
Keyword(s):  
Performance Evaluation ◽  
Gas Turbine ◽  
Health Monitoring ◽  
Gas Turbine Engine ◽  
Life Assessment ◽  
Exhaust Gas ◽  
Cycle Fatigue ◽  
Creep Life ◽  
Turbine Engine ◽  
Engine Components

Abstract Temperature probes of different designs were widely used in aero gas turbine engines for measurement of air and gas temperatures at various locations starting from inlet of fan to exhaust gas from the nozzle. Exhaust Gas Temperature (EGT) downstream of low pressure turbine is one of the key parameters in performance evaluation and digital engine control. The paper presents a holistic approach towards life assessment of a high temperature probe housing thermocouple sensors designed to measure EGT in an aero gas turbine engine. Stress and vibration analysis were carried out from mechanical integrity point of view and the same was evaluated in rig and on the engine. Application of 500 g load concept to clear the probe design was evolved. The design showed strength margin of more than 20% in terms of stress and vibratory loads. Coffin Manson criteria, Larsen Miller Parameter (LMP) were used to assess the Low Cycle Fatigue (LCF) and creep life while Goodman criteria was used to assess High Cycle Fatigue (HCF) margin. LCF and HCF are fatigue related damage from high frequency vibrations of engine components and from ground-air-ground engine cycles (zero-max-zero) respectively and both are of critical importance for ensuring structural integrity of engine components. The life estimation showed LCF life of more than 4000 mission reference cycles, infinite HCF life and well above 2000 h of creep life. This work had become an integral part of the health monitoring, performance evaluation as well as control system of the aero gas turbine engine.

Diagnosis of Turbine Engine Transient Performance With Model-Based Parameter Estimation Techniques

1994 ◽  
Author(s):  
Jeff W. Bird ◽  
Howard M. Schwartz
Keyword(s):  
Gas Turbine ◽  
Test Data ◽  
Physical Models ◽  
Turbine Engine ◽  
Robustness To Noise ◽  
Linear Effects ◽  
Diagnostic Capabilities ◽  
Engine Components ◽  
And Control ◽  
Parameter Estimation Techniques

This review surveys knowledge needed to develop an improved method of modelling the dynamics of gas turbine performance for fault diagnosis applications. Aerothermodynamic and control models of gas turbine processes are examined as complementary to models derived directly from test data. Extensive, often proprietary data are required for physical models of components, while system identification (SI) methods need data from specially-designed tests. Current methods are limited in: tuning models to test data, non-linear effects, component descriptions in SI models, robustness to noise, and inclusion of control systems and actuators. Conclusions are drawn that SI models could be formulated, with parameters which describe explicitly the functions of key engine components, to offer improved diagnostic capabilities.

LV100 AIPS Technology—For Future Army Propulsion

1992 ◽  
Author(s):  
Walter Brockett ◽  
Angelo Koschier
Keyword(s):  
Control Systems ◽  
Gas Turbine ◽  
Fuel Consumption ◽  
Cooling System ◽  
Gas Turbine Engine ◽  
Air Filtration ◽  
Turbine Engine ◽  
Overall Design ◽  
Armored Vehicle ◽  
And Control

The overall design of and Advanced Integrated Propulsion System (AIPS), powered by an LV100 gas turbine engine, is presented along with major test accomplishments. AIPS was a demonstrator program that included design, fabrication, and test of an advanced rear drive powerpack for application in a future heavy armored vehicle (54.4 tonnes gross weight). The AIPS design achieved significant improvements in volume, performance, fuel consumption, reliability/durability, weight and signature reduction. Major components of AIPS included the recuperated LV100 turbine engine, a hydrokinetic transmission, final drives, self-cleaning air filtration (SCAF), cooling system, signature reduction systems, electrical and hydraulic components, and control systems with diagnostics/prognostics and maintainability features.

An Integrated Approach for Gas Turbine Engine Simulation

2000 ◽  
Author(s):  
Zhiwu Xie ◽  
Ming Su ◽  
Shilie Weng
Keyword(s):  
Gas Turbine ◽  
Local Area Network ◽  
Integrated Approach ◽  
Local Area ◽  
Gas Turbine Engine ◽  
Future Research ◽  
Area Network ◽  
Turbine Engine ◽  
Engine Simulation ◽  
Engine Components

Abstract The static and transient performance of a gas turbine engine is determined by both the characteristics of the engine components and their interactions. This paper presents a generalized simulation framework that enables the integration of different component and system simulation codes. The concept of engine simulation integration and its implementation model is described. The model is designed as an object-oriented system, in which various simulation tasks are assigned to individual software components that interact with each other. A new design rationale called “message-based modeling” and its resulting class structure is presented and analyzed. The object model is implemented within a heterogeneous network environment. To demonstrate its flexibility, the codes that deal with different engine components are separately programmed on different computers running various operating systems. These components communicate with each other via a CORBA compliant ORB, which simulates the overall performance of an engine system. The resulting system has been tested on a Local Area Network (LAN) to simulate the transient response of a three-shaft gas turbine engine, subject to small fuel step perturbations. The simulation results for various network configurations are presented. It is evident that in contrast to a standalone computer simulation, the distributed implementation requires much longer simulation time. This difference of simulation efficiency is analyzed and explained. The limitations of this endeavor, along with some future research topics, are also reported in this paper.

On Gas Turbine Engine and Control System Condition Monitoring

1997 ◽  
Vol 30 (18) ◽  
pp. 67-71 ◽  
Author(s):  
Timofei Breikin ◽  
Valentin Arkov ◽  
Gennady Kulikov ◽  
Visakan Kadirkamanathan ◽  
Vijay Patel
Keyword(s):  
Control System ◽  
Gas Turbine ◽  
Condition Monitoring ◽  
Gas Turbine Engine ◽  
Turbine Engine ◽  
And Control

Ceramic Composites for Gas Turbine Engines via a New Process

1989 ◽  
Author(s):  
G. H. Schiroky ◽  
A. W. Urquhart ◽  
B. W. Sorenson
Keyword(s):  
Gas Turbine ◽  
Joint Venture ◽  
New Technology ◽  
Ceramic Composites ◽  
Gas Turbine Engine ◽  
Molten Metals ◽  
Oxidation Reactions ◽  
Turbine Engine ◽  
New Process ◽  
Engine Components

A new process for ceramic composites involves the growth of ceramic matrices through shaped preforms using directed oxidation reactions of molten metals. The preforms may consist of reinforcing fibers, whiskers, platelets, or particles, as needed to produce the desired properties in the finished component. This new technology is being developed by Lanxide Corporation and is being applied to gas turbine engine components by Du Pont Lanxide Composites Inc., a joint venture. The paper includes a description of the technology and a discussion of the status of its application to materials for gas turbine engine components.

Sign in / Sign up

Export Citation Format

Share Document