Unsteady MHD rear stagnation-point flow over off-centred deformable surfaces

2017 ◽  
Vol 27 (7) ◽  
pp. 1554-1570 ◽  
Author(s):  
Mustafa Turkyilmazoglu ◽  
Kohilavani Naganthran ◽  
Ioan Pop
Keyword(s):  
Differential Equations ◽  
Stagnation Point ◽  
Design Methodology ◽  
Flow Characteristics ◽  
Stagnation Point Flow ◽  
Content Type ◽  
Flow Problems ◽  
Deformable Surfaces ◽  
Practical Implications ◽  
Rear Stagnation Point

Purpose The purpose of this paper is to present both an analytical and a numerical analysis of the unsteady magnetohydrodynamic (MHD) rear stagnation-point flow over off-centred deformable surfaces. Design/methodology/approach The numerical MATLAB solver bvp4c suitable for routine boundary value problem is used for the set of ordinary differential equations reduced from the governing partial differential equations. Findings Multiple solutions are found for particular eigenvalues. The physical solution is computed by the help of a linear stability analysis. The authors have succeeded in discovering the second solutions, and it is suggested that these solutions are unstable and not physically realisable in practice. The current findings add to a growing body of literature on MHD stagnation-point flow problems. It is also found that the governing parameters have different effects on the flow characteristics. Practical implications Even though problems of steady MHD flows have been extensively studied for stagnation-point flows, limited findings can be found on the unsteady MHD rear stagnation-point flow over off-centred deformable surfaces. Originality/value The originality of this work is the application of a magnetic field on a time-dependent MHD rear stagnation-point flow over off-centred deformable surfaces.

Unsteady separated stagnation-point flow and heat transfer past a stretching/shrinking sheet in a copper-water nanofluid

2019 ◽  
Vol 29 (8) ◽  
pp. 2588-2605 ◽  
Author(s):  
Natalia C. Roşca ◽  
Alin V. Roşca ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Partial Differential Equations ◽  
Differential Equations ◽  
Stagnation Point ◽  
Design Methodology ◽  
Similarity Transformation ◽  
Stagnation Point Flow ◽  
Shrinking Sheet ◽  
Content Type ◽  
Flow And Heat Transfer

Purpose The purpose of this paper is to theoretically investigate the unsteady separated stagnation-point flow and heat transfer past an impermeable stretching/shrinking sheet in a copper (Cu)-water nanofluid using the mathematical nanofluid model proposed by Tiwari and Das. Design/methodology/approach A similarity transformation is used to reduce the governing partial differential equations to a set of nonlinear ordinary (similarity) differential equations which are then solved numerically using the function bvp4c from Matlab for different values of the governing parameters. Findings It is found that the solution is unique for stretching case; however, multiple (dual) solutions exist for the shrinking case. Originality/value The authors believe that all numerical results are new and original, and have not been published elsewhere.

A numerical study of the axisymmetric rotational stagnation point flow impinging radially a permeable stretching/shrinking surface in a nanofluid

2017 ◽  
Vol 27 (11) ◽  
pp. 2415-2432 ◽  
Author(s):  
Natalia C. Roşca ◽  
Ioan Pop
Keyword(s):  
Differential Equations ◽  
Stagnation Point ◽  
Design Methodology ◽  
Numerical Study ◽  
Stagnation Point Flow ◽  
Shrinking Sheet ◽  
Content Type ◽  
First Order ◽  
Flow And Heat Transfer ◽  
Shrinking Surface

Purpose The purpose of this study is to analyze numerically the steady axisymmetric rotational stagnation point flow impinging on a radially permeable stretching/shrinking sheet in a nanofluid. Design/methodology/approach Similarity transformation is used to convert the system of partial differential equations into a system of ordinary (similarity) differential equations. This system is then reduced to a system of first-order differential equations and solved numerically using the bvp4c function in MATLAB software. Findings Dual solutions exist when the surface is stretched, as well as when the surface is shrunk. For these solutions, a stability analysis is carried out revealing that the first solution (upper branch) is stable and physically realizable, while the second solution (lower branch) is unstable and therefore not physically realizable. Originality/value The present results are original and new for the study of fluid flow and heat transfer over a stretching/shrinking surface, as they successfully extend the problem considered by Weidman (2016) to the case of nanofluids.

THREE-DIMENSIONAL STAGNATION-POINT FLOW OVER A PERMEABLE STRETCHING/SHRINKING SHEET WITH A SECOND ORDER SLIP FLOW

2021 ◽  
Vol 10 (9) ◽  
pp. 3273-3282
Author(s):  
M.E.H. Hafidzuddin ◽  
R. Nazar ◽  
N.M. Arifin ◽  
I. Pop
Keyword(s):  
Differential Equations ◽  
Stagnation Point ◽  
Flow Model ◽  
Nonlinear Partial Differential Equations ◽  
Slip Flow ◽  
Three Dimensional ◽  
Flow Characteristics ◽  
Second Order ◽  
Stagnation Point Flow ◽  
Shrinking Sheet

The problem of steady laminar three-dimensional stagnation-point flow on a permeable stretching/shrinking sheet with second order slip flow model is studied numerically. Similarity transformation has been used to reduce the governing system of nonlinear partial differential equations into the system of ordinary (similarity) differential equations. The transformed equations are then solved numerically using the \texttt{bvp4c} function in MATLAB. Multiple solutions are found for a certain range of the governing parameters. The effects of the governing parameters on the skin friction coefficients and the velocity profiles are presented and discussed. It is found that the second order slip flow model is necessary to predict the flow characteristics accurately.

Numerical solutions of non-alignment stagnation-point flow and heat transfer over a stretching/shrinking surface in a nanofluid

2016 ◽  
Vol 26 (6) ◽  
pp. 1747-1767 ◽  
Author(s):  
Ioan Pop ◽  
Kohi Naganthran ◽  
Roslinda Nazar
Keyword(s):  
Heat Transfer ◽  
Differential Equations ◽  
Stagnation Point ◽  
Numerical Solutions ◽  
Dual Solutions ◽  
Stagnation Point Flow ◽  
Content Type ◽  
Boundary Layer Equations ◽  
Flow And Heat Transfer ◽  
Shrinking Surface

Purpose – The purpose of this paper is to analyse numerically the steady stagnation-point flow of a viscous and incompressible fluid over continuously non-aligned stretching or shrinking surface in its own plane in a water-based nanofluid which contains three different types of nanoparticles, namely, Cu, Al2O3 and TiO2. Design/methodology/approach – Similarity transformation is used to convert the system of boundary layer equations which are in the form of partial differential equations into a system of ordinary differential equations. The system of similarity governing equations is then reduced to a system of first-order differential equations and solved numerically using the bvp4c function in Matlab software. Findings – Unique solution exists when the surface is stretched and dual solutions exist as the surface shrunk. For the dual solutions, stability analysis has revealed that the first solution (upper branch) is stable and physically realizable, while the second solution (lower branch) is unstable. The effect of non-alignment is huge for the shrinking surface which is in contrast with the stretching surface. Practical implications – The results obtained can be used to explain the characteristics and applications of nanofluids, which are widely used as coolants, lubricants, heat exchangers and micro-channel heat sinks. This problem also applies to some situations such as materials which are manufactured by extrusion, production of glass-fibre and shrinking balloon. In this kind of circumstance, the rate of cooling and the stretching/shrinking process play an important role in moulding the final product according to preferable features. Originality/value – The present results are original and new for the study of fluid flow and heat transfer over a stretching/shrinking surface for the problem considered by Wang (2008) in a viscous fluid and extends to nanofluid by using the Tiwari and Das (2007) model.

scholarly journals MHD stagnation-point flow and heat transfer past a stretching/shrinking sheet in a hybrid nanofluid with induced magnetic field

2019 ◽  
Vol 30 (3) ◽  
pp. 1345-1364 ◽  
Author(s):  
Mohamad Mustaqim Junoh ◽  
Fadzilah Md Ali ◽  
Norihan Md Arifin ◽  
Norfifah Bachok ◽  
Ioan Pop
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Differential Equations ◽  
Stagnation Point ◽  
Nonlinear Partial Differential Equations ◽  
Stagnation Point Flow ◽  
Shrinking Sheet ◽  
Hybrid Nanofluid ◽  
Induced Magnetic Field ◽  
Content Type

Purpose The purpose of this paper is to investigate the steady magnetohydrodynamics (MHD) boundary layer stagnation-point flow of an incompressible, viscous and electrically conducting fluid past a stretching/shrinking sheet with the effect of induced magnetic field. Design/methodology/approach The governing nonlinear partial differential equations are transformed into a system of nonlinear ordinary differential equations via the similarity transformations before they are solved numerically using the “bvp4c” function in MATLAB. Findings It is found that there exist non-unique solutions, namely, dual solutions for a certain range of the stretching/shrinking parameters. The results from the stability analysis showed that the first solution (upper branch) is stable and valid physically, while the second solution (lower branch) is unstable. Practical implications This problem is important in the heat transfer field such as electronic cooling, engine cooling, generator cooling, welding, nuclear system cooling, lubrication, thermal storage, solar heating, cooling and heating in buildings, biomedical, drug reduction, heat pipe, space aircrafts and ships with better efficiency than that of nanofluids applicability. The results obtained are very useful for researchers to determine which solution is physically stable, whereby, mathematically more than one solution exist. Originality/value The present results are new and original for the problem of MHD stagnation-point flow over a stretching/shrinking sheet in a hybrid nanofluid, with the effect of induced magnetic field.

Discrete Verhulst model based on a linear time-varying

2014 ◽  
Vol 4 (2) ◽  
pp. 299-310 ◽  
Author(s):  
Xia Long ◽  
Yong Wei ◽  
Zhao Long
Keyword(s):  
Differential Equations ◽  
Difference Equations ◽  
Design Methodology ◽  
Linear Time ◽  
Original Data ◽  
Time Varying ◽  
Sequential Simulation ◽  
Content Type ◽  
Verhulst Model ◽  
Practical Implications

Purpose – The purpose of this paper is to build a linear time-varying discrete Verhulst model (LTDVM), to realise the convert from continuous forms to discrete forms, and to eliminate traditional grey Verhulst model's error caused by difference equations directly jumping to differential equations. Design/methodology/approach – The methodology of the paper is by the light of discrete thoughts and countdown to the original data sequence. Findings – The research of this model manifests that LTDVM is unbiased on the “s” sequential simulation. Practical implications – The example analysis shows that LTDVM embodies simulation and prediction with high precision. Originality/value – This paper is to realise the convert from continuous forms to discrete forms, and to eliminate traditional grey Verhulst model's error caused by difference equations directly jumping to differential equations. Meanwhile, the research of this model manifests that LTDVM is unbiased on the “s” sequential simulation.

3D stagnation point flow of Maxwell fluid towards an off-centered rotating disk

2016 ◽  
Vol 12 (2) ◽  
pp. 345-361 ◽  
Author(s):  
Najeeb Alam Khan ◽  
Sidra Khan ◽  
Fatima Riaz
Keyword(s):  
Differential Equations ◽  
Stagnation Point ◽  
Perturbation Technique ◽  
Maxwell Fluid ◽  
Rotating Disk ◽  
Deborah Number ◽  
Stagnation Point Flow ◽  
Graphical Form ◽  
Rotational Parameter ◽  
Content Type

Purpose – The purpose of this paper is to study the three dimensional, steady and incompressible flow of non-Newtonian rate type Maxwell fluid, for stagnation point flow toward an off-centered rotating disk. Design/methodology/approach – The governing partial differential equations are transformed to a system of non-linear ordinary differential equations by conventional similarity transformations. The non-perturbation technique, homotopy analysis method (HAM) is employed for the computation of solutions. And, the solution is computed by using the well-known software Mathematica 10. Findings – The effects of rotational parameter and Deborah number on radial, azimuthal and induced velocity functions are investigated. The results are presented in graphical form. The convergence control parameter is also plotted for velocity profiles. The comparison with the previous results is also tabulated. The skin friction coefficients are also computed for different values of Deborah number. Originality/value – This paper studies the effect of rotation and Deborah number on off-centered rotating disk has been observed and presented graphically.

Unsteady MHD Rear Stagnation-Point Flow of a Hybrid Nanofluid with Heat Generation/Absorption Effect

2021 ◽  
Vol 87 (1) ◽  
pp. 41-51
Author(s):  
Nurul Amira Zainal ◽  
Kohilavani Naganthran ◽  
Roslinda Nazar
Keyword(s):  
Heat Transfer ◽  
Differential Equations ◽  
Stagnation Point ◽  
Heat Generation ◽  
Stagnation Point Flow ◽  
Hybrid Nanofluid ◽  
Absorption Effect ◽  
Suction Parameter ◽  
The Impact ◽  
Rear Stagnation Point

The study of unsteady flow is essential in various engineering systems, for instance, the periodic fluid motion and start-up process. Therefore, this numerical study focuses on examining the unsteady magnetohydrodynamics (MHD) rear stagnation-point flow in Al2O3-Cu/H2O hybrid nanofluid past a permeable stretching/shrinking surface with the impact of heat generation/absorption. By choosing a suitable similarity transformation, partial differential equations are transformed into a system of nonlinear ordinary differential equations and solved using the bvp4c function in the MATLAB package. The effects of the solution domain’s operating parameters are analysed, and dual solutions are observable as the sheet shrinks. It is found that the addition of the suction parameter escalates the heat transfer efficiency. Eventually, the existence of the unsteadiness parameter and the heat generation/absorption effect significantly encourage heat transfer deterioration.

Off-centered stagnation point flow of an experimental-based hybrid nanofluid impinging to a spinning disk with low to high non-alignments

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Saeed Dinarvand ◽  
Alireza Mahdavi Nejad
Keyword(s):  
Heat Transfer ◽  
Differential Equations ◽  
Stagnation Point ◽  
Thermophysical Properties ◽  
Transformation Method ◽  
Stagnation Point Flow ◽  
Hybrid Nanofluid ◽  
Content Type ◽  
Flow And Heat Transfer ◽  
Spinning Disk

Purpose The purpose of this study is to model and solve numerically the three-dimensional off-centered stagnation point flow and heat transfer of magnesium oxide–silver/water hybrid nanofluid impinging to a spinning disk. Design/methodology/approach The applied effective thermophysical properties of hybrid nanofluid including thermal conductivity and dynamics viscosity are according to the reported experimental relations that would be expanded by a mass-based algorithm. The single phase formulations coupled with experimental-based hybrid nanofluid model is implemented to derive the governing partial differential equations which are then transferred to a set of dimensionless ordinary differential equations (ODEs) with the use of the similarity transformation method. Afterward, the reduced ODEs are solved numerically by bvp4c function from MATLAB that is a trustworthy and efficient code according to three-stage Lobatto IIIa formula. Findings The effect of spinning parameter and nanoparticles masses (mMgO, mAg) on the hydrodynamics and thermal boundary layers behavior and also the quantities of engineering interest are presented in tabular and graphical forms. The recent work demonstrates that the analysis of flow and heat transfer becomes more complicated when there is a non-alignment between the impinging flow and the disk axes. From computational results demonstrate that, the radial and azimuthal velocities are, respectively, the increasing and decreasing functions of the disk spinning parameter. Further, for the greater values of the spinning parameter, an overshoot of the radial velocity owing to the centrifugal forces of the spinning disk is observed. Besides, the quantities of engineering interest gently enhance with first and second nanoparticle masses, while comparing their absolute values illustrates the fact that the effect of second nanoparticle mass (mAg) is greater. Further, it is inferred that the second nanoparticle’s mass enhancement results in the amplification of the heat transfer; although, the high skin friction and the relevant shear stress should be controlled. Originality/value The combination of experimental thermophysical properties with theoretical modeling of the problem can be the novelty of the present work. It is evident that the experimental relations of effective thermophysical properties can be trustable and flexible in the theoretical/mathematical modeling of hybrid nanofluids flows. Besides, to the best of the authors’ knowledge, no one has ever attempted to study the present problem through a mass-based model for hybrid nanofluid.

Oblique stagnation-point flow of a nanofluid past a shrinking sheet

2016 ◽  
Vol 26 (1) ◽  
pp. 189-213 ◽  
Author(s):  
M M Rahman ◽  
Teodor Grosan ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Brownian Motion ◽  
Differential Equations ◽  
Strain Rate ◽  
Stagnation Point ◽  
Volume Fraction ◽  
Flow Behavior ◽  
Stagnation Point Flow ◽  
Shrinking Sheet ◽  
Content Type

Purpose – The laminar two-dimensional stagnation-point flow and heat transfer of a viscous incompressible nanofluid obliquely impinging on a shrinking surface is formulated as a similarity solution of the Navier-Stokes, energy and concentration equations. The model used for the nanofluid incorporates the effects of Brownian motion and thermophoresis. The effect of the dimensionless strain rate, shrinking parameter, Brownian motion parameter and thermophoresis parameter on the flow, temperature and nanoparticle volume fraction is investigated in details. The paper aims to discuss these issues. Design/methodology/approach – The transformed system of ordinary differential equations was solved using the function bvp4c from Matlab. The relative tolerance was set to 10−10. Findings – It is found that dimensionless strain rate and shrinking parameter causes a shift in the position of the point of zero skin friction along the stretching sheet. Obliquity of the flow toward the surface increases as the strain rate intensifies. The results indicate that dual solutions exist for the opposing flow case. Research limitations/implications – The problem is formulated for an incompressible nanofluid with no chemical reactions, dilute mixture, negligible viscous dissipation and negligible radiative heat transfer assuming nanoparticles and base fluid are locally in thermal equilibrium. Beyond the critical point λ c to obtain further solutions, the full basic partial differential equations have to be solved. Originality/value – The present results are original and new for the oblique stagnation-point flow of a nanofluid past a shrinking sheet. Therefore, this study would be important for the researchers working in the relatively new area of nanofluids in order to become familiar with the flow behavior and properties of such nanofluids.

Sign in / Sign up

Export Citation Format

Share Document