THREE-DIMENSIONAL STAGNATION-POINT FLOW OVER A PERMEABLE STRETCHING/SHRINKING SHEET WITH A SECOND ORDER SLIP FLOW

2021 ◽  
Vol 10 (9) ◽  
pp. 3273-3282
Author(s):  
M.E.H. Hafidzuddin ◽  
R. Nazar ◽  
N.M. Arifin ◽  
I. Pop
Keyword(s):  
Differential Equations ◽  
Stagnation Point ◽  
Flow Model ◽  
Nonlinear Partial Differential Equations ◽  
Slip Flow ◽  
Three Dimensional ◽  
Flow Characteristics ◽  
Second Order ◽  
Stagnation Point Flow ◽  
Shrinking Sheet

The problem of steady laminar three-dimensional stagnation-point flow on a permeable stretching/shrinking sheet with second order slip flow model is studied numerically. Similarity transformation has been used to reduce the governing system of nonlinear partial differential equations into the system of ordinary (similarity) differential equations. The transformed equations are then solved numerically using the \texttt{bvp4c} function in MATLAB. Multiple solutions are found for a certain range of the governing parameters. The effects of the governing parameters on the skin friction coefficients and the velocity profiles are presented and discussed. It is found that the second order slip flow model is necessary to predict the flow characteristics accurately.

scholarly journals MHD stagnation-point flow and heat transfer past a stretching/shrinking sheet in a hybrid nanofluid with induced magnetic field

2019 ◽  
Vol 30 (3) ◽  
pp. 1345-1364 ◽  
Author(s):  
Mohamad Mustaqim Junoh ◽  
Fadzilah Md Ali ◽  
Norihan Md Arifin ◽  
Norfifah Bachok ◽  
Ioan Pop
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Differential Equations ◽  
Stagnation Point ◽  
Nonlinear Partial Differential Equations ◽  
Stagnation Point Flow ◽  
Shrinking Sheet ◽  
Hybrid Nanofluid ◽  
Induced Magnetic Field ◽  
Content Type

Purpose The purpose of this paper is to investigate the steady magnetohydrodynamics (MHD) boundary layer stagnation-point flow of an incompressible, viscous and electrically conducting fluid past a stretching/shrinking sheet with the effect of induced magnetic field. Design/methodology/approach The governing nonlinear partial differential equations are transformed into a system of nonlinear ordinary differential equations via the similarity transformations before they are solved numerically using the “bvp4c” function in MATLAB. Findings It is found that there exist non-unique solutions, namely, dual solutions for a certain range of the stretching/shrinking parameters. The results from the stability analysis showed that the first solution (upper branch) is stable and valid physically, while the second solution (lower branch) is unstable. Practical implications This problem is important in the heat transfer field such as electronic cooling, engine cooling, generator cooling, welding, nuclear system cooling, lubrication, thermal storage, solar heating, cooling and heating in buildings, biomedical, drug reduction, heat pipe, space aircrafts and ships with better efficiency than that of nanofluids applicability. The results obtained are very useful for researchers to determine which solution is physically stable, whereby, mathematically more than one solution exist. Originality/value The present results are new and original for the problem of MHD stagnation-point flow over a stretching/shrinking sheet in a hybrid nanofluid, with the effect of induced magnetic field.

scholarly journals Magnetohydrodynamics Stagnation-Point Flow of a Nanofluid Past a Stretching/Shrinking Sheet with Induced Magnetic Field: A Revised Model

Symmetry ◽  
2019 ◽  
Vol 11 (9) ◽  
pp. 1078 ◽  
Author(s):  
Mohamad Mustaqim Junoh ◽  
Fadzilah Md Ali ◽  
Ioan Pop
Keyword(s):  
Magnetic Field ◽  
Differential Equations ◽  
Stagnation Point ◽  
Nonlinear Partial Differential Equations ◽  
Stagnation Point Flow ◽  
Shrinking Sheet ◽  
Governing Equations ◽  
Induced Magnetic Field ◽  
The Stability ◽  
Stretching Or Shrinking Sheet

The revised Buongiorno’s nanofluid model with the effect of induced magnetic field on steady magnetohydrodynamics (MHD) stagnation-point flow of nanofluid over a stretching or shrinking sheet is investigated. The effects of zero mass flux and suction are taken into account. A similarity transformation with symmetry variables are introduced in order to alter from the governing nonlinear partial differential equations into a nonlinear ordinary differential equations. These governing equations are numerically solved using the bvp4c function in Matlab solver, a very adequate finite difference method. The influences of considered parameters ( P r , M, χ , L e , N b , N t , S, and λ ) on velocity, induced magnetic, temperature, and concentration profiles together with the reduced skin friction and heat transfer rate are discussed. Results from these criterion exposed the existence of dual solutions when magnetic field and suction are applied for a specific range of λ . The stability of the solutions obtained is carried out by performing a stability analysis.

THREE-DIMENSIONAL STAGNATION-POINT FLOW OVER AN UNSTEADY PERMEABLE SHRINKING SURFACE

2021 ◽  
Vol 10 (9) ◽  
pp. 3263-3272
Author(s):  
M.E.H. Hafidzuddin ◽  
R. Nazar ◽  
N.M. Arifin ◽  
I. Pop
Keyword(s):  
Differential Equations ◽  
Viscous Flow ◽  
Stagnation Point ◽  
Multiple Solutions ◽  
Similarity Transformation ◽  
Nonlinear Partial Differential Equations ◽  
Three Dimensional ◽  
Shrinking Sheet ◽  
Governing System ◽  
Shrinking Surface

An analysis is carried out to theoretically investigate the unsteady three dimensional stagnation-point of a viscous flow over a permeable stretching/shrinking sheet. A similarity transformation is used to reduce the governing system of nonlinear partial differential equations to a set of nonlinear ordinary (similarity) differential equations, which are then solved numerically using the \texttt{bvp4c} function in MATLAB. Results show that multiple solutions exist for a certain range of unsteadiness and stretching/shrinking parameters. The effects of the governing parameters on the skin friction coefficients and the velocity profiles are presented and discussed.

Stagnation point flow of a nanofluid past a non-aligned stretching/shrinking sheet with a second-order slip velocity

2019 ◽  
Vol 29 (2) ◽  
pp. 738-762 ◽  
Author(s):  
Alin V. Roşca ◽  
Natalia C. Roşca ◽  
Ioan Pop
Keyword(s):  
Differential Equations ◽  
Stagnation Point ◽  
Slip Velocity ◽  
Lewis Number ◽  
Second Order ◽  
Stagnation Point Flow ◽  
Shrinking Sheet ◽  
Content Type ◽  
Flow And Heat Transfer ◽  
Shrinking Surface

Purpose The purpose of this study is to investigate the influence of the second order slip velocity on the boundary layer stagnation point flow of a nanofluid past a non-aligned stretching/shrinking sheet. Design/methodology/approach Proper similarity variables are used to transform the system of partial differential equations into a system of ordinary (similarity) differential equations. This system is then solved numerically using the bvp4c solver in MATLAB software. As in the papers by Kuznetsov and Nield (2010, 2013) and Fang et al. (2009), the authors considered the stretching/shrinking parameter λ, the first-order (a1, a2) and second-order (b1) slip parameters and the Lewis number Le, Nb the Brownian parameter and Nt the thermophoresis parameter fixed at Le = 10, Nb = Nt = 0.5 when the Prandtl number Pr is fixed at Pr = 1. Findings Dual solutions are found as the sheet is shrunk in the horizontal direction. Stability analysis shows that the first solution is physically realizable, whereas the second solution is not practicable. Originality/value The present results are original and new for the study of fluid flow and heat transfer over a stretching/shrinking surface, as they successfully extend the problem considered by Wang (2008) and Lok et al. (2011) to the case of nanofluids.

Three dimensional MHD stagnation point flow of Al-Cu alloy suspended water based nanofluid with second order slip and convective heating

2017 ◽  
Vol 27 (12) ◽  
pp. 2879-2901
Author(s):  
N. Nithyadevi ◽  
P. Gayathri ◽  
A. Chamkha
Keyword(s):  
Magnetic Field ◽  
Differential Equations ◽  
Stagnation Point ◽  
Three Dimensional ◽  
Second Order ◽  
Stagnation Point Flow ◽  
Convective Heating ◽  
Slip Effect ◽  
Content Type ◽  
Water Based

Purpose The paper aims to examine the boundary layers of a three-dimensional stagnation point flow of Al-Cu nanoparticle-suspended water-based nanofluid in an electrically conducting medium. The effect of magnetic field on second-order slip effect and convective heating is also taken into account. Design/methodology/approach The thermophysical properties of alloy nanoparticles such as density, specific heat capacity and thermal conductivity are computed using appropriate formula. The non-linear parabolic partial differential equations are transformed to ordinary differential equations and solved by shooting technique. Findings The influence of compositional variation of alloy nanoparticle, nanoparticle concentration, magnetic effect, slip parameters and Biot number are presented for various flow characteristics. Interesting results on skin friction and Nusselt number are obtained for different composition of aluminium and copper. Originality/value A novel result of the analysis reveals that impact of magnetic field near the boundary is suppressed by the slip effect.

scholarly journals Multiple Solutions for Stagnation-Point Flow of Unsteady Carreau Fluid along a Permeable Stretching/Shrinking Sheet with Non-Uniform Heat Generation

Coatings ◽  
2021 ◽  
Vol 11 (9) ◽  
pp. 1012
Author(s):  
Dezhi Yang ◽  
Muhammad Israr Ur Rehman ◽  
Aamir Hamid ◽  
Saif Ullah
Keyword(s):  
Nusselt Number ◽  
Differential Equations ◽  
Stagnation Point ◽  
Local Nusselt Number ◽  
Nonlinear Partial Differential Equations ◽  
Stagnation Point Flow ◽  
Shrinking Sheet ◽  
Carreau Fluid ◽  
Similarity Relations ◽  
Uniform Heat

The aim of the present study was to explore the effect of a non-uniform heat source/sink on the unsteady stagnation point flow of Carreau fluid past a permeable stretching/shrinking sheet. The novelty of the flow model was enhanced with additional effects of magnetohydrodynamics, joule heating, and viscous dissipation. The nonlinear partial differential equations were converted into ordinary differential equations with the assistance of appropriate similarity relations and were then tackled by employing the Runge-Kutta-Fehlberg technique with the shooting method. The impacts of pertinent parameters on the dimensionless velocity and temperature profiles along with the friction factor and local Nusselt number were extensively discussed by means of graphical depictions and tables. The current results were compared to the previous findings under certain conditions to determine the precision and validity of the present study. The fluid flow velocity of Carreau fluid increased with the value of the magnetic parameter in the case of the first solution, and the opposite behavior was noticed for the second solution. It was seen that temperature of the Carreau fluid expanded with the higher values of unsteadiness and magnetic parameters. It was visualized from multiple branches that the local Nusselt number declined with the Eckert number parameter for both the upper and lower branch.

Unsteady separated stagnation-point flow and heat transfer past a stretching/shrinking sheet in a copper-water nanofluid

2019 ◽  
Vol 29 (8) ◽  
pp. 2588-2605 ◽  
Author(s):  
Natalia C. Roşca ◽  
Alin V. Roşca ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Partial Differential Equations ◽  
Differential Equations ◽  
Stagnation Point ◽  
Design Methodology ◽  
Similarity Transformation ◽  
Stagnation Point Flow ◽  
Shrinking Sheet ◽  
Content Type ◽  
Flow And Heat Transfer

Purpose The purpose of this paper is to theoretically investigate the unsteady separated stagnation-point flow and heat transfer past an impermeable stretching/shrinking sheet in a copper (Cu)-water nanofluid using the mathematical nanofluid model proposed by Tiwari and Das. Design/methodology/approach A similarity transformation is used to reduce the governing partial differential equations to a set of nonlinear ordinary (similarity) differential equations which are then solved numerically using the function bvp4c from Matlab for different values of the governing parameters. Findings It is found that the solution is unique for stretching case; however, multiple (dual) solutions exist for the shrinking case. Originality/value The authors believe that all numerical results are new and original, and have not been published elsewhere.

Effects of Second-Order Slip and Magnetic Field on Mixed Convection Stagnation-Point Flow of a Maxwellian Fluid: Multiple Solutions

2016 ◽  
Vol 138 (12) ◽  
Author(s):  
M. M. Rahman
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Mixed Convection ◽  
Stagnation Point ◽  
Reverse Flow ◽  
Second Order ◽  
Dual Solutions ◽  
Stagnation Point Flow ◽  
Shrinking Sheet ◽  
Variable Surface

In this paper, we investigate the effects of second-order slip and magnetic field on the nonlinear mixed convection stagnation-point flow toward a vertical permeable stretching/shrinking sheet in an upper convected Maxwell (UCM) fluid with variable surface temperature. Numerical results are obtained using the bvp4c function from matlab for the reduced skin-friction coefficient, the rate of heat transfer, the velocity, and the temperature profiles. The results indicate that multiple (dual) solutions exist for a buoyancy opposing flow for certain values of the parameter space irrespective to the types of surfaces whether it is stretched or shrinked. It is found that an applied magnetic field compensates the suction velocity for the existence of the dual solutions. Depending on the parametric conditions; elastic parameter, magnetic field parameter, first- and second-order slip parameters significantly controls the flow and heat transfer characteristics. The illustrated streamlines show that for upper branch solutions, the effects of stretching and suction are direct and obvious as the flow near the surface is seen to suck through the permeable sheet and drag away from the origin of the sheet. However, aligned but reverse flow occurs for the case of lower branch solutions when the mixed convection effect is less significant.

scholarly journals Unsteady Three-Dimensional MHD Non-Axisymmetric Homann Stagnation Point Flow of a Hybrid Nanofluid with Stability Analysis

Mathematics ◽  
2020 ◽  
Vol 8 (5) ◽  
pp. 784 ◽  
Author(s):  
Nurul Amira Zainal ◽  
Roslinda Nazar ◽  
Kohilavani Naganthran ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Mathematical Model ◽  
Stability Analysis ◽  
Differential Equations ◽  
Stagnation Point ◽  
Three Dimensional ◽  
Industrial Sector ◽  
Dual Solutions ◽  
Stagnation Point Flow ◽  
Hybrid Nanofluid

The hybrid nanofluid under the influence of magnetohydrodynamics (MHD) is a new interest in the industrial sector due to its applications, such as in solar water heating and scraped surface heat exchangers. Thus, the present study accentuates the analysis of an unsteady three-dimensional MHD non-axisymmetric Homann stagnation point flow of a hybrid Al2O3-Cu/H2O nanofluid with stability analysis. By employing suitable similarity transformations, the governing mathematical model in the form of the partial differential equations are simplified into a system of ordinary differential equations. The simplified mathematical model is then solved numerically by the Matlab solver bvp4c function. This solving approach was proficient in generating more than one solution when good initial guesses were provided. The numerical results presented significant influences on the rate of heat transfer and fluid flow characteristics of a hybrid nanofluid. The rate of heat transfer and the trend of the skin friction coefficient improve with the increment of the nanoparticles’ concentration and the magnetic parameter; however, they deteriorate when the unsteadiness parameter increases. In contrast, the ratio of the escalation of the ambient fluid strain rate to the plate was able to adjourn the boundary layer separation. The dual solutions (first and second solutions) are obtainable when the surface of the sheet shrunk. A stability analysis is carried out to justify the stability of the dual solutions, and hence the first solution is seen as physically reliable and stable, while the second solution is unstable.

scholarly journals Stagnation-point flow past a shrinking sheet in a nanofluid

Open Physics ◽  
2011 ◽  
Vol 9 (5) ◽  
Author(s):  
Roslinda Nazar ◽  
Mihaela Jaradat ◽  
Norihan Arifin ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Friction Coefficient ◽  
Nonlinear System ◽  
Differential Equations ◽  
Skin Friction ◽  
Stagnation Point ◽  
Volume Fraction ◽  
Skin Friction Coefficient ◽  
Stagnation Point Flow ◽  
Shrinking Sheet

AbstractIn this paper, the stagnation-point flow and heat transfer towards a shrinking sheet in a nanofluid is considered. The nonlinear system of coupled partial differential equations was transformed and reduced to a nonlinear system of coupled ordinary differential equations, which was solved numerically using the shooting method. Numerical results were obtained for the skin friction coefficient, the local Nusselt number as well as the velocity and temperature profiles for some values of the governing parameters, namely the nanoparticle volume fraction φ, the shrinking parameter λand the Prandtl number Pr. Three different types of nanoparticles are considered, namely Cu, Al2O3 and TiO2. It was found that nanoparticles of low thermal conductivity, TiO2, have better enhancement on heat transfer compared to nanoparticles Al2O3 and Cu. For a particular nanoparticle, increasing the volume fraction φ results in an increase of the skin friction coefficient and the heat transfer rate at the surface. It is also found that solutions do not exist for larger shrinking rates and dual solutions exist when λ < −1.0.

Sign in / Sign up

Export Citation Format

Share Document