Hybrid nanofluid flow and heat transfer over a permeable biaxial stretching/shrinking sheet

2019 ◽  
Vol 30 (7) ◽  
pp. 3497-3513 ◽  
Author(s):  
Iskandar Waini ◽  
Anuar Ishak ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
Dual Solutions ◽  
Shrinking Sheet ◽  
Hybrid Nanofluid ◽  
Content Type ◽  
Volume Fractions ◽  
Biaxial Stretching ◽  
Flow And Heat Transfer

Purpose The purpose of this paper is to examine the axisymmetric flow and heat transfer of a hybrid nanofluid over a permeable biaxial stretching/shrinking sheet. Design/methodology/approach In this study, 0.1 solid volume fraction of alumina (Al2O3) is fixed, then consequently, various solid volume fractions of copper (Cu) are added into the mixture with water as the base fluid to form Cu-Al2O3/water hybrid nanofluid. The hybrid nanofluid equations are converted to the similarity equations by using the similarity transformation. The bvp4c solver, which is available in the Matlab software is used for solving the similarity equations numerically. The numerical results for selected values of the parameters are presented in tabular and graphical forms, and are discussed in detail. Findings It is found that dual solutions exist up to a certain value of the stretching/shrinking and suction parameters. The critical value λc < 0 for the existence of the dual solutions decreases as nanoparticle volume fractions for copper increase. The temporal stability analysis is performed to analyze the stability of the dual solutions, and it is revealed that only one of them is stable and physically reliable. Originality/value The present problem is new, original with many important results for practical problems in the modern industry.

Fluid flow and heat transfer of a stratified system during natural convection – influence of chamfered corners

2019 ◽  
Vol 29 (2) ◽  
pp. 470-486 ◽  
Author(s):  
Alireza Rahimi ◽  
Aravindhan Surendar ◽  
Aygul Z. Ibatova ◽  
Abbas Kasaeipoor ◽  
Emad Hasani Malekshah
Keyword(s):  
Heat Transfer ◽  
Fluid Flow ◽  
Natural Convection ◽  
Entropy Generation ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
Three Dimensional ◽  
Immiscible Fluids ◽  
Content Type ◽  
Flow And Heat Transfer

Purpose This paper aims to investigate the three-dimensional natural convection and entropy generation in the rectangular cuboid cavities included by chamfered triangular partition made by polypropylene. Design/methodology/approach The enclosure is filled by multi-walled carbon nanotubes (MWCNTs)-H2O nanofluid and air as two immiscible fluids. The finite volume approach is used for computation. The fluid flow and heat transfer are considered with combination of local entropy generation due to fluid friction and heat transfer. Moreover, a numerical method is developed based on three-dimensional solution of Navier–Stokes equations. Findings Effects of side ratio of triangular partitions (SR = 0.5, 1 and 2), Rayleigh number (103 < Ra < 105) and solid volume fraction (f = 0.002, 0.004 and 0.01 Vol.%) of nanofluid are investigated on both natural convection characteristic and volumetric entropy generation. The results show that the partitions can be a suitable method to control fluid flow and energy consumption, and three-dimensional solutions renders more accurate results. Originality/value The originality of this work is to study the three-dimensional natural convection and entropy generation of a stratified system.

Hybrid nanofluid flow and heat transfer past a vertical thin needle with prescribed surface heat flux

2019 ◽  
Vol 29 (12) ◽  
pp. 4875-4894 ◽  
Author(s):  
Iskandar Waini ◽  
Anuar Ishak ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Surface Heat Flux ◽  
Surface Heat ◽  
Dual Solutions ◽  
Hybrid Nanofluid ◽  
Nanofluid Flow ◽  
Needle Size ◽  
Content Type ◽  
Flow And Heat Transfer

Purpose The purpose of this paper is to study the steady mixed convection hybrid nanofluid flow and heat transfer past a vertical thin needle with prescribed surface heat flux. Design/methodology/approach The governing partial differential equations are transformed into a set of ordinary differential equations by using a similarity transformation. The transformed equations are then solved numerically using the boundary value problem solver (bvp4c) in Matlab software. The features of the skin friction coefficient and the local Nusselt number as well as the velocity and temperature profiles for different values of the governing parameters are analyzed and discussed. Findings It is found that dual solutions exist for a certain range of the mixed convection parameter where its critical values decrease with the increasing of the copper (Cu) nanoparticle volume fractions and for the smaller needle size. It is also observed that the increasing of the copper (Cu) nanoparticle volume fractions and the decreasing of the needle size tend to enhance the skin friction coefficient and the local Nusselt number on the needle surface. A temporal stability analysis is performed to determine the stability of the dual solutions in the long run, and it is revealed that only one of them is stable, while the other is unstable. Originality/value The problem of hybrid nanofluid flow and heat transfer past a vertical thin needle with prescribed surface heat flux is the important originality of the present study where the dual solutions for the opposing flow are obtained.

Cross flow and heat transfer past a permeable stretching/shrinking sheet in a hybrid nanofluid

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Natalia C. Roşca ◽  
Alin V. Roşca ◽  
Amin Jafarimoghaddam ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Differential Equations ◽  
Cross Flow ◽  
Porous Wall ◽  
Shrinking Sheet ◽  
Hybrid Nanofluid ◽  
Lower Branch ◽  
Content Type ◽  
Flow And Heat Transfer ◽  
Branch Solution

Purpose The purpose of this paper is to study the laminar boundary layer cross flow and heat transfer on a rotational stagnation-point flow over either a stretching or shrinking porous wall submerged in hybrid nanofluids. The involved boundary layers are of stream-wise type with stretching/shrinking process along the surface. Design/methodology/approach Using appropriate similarity variables the partial differential equations are reduced to ordinary (similarity) differential equations. The reduced system of equations is solved analytically (by high-order perturbed field propagation for small to moderate stretching/shrinking parameter and low-order perturbation for large stretching/shrinking parameter) and numerically using the function bvp4c from MATLAB for different values of the governing parameters. Findings It was found that the basic similarity equations admit dual (upper and lower branch) solutions for both stretching/shrinking surfaces. Moreover, performing a linear stability analysis, it was confirmed that the upper branch solution is realistic (physically realizable), while the lower branch solution is not physically realizable in practice. These dual solutions will be studied in the present paper. Originality/value The authors believe that all numerical results are new and original and have not been published before for the present problem.

Mixed convection boundary layer flow along vertical thin needles in nanofluids

2014 ◽  
Vol 24 (3) ◽  
pp. 579-594 ◽  
Author(s):  
Radu Trimbitas ◽  
Teodor Grosan ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
Convection Boundary Layer ◽  
Heat Transfer Characteristics ◽  
Content Type ◽  
Flow And Heat Transfer ◽  
Convection Boundary ◽  
Layer Flow

Purpose – The purpose of this paper is to theoretically study the problem of mixed convection boundary layer flow and heat transfer past a vertical needle with variable wall temperature using nanofluids. The similarity equations are solved numerically for copper nanoparticles in the based fluid of water to investigate the effect of the solid volume fraction parameter of the fluid and heat transfer characteristics. The skin friction coefficient, Nusselt number, and the velocity and temperature profiles and are graphically presented and discussed. Design/methodology/approach – The transformed system of ordinary differential equations was solved using the function bvp4c from Matlab. The relative tolerance was set to 1e-10. For the study of the stability the authors also used the bvp4c function in combination with chebfun package from Matlab. Findings – It is found that the solid volume fraction affects the fluid flow and heat transfer characteristics. The numerical results for a regular fluid and forced convection flow are compared with the corresponding results reported by Chen and Smith. The solutions exists up to a critical value of λ, beyond which the boundary layer separates from the surface and the solution based upon the boundary-layer approximations is not possible Originality/value – The paper describes how multiple (dual) solutions for the flow reversals are obtained. A stability analysis for this flow reversal has been also done showing that the lower solution branches are unstable, while the upper solution branches are stable.

scholarly journals Influence of a Darcy-Forchheimer porous medium on the flow of a radiative magnetized rotating hybrid nanofluid over a shrinking surface

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Sumera Dero ◽  
Hisamuddin Shaikh ◽  
Ghulam Hyder Talpur ◽  
Ilyas Khan ◽  
Sayer O. Alharbim ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Stability Analysis ◽  
Differential Equations ◽  
Shooting Method ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
Dual Solutions ◽  
Hybrid Nanofluid ◽  
Solution Stability ◽  
Shrinking Surface

AbstractIn this paper, the heat transfer properties in the three-dimensional (3D) magnetized with the Darcy-Forchheimer flow over a shrinking surface of the $$Cu + Al_{2} O_{3} /$$ C u + A l 2 O 3 / water hybrid nanofluid with radiation effect were studied. Valid linear similarity variables convert the partial differential equations (PDEs) into the ordinary differential equations (ODEs). With the help of the shootlib function in the Maple software, the generalized model in the form of ODEs is numerically solved by the shooting method. Shooting method can produce non-unique solutions when correct initial assumptions are suggested. The findings are found to have two solutions, thereby contributing to the introduction of a stability analysis that validates the attainability of first solution. Stability analysis is performed by employing if bvp4c method in MATLAB software. The results show limitless values of dual solutions at many calculated parameters allowing the turning points and essential values to not exist. Results reveal that the presence of dual solutions relies on the values of the porosity, coefficient of inertia, magnetic, and suction parameters for the specific values of the other applied parameters. Moreover, it has been noted that dual solutions exist in the ranges of $$F_{s} \le F_{sc}$$ F s ≤ F sc , $$M \ge M_{C}$$ M ≥ M C ,$$S \ge S_{C} ,$$ S ≥ S C , and $$K_{C} \le K$$ K C ≤ K whereas no solution exists in the ranges of $$F_{s} > F_{sc}$$ F s > F sc , $$M < M_{c}$$ M < M c , $$S < S_{c}$$ S < S c , and $$K_{C} > K$$ K C > K . Further, a reduction in the rate of heat transfer is noticed with a rise in the parameter of the copper solid volume fraction.

Flow and heat transfer over a permeable moving wedge in a hybrid nanofluid with activation energy and binary chemical reaction

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Nurul Amira Zainal ◽  
Roslinda Nazar ◽  
Kohilavani Naganthran ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Activation Energy ◽  
Mass Transfer ◽  
Chemical Reaction ◽  
Volume Fraction ◽  
Hybrid Nanofluid ◽  
Content Type ◽  
Transfer Rates ◽  
Flow And Heat Transfer ◽  
Moving Wedge

Purpose The analysis of boundary layers is needed to reflect the behaviour of fluid flows in current industrial processes and to improve the efficacy of products. Hence, this study aims to analyse the flow and heat transfer performance of hybrid alumina-copper/water (Al2O3-Cu/H2O) nanofluid with the inclusion of activation energy and binary chemical reaction effect towards a moving wedge. Design/methodology/approach The multivariable differential equations with partial derivatives are converted into a specific type of ordinary differential equations by using valid similarity transformations. The reduced mathematical model is elucidated in the MATLAB system by using the bvp4c procedure. This solution method is competent in delivering multiple solutions once appropriate assumptions are supplied. Findings The results of multiple control parameters have been studied, and the findings are verified to provide more than one solution. The coefficient of skin friction was discovered to be increased by adding nanoparticles volume fraction from 0% to 0.5% and 1%, by almost 1.6% and 3.2%. Besides, increasing the nanoparticles volume fraction improves heat transfer efficiency gradually. The inclusion of the activation energy factor displays a downward trend in the mass transfer rates, consequently reducing the concentration profile. In contrast, the increment of the binary reaction rate greatly facilitates the augmentation of mass transfer rates. There is a significant enhancement in the heat transfer rate, approximately 13.2%, when the suction effect dominates about 10% in the boundary layer flow. Additionally, the results revealed that as the activation energy rises, the temperature and concentration profiles rise as well. It is proved that the activation energy parameter boosts the concentration of chemical species in the boundary layer. A similar pattern emerges as the wedge angle parameter increases. The current effort aims to improve the thermal analysis process, particularly in real-world applications such as geothermal reservoirs, chemical engineering and food processing, which often encountered mass transfer phenomenon followed by chemical reactions with activation energy. Originality/value The present results are original and new for the study of flow and heat transfer over a permeable moving wedge in a hybrid nanofluid with activation energy and binary chemical reaction.

MHD hybrid nanofluid flow over a permeable stretching/shrinking sheet with thermal radiation effect

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Ubaidullah Yashkun ◽  
Khairy Zaimi ◽  
Nor Ashikin Abu Bakar ◽  
Anuar Ishak ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Friction Coefficient ◽  
Thermal Radiation ◽  
Radiation Effects ◽  
Skin Friction Coefficient ◽  
Shrinking Sheet ◽  
Hybrid Nanofluid ◽  
Content Type ◽  
Flow And Heat Transfer

Purpose This study aims to investigate the heat transfer characteristic of the magnetohydrodynamic (MHD) hybrid nanofluid over the linear stretching and shrinking surface in the presence of suction and thermal radiation effects. Design/methodology/approach Mathematical equations are transformed into pairs of self-similarity equations using similarity transformation. Boundary value problem solver (bvp4c) in MATLAB was adopted to solve the system of reduced similarity equations. In this study, the authors particularly examine the flow and heat transfer properties for different values of suction and thermal radiation parameters using single-phase nanofluid model. A comparison of the present results shows a good agreement with the published results. Findings It is noticed that the efficiency of heat transfer of hybrid nanofluid (Cu-Al2O3/H2O) is greater than the nanofluid (Cu/H2O). Furthermore, it is also found that dual solutions exist for a specific range of the stretching/shrinking parameter with different values of suction and radiation parameters. The results indicate that the skin friction coefficient and the local Nusselt number increase with suction effect. The values of the skin friction coefficient increases, but the local Nusselt number decreases for the first solution with the increasing of thermal radiation parameter. It is also observed that suction and thermal radiation widen the range of the stretching/shrinking parameter for which the solution exists. Practical implications In practice, the investigation on the flow and heat transfer of MHD hybrid nanofluid through a stretching/shrinking sheet with suction and thermal radiation effects is very important and useful. The problems related to hybrid nanofluid has numerous real-life and industrial applications, for example microfluidics, manufacturing, transportation, military and biomedical, etc. Originality/value In specific, this study focused on increasing thermal conductivity using a hybrid nanofluid mathematical model. This paper is able to obtain the dual solutions. To the best of author’s knowledge, this study is new and there is no previous published work similar to present study.

Hybrid nanofluid flow through an exponentially stretching/shrinking sheet with mixed convection and Joule heating

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Ubaidullah Yashkun ◽  
Khairy Zaimi ◽  
Anuar Ishak ◽  
Ioan Pop ◽  
Rabeb Sidaoui
Keyword(s):  
Heat Transfer ◽  
Mixed Convection ◽  
Joule Heating ◽  
Volume Fraction ◽  
Skin Friction Coefficient ◽  
Eckert Number ◽  
Shrinking Sheet ◽  
Hybrid Nanofluid ◽  
Content Type ◽  
Exponentially Stretching

Purpose This study aims to investigate the flow and heat transfer of a hybrid nanofluid through an exponentially stretching/shrinking sheet along with mixed convection and Joule heating. The nanoparticles alumina (Al2O3) and copper (Cu) are suspended into a base fluid (water) to form a new kind of hybrid nanofluid (Al2O3-Cu/water). Also, the effects of constant mixed convection parameter and Joule heating are considered. Design/methodology/approach The governing partial differential equations are transformed into ordinary differential equations (ODEs) using appropriate similarity transformations. The transformed nonlinear ODEs are solves using the bvp4c solver available in MATLAB software. A comparison of the present results shows a good agreement with the published results. Findings Dual solutions for hybrid nanofluid flow obtained for a specific range of the stretching/shrinking parameter values. The values of the skin friction coefficient increases but the local Nusselt number decreases for the first solution with the increasing of the magnetic parameter. Enhancing copper volume fraction and Eckert number reduces the surface temperature, which intimates the decrement of heat transfer rate for the first and second solutions for the stretching/shrinking sheet. In detail, the first solution results show that when the Eckert number increases as 0.1, 0.4 and 0.7 at λ = 1.5, the temperature variations reduced to 10.686840, 10.671419 and 10.655996. While in the second solution, keeping the same parameters temperature variation reduced to 9.750777, 9.557349 and 9.364489, respectively. On the other hand, the results indicate that the skin friction coefficient increases with copper volume fraction. This study shows that the thermal boundary layer thickness rises due to the rise in the solid volume fraction. It is also observed that the magnetic parameter, copper volume fraction and Eckert number widen the range of the stretching/shrinking parameter for which the solution exists. Practical implications In practice, the investigation on the flow and heat transfer of a hybrid nanofluid past an exponentially stretching/shrinking sheet with mixed convection and Joule heating is crucial and useful. The problems related to hybrid nanofluid have numerous real-life and industrial applications, such as microelectronics, manufacturing, naval structures, nuclear system cooling, biomedical and drug reduction. Originality/value In specific, this study focuses on increasing thermal conductivity using a hybrid nanofluid mathematical model. The novelty of this study is the use of natural mixed convection and Joule heating in a hybrid nanofluid. This paper can obtain dual solutions. The authors declare that this study is new, and there is no previous published work similar to the present study.

scholarly journals Dual Solutions and Stability Analysis of a Hybrid Nanofluid over a Stretching/Shrinking Sheet Executing MHD Flow

Symmetry ◽  
2020 ◽  
Vol 12 (2) ◽  
pp. 276 ◽  
Author(s):  
Liaquat Ali Lund ◽  
Zurni Omar ◽  
Ilyas Khan ◽  
El-Sayed M. Sherif
Keyword(s):  
Stability Analysis ◽  
Differential Equations ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
Temporal Stability ◽  
Mhd Flow ◽  
Numerical Results ◽  
Dual Solutions ◽  
Shrinking Sheet ◽  
Hybrid Nanofluid

In this paper, the unsteady magnetohydrodynamic (MHD) flow of hybrid nanofluid (HNF) composed of C u − A l 2 O 3 /water in the presence of a thermal radiation effect over the stretching/shrinking sheet is investigated. Using similarity transformation, the governing partial differential equations (PDEs) are transformed into a system of ordinary differential equations (ODEs), which are then solved by using a shooting method. In order to validate the obtained numerical results, the comparison of the results with the published literature is made numerically as well as graphically and is found in good agreements. In addition, the effects of many emerging physical governing parameters on the profiles of velocity, temperature, skin friction coefficient, and heat transfer rate are demonstrated graphically and are elucidated theoretically. Based on the numerical results, dual solutions exist in a specific range of magnetic, suction, and unsteadiness parameters. It was also found that the values of f ″ ( 0 ) rise in the first solution and reduce in the second solution when the solid volume fraction ϕ C u is increased. Finally, the temporal stability analysis of the solutions is conducted, and it is concluded that only the first solution is stable.

MHD flow and heat transfer over a permeable stretching/shrinking sheet in a hybrid nanofluid with a convective boundary condition

2019 ◽  
Vol 29 (9) ◽  
pp. 3012-3038 ◽  
Author(s):  
Emad H. Aly ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Differential Equations ◽  
Numerical Solutions ◽  
Mhd Flow ◽  
Convective Boundary Condition ◽  
Shrinking Sheet ◽  
Hybrid Nanofluid ◽  
Convective Boundary ◽  
Content Type ◽  
Flow And Heat Transfer

Purpose The purpose of this study is to present both effective analytic and numerical solutions to MHD flow and heat transfer past a permeable stretching/shrinking sheet in a hybrid nanofluid with suction/injection and convective boundary conditions. Water (base fluid) nanoparticles of alumina and copper were considered as a hybrid nanofluid. Design/methodology/approach Proper-similarity variables were applied to transform the system of partial differential equations into a system of ordinary (similarity) differential equations. Exact analytical solutions were then presented for the dimensionless stream and temperature functions. Further, the authors introduce a very nice analytic and numerical solutions for both small and large values of the magnetic parameter. Findings It was found that no/unique/two equal/dual physical solutions exist for the investigated boundary value problem. The physically realizable practice of these solutions depends on the range of the governing parameters. For a stretching/shrinking sheet, it was deduced that a hybrid nanofluid works as a cooler on increasing some of the investigated parameters. Moreover, in the case of a shrinking sheet, the first solutions of hybrid nanofluid are stable and physically realizable rather than the nanofluid, while those of the second solutions are not for both hybrid nanofluid and nanofluid. Originality/value The present results for the hybrid nanofluids are new and original, as they successfully extend (generalize) the problems previously considered by different authors for the case of nanofluids.

Sign in / Sign up

Export Citation Format

Share Document