Unsteady CHT analysis of a solid state, sensible heat storage for PHES system

2019 ◽  
Vol 30 (6) ◽  
pp. 3199-3209 ◽  
Author(s):  
Bartosz Ziegler ◽  
Jędrzej Mosiężny ◽  
Paweł Czyżewski
Keyword(s):  
Heat Transfer ◽  
Energy Storage ◽  
Solid State ◽  
Conjugate Heat Transfer ◽  
Heat Storage ◽  
Sensible Heat ◽  
System Efficiency ◽  
Exergetic Efficiency ◽  
Key Factors ◽  
Content Type

Purpose The aim of this study is to identify key factors limiting efficiency of pumped heat energy storage systems and determine some general features of transient behavior of solid state, sensible heat storages. Moreover, it aimed at establishing a feasible approach to transient conjugate heat transfer (CHT) analyses for such applications. Design/methodology/approach A zero-dimensional analytical model is used to determine the system efficiency sensitivity to efficiency of its components. Analysis of argon gas flow in an exemplary configuration of layered bed thermal energy storage is presented. The analysis incorporates a unsteady reynolds averaged navier stokes model with conjugate heat transfer between gas and solid storage core. Findings It is established that exergetic efficiency of the heat storage is one of the key factors for the system’s overall performance. Three full cycles of storage charging and discharging having 17 h physical time in total are simulated, with calculation of exergetic efficiency for each of the cycles. From standpoint of the system efficiency, it is concluded that the presented heat storage kind has limited exergetic efficiency because of severe temperature drop at the solid–fluid interface in comparison to granular kind of heat storage devices. From the methodological standpoint, it is concluded that calculating the exergetic efficiency of the heat storage by direct computational fluid dynamics (CFD) analysis requires significant amount of walltime and computational resources. Originality/value The paper presents unconventional approach to using standard CFD tools by exploiting numerical diffusion to numerically suppress high-frequency solution oscillations. This strategy grants that the analysis, otherwise requiring impractically long computation walltime, is completed within a practical time.

scholarly journals Numerical study of heat and mass flow in layered heat storage

2018 ◽  
Vol 240 ◽  
pp. 01041
Author(s):  
Bartosz Ziegler ◽  
Jędrzej Mosiężny ◽  
Paweł Czyżewski
Keyword(s):  
Conjugate Heat Transfer ◽  
Gas Flow ◽  
Heat Storage ◽  
Numerical Study ◽  
Exergetic Efficiency ◽  
Key Factors ◽  
Transient Behaviour ◽  
Loading And Unloading ◽  
Layered Bed ◽  
Storage Type

An analysis of argon gas flow in exemplary configuration of layered bed thermal energy storage is presented. The analysis incorporates URANS model with conjugate heat transfer between gas and solid storage core. The aim of this analysis was to identify key factors limiting exergy efficiency of this storage type and determine some details about storage transient behaviour. Three full cycles of storage loading and unloading having 17 hours physical time in total are simulated, with calculation of exergetic efficiency for each of the cycles. Conclusions regarding this storage type feasibility for indirect power storage in pumped heat systems are made.

scholarly journals PENGGUNAAN PARAFFIN WAX SEBAGAI PENYIMPAN KALOR PADA PEMANAS AIR TENAGA MATAHARI THERMOSYPHON

ROTASI ◽  
2016 ◽  
Vol 18 (3) ◽  
pp. 76 ◽  
Author(s):  
Muhammad Nadjib
Keyword(s):  
Heat Transfer ◽  
Energy Storage ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Heat Storage ◽  
Paraffin Wax ◽  
Heat Transfer Fluid ◽  
Sensible Heat ◽  
Latent Heat Storage ◽  
Change Material

Pemanas Air Tenaga Matahari (PATM) konvensional umumnya menggunakan air sebagai penyimpan energi termal. Pemakaian sensible heat storage (SHS) ini memiliki kekurangan, diantaranya adalah densitas energinya rendah. Di sisi lain, latent heat storage (LHS) mempunyai sifat khas yaitu densitas energinya tinggi karena melibatkan perubahan fasa dalam penyerapan atau pelepasan kalor. Material LHS sering disebut phase change material (PCM). Penggunaan PCM pada PATM menarik dilakukan untuk meningkatkan densitas energi sistem. Penelitian ini bertujuan untuk menyelidiki perilaku termal penggunaan paraffin wax di dalam tangki PATM jenis thermosyphon. Penelitian menggunakan kolektor matahari pelat datar dan tangki thermal energy storage (TES) yang dipasang secara horisontal di sisi atas kolektor. Di dalam tangki terdapat alat penukar kalor yang terdiri dari sekumpulan pipa kapsul dimana di dalamnya berisi paraffin wax. Air digunakan sebagai SHS dan heat transfer fluid (HTF). Termokopel dipasang di sisi HTF dan sisi PCM. Piranometer dan sensor temperatur udara luar diletakkan di dekat kolektor matahari. Pengambilan data dilakukan selama proses charging. Temperatur HTF, PCM dan intensitas radiasi matahari direkam setiap 30 detik. Data ini digunakan untuk mengetahui evolusi temperatur HTF dan PCM. Berdasarkan evolusi temperatur ini kemudian dianalisis perilaku termal PATM. Hasil dari penelitian ini adalah bahwa paraffin wax telah berfungsi sebagai penyimpan energi termal bersama air di dalam tangki PATM jenis thermosyphon. PCM memberi kontribusi yang cukup signifikan terhadap kapasitas penyimpanan energi sistem. Efisiensi kolektor lebih optimal karena PCM dapat mempertahankan stratifikasi termal sampai akhir charging. Adanya PCM mampu mengendalikan penurunan efisiensi pengumpulan energi saat intensitas radiasi matahari menurun. Alat penukar kalor yang digunakan cukup efektif yang ditandai dengan kecepatan pemanasan rata-rata antara HTF dan PCM yang tidak berbeda jauh.

scholarly journals The Impact of Active and Passive Thermal Management on the Energy Storage Efficiency of Metal Hydride Pairs Based Heat Storage

Energies ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3006
Author(s):  
Serge Nyallang Nyamsi ◽  
Ivan Tolj
Keyword(s):  
Heat Transfer ◽  
Energy Storage ◽  
Thermal Management ◽  
Metal Hydride ◽  
Heat Storage ◽  
Energy Storage Density ◽  
Storage Efficiency ◽  
Transfer Enhancement ◽  
Storage Density ◽  
Energy Storage Efficiency

Two-tank metal hydride pairs have gained tremendous interest in thermal energy storage systems for concentrating solar power plants or industrial waste heat recovery. Generally, the system’s performance depends on selecting and matching the metal hydride pairs and the thermal management adopted. In this study, the 2D mathematical modeling used to investigate the heat storage system’s performance under different thermal management techniques, including active and passive heat transfer techniques, is analyzed and discussed in detail. The change in the energy storage density, the specific power output, and the energy storage efficiency is studied under different heat transfer measures applied to the two tanks. The results showed that there is a trade-off between the energy storage density and the energy storage efficiency. The adoption of active heat transfer enhancement (convective heat transfer enhancement) leads to a high energy storage density of 670 MJ m−3 (close to the maximum theoretical value of 755.3 MJ m−3). In contrast, the energy storage efficiency decreases dramatically due to the increase in the pumping power. On the other hand, passive heat transfer techniques using the bed’s thermal conductivity enhancers provide a balance between the energy storage density (578 MJ m−3) and the energy efficiency (74%). The utilization of phase change material as an internal heat recovery medium leads to a further reduction in the heat storage performance indicators (142 MJ m−3 and 49%). Nevertheless, such a system combining thermochemical and latent heat storage, if properly optimized, can be promising for thermal energy storage applications.

Solid Media Thermal Storage Development and Analysis of Modular Storage Operation Concepts for Parabolic Trough Power Plants

2007 ◽  
Vol 130 (1) ◽  
Author(s):  
Doerte Laing ◽  
Wolf-Dieter Steinmann ◽  
Michael Fiß ◽  
Rainer Tamme ◽  
Thomas Brand ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Power Plants ◽  
Heat Storage ◽  
Storage Systems ◽  
Storage System ◽  
Sensible Heat ◽  
Economic Optimization ◽  
Parabolic Trough ◽  
Solid Media ◽  
Exergetic Analysis

Cost-effective integrated storage systems are important components for the accelerated market penetration of solarthermal power plants. Besides extended utilization of the power block, the main benefits of storage systems are improved efficiency of components, and facilitated integration into the electrical grids. For parabolic trough power plants using synthetic oil as the heat transfer medium, the application of solid media sensible heat storage is an attractive option in terms of investment and maintenance costs. For commercial oil trough technology, a solid media sensible heat storage system was developed and tested. One focus of the project was the cost reduction of the heat exchanger; the second focus lies in the energetic and exergetic analysis of modular storage operation concepts, including a cost assessment of these concepts. The results show that technically there are various interesting ways to improve storage performance. However, these efforts do not improve the economical aspect. Therefore, the tube register with straight parallel tubes without additional structures to enhance heat transfer has been identified as the best option concerning manufacturing aspects and investment costs. The results of the energetic and exergetic analysis of modular storage integration and operation concepts show a significant potential for economic optimization. An increase of more than 100% in storage capacity or a reduction of more than a factor of 2 in storage size and therefore investment cost for the storage system was calculated. A complete economical analysis, including the additional costs for this concept on the solar field piping and control, still has to be performed.

scholarly journals A finite element analysis on combined convection and conduction in a channel with a thick walled cavity

2014 ◽  
Vol 24 (8) ◽  
pp. 1888-1905 ◽  
Author(s):  
M.M. Rahman ◽  
Hakan Oztop ◽  
S. Mekhilef ◽  
R. Saidur ◽  
A. Chamkha ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Finite Element ◽  
Mixed Convection ◽  
Conjugate Heat Transfer ◽  
Transfer Problem ◽  
Thick Wall ◽  
Thermal Conductivity Ratio ◽  
Element Analysis ◽  
Content Type ◽  
Combined Convection

Purpose – The purpose of this paper is to examine the effects of thick wall parameters of a cavity on combined convection in a channel. In other words, conjugate heat transfer is solved. Design/methodology/approach – Galerkin weighted residual finite element method is used to solve the governing equations of mixed convection. Findings – The streamlines, isotherms, local and average Nusselt numbers are obtained and presented for different parameters. It is found heat transfer is an increasing function of dimensionless thermal conductivity ratio. Originality/value – The literature does not have mixed convection and conjugate heat transfer problem in a channel with thick walled cavity.

Thermal Conductivity Enhancement in a Latent Heat Storage Device

2013 ◽  
Vol 860-863 ◽  
pp. 590-593
Author(s):  
Cha Xiu Guo ◽  
Ding Bao Wang ◽  
Gao Lin Hu
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Solid State ◽  
Liquid Phase ◽  
Phase Change ◽  
Latent Heat ◽  
Heat Storage ◽  
Storage Device ◽  
Latent Heat Storage ◽  
Conductivity Enhancement

High conductivity porosity materials are proposed to enhance the phase change materials (PCM) in order to solve the problem of low conductivity of PCM in the latent heat storage device (LHSD), and two-dimensional numerical simulation is conducted to predict the performance of the PCM by CFD software. During the phase change process, the PCM is heated from the solid state to the liquid phase in the process of melting and from the liquid phase to the solid state in the solidification process. The results show that porosity materials can improve heat transfer rate effectively, but the effect of heat transfer of Al foam is superior to that of graphite foam although the heat storage capacity is almost the same for both. The heat transfer is enhanced and the solidification time of PCM is decreased since the effective thermal conductivity of composite PCM is increased.

Analysis on unsteady heat transfer and fluid flow through sensible heat storage system

2021 ◽  
Author(s):  
Sasikumar C ◽  
Sundaresan R ◽  
Rajaganapthy C ◽  
Nagaraj M ◽  
Radha Krishnan Beemaraj
Keyword(s):  
Heat Transfer ◽  
Fluid Flow ◽  
Heat Storage ◽  
Storage System ◽  
Sensible Heat ◽  
Unsteady Heat Transfer ◽  
Flow Through
Sign in / Sign up

Export Citation Format

Share Document