scholarly journals Enterprises' perception and practice of humane entrepreneurship

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Anna Dębicka ◽  
Karolina Olejniczak ◽  
Joanna Skąpska
Keyword(s):  
Single Case ◽  
Business Practice ◽  
Actual State ◽  
Content Type ◽  
Exploratory Stage ◽  
Management Hierarchy ◽  
Trends Over Time ◽  
New Research ◽  
Quantitative And Qualitative Methods

PurposeAs a new concept for humane entrepreneurship (HumEnt) evolves, many new research questions arise. At the exploratory stage, the authors found it relevant to examine and discuss the perception of the fundamental assumptions of the HumEnt concept and activities undertaken in this area by business practice.Design/methodology/approachTo thoroughly understand the studied phenomenon, a combination of quantitative and qualitative methods was used. An exploratory survey was obtained from 126 purposefully selected enterprises in Poland; then, a single case study was analysed.FindingsThe conducted analysis showed differences between the activities of enterprises and the perception of the HumEnt concept among employees that are especially noticeable at different levels of the management hierarchy.Research limitations/implicationsThe multifaceted nature of the results obtained is limited by the inability to infer international differences, to capture trends over time and to generalise to the total population of enterprises.Practical implicationsAlthough the surveyed companies recognise the importance of the HumEnt concept, it is not tantamount to its execution. The research results may be valuable, especially for smaller enterprises, where the business practice may require support in applying the HumEnt approach.Originality/valueThe research explored both the actual state confirmed by the actions taken and the perception of the importance of individual elements of HumEnt. A knowing–doing gap has been demonstrated between these planes. Moreover, thanks to a two-stage study, practices were selected that can be successfully implemented also in small and medium-sized enterprises.

scholarly journals Increasing project benefits by project opportunity exploitation

2018 ◽  
Vol 11 (1) ◽  
pp. 35-52 ◽  
Author(s):  
Pernille Eskerod ◽  
Karyne Ang ◽  
Erling S. Andersen
Keyword(s):  
Rare Species ◽  
Single Case ◽  
Business Case ◽  
Research Area ◽  
Single Case Study ◽  
Content Type ◽  
Opportunity Exploitation ◽  
Long Time ◽  
New Research

Purpose Exploitation of project opportunities may bring more benefits than stipulated in the initial business case, and even stakeholder benefits that nobody thought of at the project initiation. The purpose of this paper is to suggest a new research area for megaprojects, i.e. the phenomenon of project opportunity exploitation as a means to increase the project benefits. Design/methodology/approach This is a single case study of an infrastructure megaproject, i.e. the construction and operation of a 50+ years old American bridge. Data cover information regarding 60+ years old historical documents, newspaper articles, interviews and video-recordings. Findings The findings of this paper are as follows: exploiting all opportunities created by the project and increasing project benefits require involvement from many categories of stakeholders; stakeholders get more involved in exploiting the opportunities created by the project when they are proud of the project; for some of the project-related opportunities, it might take a long time before they can be exploited (and related benefits achieved); and celebrating achievements of the project stimulate stakeholders to exploit opportunities created by the project and contribute to further project benefits. Research limitations/implications Only few interviews were conducted. Interviewees were biased as all were very proud of the bridge. This is a single case study of a “rare species”, not representing most megaprojects. Practical implications To enhance project opportunity exploitation and increased benefits, the project owner (team) must continuously communicate about the project, also after project execution. Originality/value This study contributes to a gap within the literature on the phenomenon “project opportunity exploitation”. This is a very rich case study and of a “rare species”.

Knowledge transfer roles of subsidiaries in MNCs’ networks

2019 ◽  
Vol 29 (4) ◽  
pp. 329-346 ◽  
Author(s):  
Cigdem Baskici
Keyword(s):  
Knowledge Transfer ◽  
Single Case ◽  
Research Question ◽  
Hierarchical Structures ◽  
Knowledge Flows ◽  
Consumer Electronics ◽  
Knowledge Network ◽  
Content Type ◽  
Knowledge Based

Purpose Although there have been a considerable number of studies regarding subsidiary role typology in multinationals’ management literature, there appear to be few studies that consider knowledge-based role typology from the network-based perspective. The purpose of this study is to fill this gap and extend the study of Gupta and Govindarajan (1991). Thus, the study focuses on answering the following research question: Do subsidiaries have different roles in terms of knowledge flows within a multinational company (MNC)? Design/methodology/approach This empirical study has been carried out as an explorative single case study. An MNC with 15 foreign subsidiaries headquartered in Turkey, which operated in the manufacturing of household appliances and consumer electronics, has been selected as the case. Knowledge transfer is analyzed in this MNC from the network perspective. Findings Four role typologies are detected for subsidiaries of the MNC: collector transmitter, collector diffuser, converter transmitter and converter diffuser. Research limitations/implications Findings of this study are specific to this case. Testing the findings in a sample consisting of subsidiaries of MNCs producing transnational products may contribute to the generalizability of these roles. Practical implications This study offers potentially important findings for MNC managers to use. First, in this study, knowledge flows' route could be defined within MNCs’ dual network. Second, role typologies could inform MNC managers to design their MNCs’ knowledge network. Originality/value The suggested typologies are expected to more accurately define the roles of subsidiaries within contemporary MNCs which are accepted to be transformed from hierarchical structures to network-based organizations.

Frozen child: schema therapy for a forensic patient in a service for men with a diagnosis of severe personality disorder

2016 ◽  
Vol 18 (4) ◽  
pp. 254-264 ◽  
Author(s):  
Asad Ul Lah ◽  
Jacqui Saradjian
Keyword(s):  
Personality Disorder ◽  
Service User ◽  
Single Case ◽  
Schema Therapy ◽  
Content Type ◽  
Protective Strategy ◽  
Personal Reflections ◽  
Participant Observer ◽  
Severe Personality Disorder

Purpose Schema therapy has gone through various adaptations, including the identification of various schema modes. The purpose of this paper is to suggest that there may be a further dissociative mode, the “frozen child” mode, which is active for some patients, particularly those that have experienced extreme childhood trauma. Design/methodology/approach The paper is participant observer case study which is based on the personal reflections of a forensic patient who completed a treatment programme which includes schema therapy. Findings The proposed mode, “frozen child”, is supported by theoretical indicators in the literature. It is proposed that patients develop this mode as a protective strategy and that unless recognised and worked with, can prevent successful completion of therapy. Research limitations/implications Based on a single case study, this concept is presented as a hypothesis that requires validation as the use of the case study makes generalisation difficult. Practical implications It is suggested that if validated, this may be one of the blocks therapists have previously encountered that has led to the view that people with severe personality disorder are “untreatable”. Suggestions are made as to how patients with this mode, if validated, can be treated with recommendations as to the most appropriate processes to potentiate such therapy. Originality/value The suggestion of this potential “new schema mode” is based on service user initiative, arising from a collaborative enterprise between service user and clinician, as recommended in recent government policies.

scholarly journals Innovation and cross-functional teams

2018 ◽  
Vol 24 (1/2) ◽  
pp. 84-105 ◽  
Author(s):  
Daniel Marasquini Stipp ◽  
Márcio Lopes Pimenta ◽  
Daniel Jugend
Keyword(s):  
Single Case ◽  
Field Research ◽  
Incremental Innovation ◽  
Future Research ◽  
Content Type ◽  
The Public ◽  
Tax Management ◽  
Functional Teams ◽  
Practical Implications

Purpose The aim of this paper is to characterize how innovation may happen through cross-functional teams (CFT) in an organization of the public sector. Design/methodology/approach A case study helped to characterize several behavior patterns, team structures and respective links with generating innovation in internal processes and public answering contexts. Findings The results highlight that formal-temporary teams present a higher capacity to generate incremental innovation in products, whereas permanent-informal teams have a higher capacity to generate innovation in the internal processes and public answering contexts. Research limitations/implications The limitations of this research relate to the fact that this is a single case study, and although it is an important case to examine innovation and CFTs, by its very nature, it is not possible to extend and generalize the obtained data to other organizations. The evaluation of its propositions was merely qualitative, and future research is needed to validate its characteristics. Practical implications Several settings of CFTs are presented, as well as their ability to generate different types of innovation, such as the computerization of documents, petitions and papers, which decreases the time to answer the taxpayer. Moreover, CFTs can help to create products, such as computer programs that can be used not only locally but also in several public organizations related to tax management. Originality/value The field research provides the perceptions of the respondents regarding CFT characteristics that can lead to specific types of innovation, as well as the types of products or services that can be generated by these processes.

Implementation of lean in IT SME company: an Italian case

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Marco Torri ◽  
Kaustav Kundu ◽  
Stefano Frecassetti ◽  
Matteo Rossini
Keyword(s):  
Manufacturing Industry ◽  
Service Sector ◽  
Manufacturing Sector ◽  
Single Case ◽  
Value Added ◽  
Lean Implementation ◽  
Content Type ◽  
Italian Case ◽  
Lean Practices

Purpose In spite of huge advancement of Lean in the manufacturing sector, its advantage in the service sector is not fully investigated. The purpose of this paper is to cover this gap in particular for the information technology (IT) sector through the implementation of the Lean philosophy in a small- and medium-sized enterprise (SME), operating in the IT sector. Design/methodology/approach A case study is conducted and following the A3 model, Lean is deployed in the case company. Data were collected through on-site interviews, waste sources were identified and then countermeasures for their reduction were proposed and adopted. Findings This study reveals that the implementation of the Lean practices in an SME operating in the IT sector offers good operative and financial results, thanks to the higher productivity obtained through the reduction of non-value-added activities. Research limitations/implications This paper reports a single case study, not enough to generalize the results. Moreover, more Lean tools and practices should be tested in IT companies to assess their effectiveness. Practical implications This paper increments the knowledge base for the application of Lean and A3 model outside the manufacturing industry. This paper should assist practitioners and consultants who have the desire to understand a better way of Lean implementation in fast-growing IT industry and in SME. Originality/value Research on Lean implementation in an SME company and in IT sector is scarce. This study aims to assess the efficiency of the adoption of Lean practices following the A3 model. The results could be highly valuable for similar companies (dimension or sector), especially those that are facing transition situations in terms of size and at the same time want to improve their operations performance, efficiency and avoid waste.

A topic modeling analysis of Korea’s T&I research trends in the 2010s

Babel ◽  
2021 ◽  
Author(s):  
Changsoo Lee
Keyword(s):  
Topic Modeling ◽  
Research Output ◽  
Research Trends ◽  
Korean Language ◽  
Modeling Analysis ◽  
Trends Over Time ◽  
New Research ◽  
Topic Structure ◽  
Manual Classification

Abstract The present study aims to demonstrate the relevance of topic modeling as a new research tool for analyzing research trends in the T&I field. Until now, most efforts to this end have relied on manual classification based on pre-established typologies. This method is time- and labor-consuming, prone to subjective biases, and limited in describing a vast amount of research output. As a key component of text mining, topic modeling offers an efficient way of summarizing topic structure and trends over time in a collection of documents while being able to describe the entire system without having to rely on sampling. As a case study, the present paper applies the technique to analyzing a collection of abstracts from four Korean Language T&I journals for the 2010s decade (from 2010 to 2019). The analysis proves the technique to be highly successful in uncovering hidden topical structure and trends in the abstract corpus. The results are discussed along with implications of the technique for the T&I field.

The impact of business networks on foreign subsidiaries development

IMP Journal ◽  
2018 ◽  
Vol 12 (3) ◽  
pp. 427-443
Author(s):  
Enrico Baraldi ◽  
Francesco Ciabuschi ◽  
Olof Lindahl ◽  
Andrea Perna ◽  
Gian Luca Gregori
Keyword(s):  
Single Case ◽  
Foreign Market ◽  
Business Networks ◽  
International Expansion ◽  
Content Type ◽  
Fine Grained ◽  
Automatic Control Systems ◽  
Industrial Networks ◽  
The Impact

Purpose The purpose of this paper is to explore two specific areas pertaining to industrial networks and international business (IB). First, the authors look at how business relationships influence the internationalization in time, from the establishment of the first subsidiary in a foreign market to the following ones, and in space, that is, across different markets. Second, the authors investigate how an increasing external network dependence of subsidiaries in their internationalization may cause a detachment of a subsidiary from the mother company as its knowledge becomes insufficient to guide a subsidiary’s internationalization. Design/methodology/approach This paper utilizes an exploratory, longitudinal, single-case study of Loccioni – a manufacturer of measuring and automatic control systems for industrial customers – to illustrate the specific dynamics of the influences of industrial networks on the internationalization of subsidiaries. Findings The case study helps to elucidate the roles, entailing also free will and own initiative, of small suppliers’ subsidiaries which operate inside several global factories, and how “surfing” on many different global factories, by means of several local subsidiaries, actually supports these suppliers’ own international developments. This notion adds to our understanding of the global factory phenomenon a supplier focus that stresses how the role of suppliers is not merely that of being passive recipients of activities and directions from a focal orchestrating firm, but can also be that of initiative-takers themselves. Originality/value The paper contributes to the IMP tradition by providing a multi-layered and geographically more fine-grained view of the network embedding companies that operate on internationalized markets. This paper thereby sheds light on a less investigated area of research within the IMP tradition: the link between internationalization in different countries and the interconnectedness between the industrial networks spanning these countries. At the same time, this paper contributes to IB theories by showing how a late-internationalizing SME can enter highly international markets by “plugging into” several established “Global Factories” as a way to exploit further opportunities for international expansion.

scholarly journals How performance measurement influences stakeholders in not-for-profit organizations

2017 ◽  
Vol 37 (9) ◽  
pp. 1164-1184 ◽  
Author(s):  
Haley Allison Beer ◽  
Pietro Micheli
Keyword(s):  
Performance Measurement ◽  
Single Case ◽  
Institutional Logics ◽  
Performance Goals ◽  
Content Type ◽  
For Profit ◽  
Not For Profit ◽  
And Performance ◽  
The Uk

Purpose The purpose of this paper is to examine the influences of performance measurement (PM) on not-for-profit (NFP) organizations’ stakeholders by studying how PM practices interact with understandings of legitimate performance goals. This study invokes institutional logics theory to explain interactions between PM and stakeholders. Design/methodology/approach An in-depth case study is conducted in a large NFP organization in the UK. Managers, employees, and external partners are interviewed and observed, and performance-related documents analyzed. Findings Both stakeholders and PM practices are found to have dominant institutional logics that portray certain goals as legitimate. PM practices can reinforce, reconcile, or inhibit stakeholders’ understandings and propensity to act toward goals, depending on the extent to which practices share the dominant logic of the stakeholders they interact with. Research limitations/implications A theoretical framework is proposed for how PM practices first interact with stakeholders at a cognitive level and second influence action. This research is based on a single case study, which limits generalizability of findings; however, results may be transferable to other environments where PM is aimed at balancing competing stakeholder objectives and organizational priorities. Practical implications PM affects the experience of stakeholders by interacting with their understanding of legitimate performance goals. PM systems should be designed and implemented on the basis of both their formal ability to represent organizational aims and objectives, and their influence on stakeholders. Originality/value Findings advance PM theory by offering an explanation for how PM influences attention and actions at an individual micro level.

Supply chain integration and coordination for international sourcing in the context of China’s processing trade

2018 ◽  
Vol 118 (9) ◽  
pp. 1730-1748 ◽  
Author(s):  
Mingu Kang ◽  
Kihyun Park ◽  
Ma Ga (Mark) Yang ◽  
Mark H. Haney
Keyword(s):  
Supply Chain ◽  
Single Case ◽  
Supply Chain Integration ◽  
Processing Trade ◽  
Content Type ◽  
Study Approach ◽  
International Sourcing ◽  
Three Stages ◽  
Simple Assembly

Purpose The purpose of this paper is to explore how a foreign invested manufacturing company’s (FIMC) components sourcing process evolves in order to improve its supply chain outcomes in the context of China’s processing trade. Design/methodology/approach Grounded in the theory bases of the international sourcing process and supply chain integration, this study utilizes a single-case-study approach with a small- to medium-sized FIMC engaged in China’s processing trade. Findings This study identifies three stages of the components sourcing process: simple assembly stage, components localization stage and supply chain integration stage. In addition, the case study suggests that the type of processing trade evolves from processing with supplied materials to processing with imported materials as the sourcing process proceeds through the three stages and the internal and external environments change. Originality/value To our knowledge, this paper is the first to focus on an FIMC’s components sourcing process in the context of China’s processing trade. It contributes to a better understanding of how FIMCs progress through the components sourcing process and apply different types of processing trade in China to maximize their supply chain outcomes.

“Speaking truth to power”: analysing shadow reporting as a form of shadow accounting

2017 ◽  
Vol 30 (3) ◽  
pp. 510-533 ◽  
Author(s):  
Helen Tregidga
Keyword(s):  
Power Relations ◽  
Design Methodology ◽  
Empirical Investigation ◽  
Single Case ◽  
Senior Management ◽  
Single Case Study ◽  
Content Type ◽  
Transformative Potential ◽  
Perceived Impacts

Purpose The purpose of this paper is to empirically investigate the act of shadow reporting by a social movement organisation as a form of shadow accounting within a sustained campaign against a target corporation. Situated within a consideration of power relations, the rationales underlying the production of the shadow report, and the shadow reports perceived value and limits as a shadow accounting mechanism, are investigated. Design/methodology/approach A Foucauldian approach to power/knowledge and truth is drawn upon in the analysis of a single case study. Alongside a consideration of the shadow report itself, interviews with both the preparers of the report and senior management of the corporation targeted comprise the main data. Findings The paper provides an empirical investigation into shadow reporting as a form of shadow accounting. While a range of insights are garnered into the preparation, dissemination and impact of the shadow report, key findings relate to a consideration of power relations. The perceived “truth” status of corporate accounts compared to accounts prepared by shadow accountants is problematised through a consideration of technologies of power and power/knowledge formations. Power relations are subsequently recognised as fundamental to the emancipatory potential of shadow reporting. Research limitations/implications Results from a single case study are presented. Furthermore, given the production of the shadow report occurred several years prior to the collection of data, participants were asked to reflect on past events. Findings are therefore based on those reflections. Originality/value While previous studies have considered the preparation of shadow reports and their transformative potential, this study is, the author believes, the first to empirically analyse the preparation, dissemination and perceived impacts of shadow reporting from the perspectives of both the shadow report producers and the target corporation.

Sign in / Sign up

Export Citation Format

Share Document