scholarly journals Evaluation of the integration level of quality and environmental management systems in a tire manufacturer

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Thais Coutinho Gonçalves Silva ◽  
Rosley Anholon ◽  
Izabela Simon Rampasso ◽  
Osvaldo Luiz Gonçalves Quelhas ◽  
Walter Leal Filho ◽  
...  

PurposeThis article aims to evaluate the integration level of a quality management system (QMS) and an environmental management system (EMS) in a tire manufacturer and propose a guide to evaluate the integration of these systems in companies.Design/methodology/approachThe methodological strategies used in this research were literature review; and case study, with interviews to verify professionals' perception about benefits from integration. Data from interviews were analyzed through Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS).FindingsThe results showed that the studied company has a simple level of integration, observing only some low intensity benefits. Thus, it was recommended that the company partially integrate its management systems (MSs) before evolving into something more complex. The literature and the findings of case study were used as basis for proposing a guide to evaluate MS integration.Originality/valueLessons learned throughout the study and the suggested guide can support other companies to assess the integration level of their QMS and EMS. Thus, the findings presented here can be useful for researchers and managers.

2019 ◽  
Vol 9 (7) ◽  
pp. 1377
Author(s):  
Valery V. IOSIFOV ◽  
Svetlana V. RATNER

Nowadays one of the most common organizational eco-innovations in energy companies is introducing environmental management systems (EMS). Nevertheless, the issues of environmental and economic efficiency of EMS remain controversial. The purpose of this work is to develop a methodology for assessing the effectiveness of environmental management systems of Russian energy companies certified in accordance with ISO 14001. Since Russian companies do not have EMAS conformance certificates, the issues of the effectiveness of environmental management systems under the European Environmental Management Scheme and eco-audit were not considered in this study. The study is based on the data from annual corporate reports of the largest energy companies of the Russian Federation, which have the organizational and legal form of public joint-stock companies. The selection criteria were: i) the existence of an integrated management system, which is based on a certified environmental management system; ii) the presence in the corporate reports of data on the environmental performance of the company, at least a few years before and after the introduction of EMS, sufficient for statistical analysis using a two depended samples T-test. The study has shown that the application of ISO 14001 can be considered as a condition for the development of eco-innovation, as a well-designed environmental management strategy covers the whole range of issues related to innovative development, modernization and competitiveness. The introduction of EMS is also associated with an increase in the information transparency of the entire production system of the company, which is also a positive point in terms of the development of innovative processes.


2016 ◽  
Author(s):  
Charlie Williams ◽  
Om Chawla

Abstract Introduction In the United States, the Bureau of Safety and Environmental Enforcement (BSEE) requires an offshore lease operator to implement a Safety and Environmental Management System (SEMS), and to have it audited at least once every 3 years to evaluate its compliance to the regulatory requirements detailed in 30 CFR 250, Subpart S. The first round of these SEMS audits, which concluded in 2013, was executed using varying audit styles – from system audits through to compliance audits. These varying audit styles, in turn, lead to differing types output, levels of detail, format and presentation.These diverse approaches may have been due, at least in part, to disparities in the expectations of stakeholders, differing interpretations of the use of the Center for Offshore Safety's (COS) SEMS Audit Protocol tools, use of other audit protocols, the experience-level of individual auditors, and the newness of the regulation. System audits are intended to be a holistic assessment of a system, its elements, and how the elements work together to achieve system objectives. Compliance audits, on the other hand, are intended to assess adherence to specific requirements. This white paper proposes that both types of audits should be used in tandem to reduce risk and increase confidence that a management system, and its verification programs, is operating as designed and meeting regulatory and company requirements.


2021 ◽  
Vol 29 (1) ◽  
pp. 20-24
Author(s):  
A.E. Sorokin ◽  
◽  
E.E. Galkina ◽  

The introduction of environmental management systems (EMS) at enterprises makes it possible to put into practice the principles of sustainable development. The efficiency of the environmental management system largely depends on the information support of the system. The use of information technology, electronic document management allows you to increase the effectiveness of the EMS at the enterprise.


2012 ◽  
Vol 6 (2) ◽  
pp. 157
Author(s):  
Janet Morrill ◽  
Sylvie Berthelot

This study provides evidence of the value of third party certification of environmental management systems. We examine the relative importance of improving an environmental management system as a result of certification, versus being able to communicate the quality of that system credibly to outsiders through third party certification. We use survey data where one half of the respondents had indicated that they had an environmental management (EMS) in place before seeking ISO 14001 certification, while the other half of respondents did not. Our analyses comparing the two groups find that the group already having an EMS report similar motivations for ISO 14001 certification and perceive to have received similar levels of benefits as firms having no pre-certification EMS. We conclude that even for organizations that already have an EMS, the ability to communicate credibly the quality of that system is a compelling reason to obtain ISO certification.


Author(s):  
Yoram (Jerry) Arnoni

Abstract There is increasing interest all over the world in Environmental Management Systems. Many Japanese electronic companies have mandated that their plants should be registered to ISO 14001 irrespective of what country they are located in. The big three automobile manufacturers in the United States have requested their suppliers to become registered to ISO 14001 within the next few years. The EPA is openly supporting Environmental Management Systems including ISO 14001. Twenty-two US States have enacted legislation that encourages voluntary environmental audits by granting immunity to certain non-compliance issues that was discovered during the audit, providing prior notice of the audit was given to the state and the auditee had no prior knowledge of the non-compliance. In response to the interest in Environmental Management Systems, this paper highlights the process flow from one environmental core element to the next in flow diagrams and gives examples from a number of implemented systems. There are a number of system concepts comprising of core elements that are described in ISO 14001 but the link between the core elements are not always immediately obvious. The main processes are as follows: • Identifying aspects, evaluating which are significant and then implementing control procedures for those issues, monitoring/measuring the outcome of the controls and reporting to management for corrective action or continuous improvement. • Identification of regulatory issues that apply to the organizations activities, keeping up to date with regulatory changes and reporting to regulatory offices as may be required. • Identifying which aspects that the organization wishes to pursue as an improvement program. The improvement program will include objectives, measurable targets for those objectives, the means by which those objectives will be achieved, the time frame and people responsible for the program. • Internal assessments, corrective actions, preventive actions and management review and re-action. An understanding of the EMS core elements and their inter relationship will be of interest to those who are considering implementing an Environmental management System in their organization.


2021 ◽  
Author(s):  
Anahita Asadolahniajami

The purpose of the thesis was to explore the potential benefits of applying the key principles of Six sigma to Environmental Management Systems (EMSs). A survey of peer-reviewed literature on Six sigma and EMSs was developed. The application of the conceptual framework is demonstrated in a case study. The case study focused on a major Middle Eastern manufacturing company. The case study showed that there were numerous benefits to applying the principles of Six sigma to EMSs. An approach based on the conceptual framework was successful in reducing waste in the case company's paint shop by 80%. Other benefits of applying the conceptual framework included cost reduction, decreased consumption of raw materials, decreased amount of waste water, longer resource life through reduced usage, reduced materials, decreased amount of waste water, longer resource life through reduced usage, reduced emissions, reduced energy consumption, and improved employee health and safety due to less exposure to harmful chemicals. The conceptual framework provides a basis for applying the principles of Six sigma to EMSs. While there is a significant amount of research focusing on the integration of quality and environmental management, the application of Six sigma in the context of environmental management has not been widely discussed. It is anticipated that the results will be of interest to practitioners and researchers in quality and environmental management.


2021 ◽  
Author(s):  
Anahita Asadolahniajami

The purpose of the thesis was to explore the potential benefits of applying the key principles of Six sigma to Environmental Management Systems (EMSs). A survey of peer-reviewed literature on Six sigma and EMSs was developed. The application of the conceptual framework is demonstrated in a case study. The case study focused on a major Middle Eastern manufacturing company. The case study showed that there were numerous benefits to applying the principles of Six sigma to EMSs. An approach based on the conceptual framework was successful in reducing waste in the case company's paint shop by 80%. Other benefits of applying the conceptual framework included cost reduction, decreased consumption of raw materials, decreased amount of waste water, longer resource life through reduced usage, reduced materials, decreased amount of waste water, longer resource life through reduced usage, reduced emissions, reduced energy consumption, and improved employee health and safety due to less exposure to harmful chemicals. The conceptual framework provides a basis for applying the principles of Six sigma to EMSs. While there is a significant amount of research focusing on the integration of quality and environmental management, the application of Six sigma in the context of environmental management has not been widely discussed. It is anticipated that the results will be of interest to practitioners and researchers in quality and environmental management.


Sign in / Sign up

Export Citation Format

Share Document